Ezviz LC1 Bedienungsanleitung

www.ezvizlife.com

Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred

to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not

make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in

the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).

Revision Record

New release – January, 2019

Trademarks Acknowledgement

™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD

PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG

OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED

OF THE POSSIBILITY OF SUCH DAMAGES.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.

EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION

OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY

THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY

LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF

REQUIRED.

SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Regulatory Information

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio

Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to

your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.

2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the

product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For

proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

Гарантийный срок-1 год

Срок службы-3 года

Производитель:Ханджоу Хиквижн Диджитал Технолоджи(Китай)

Импортер-поставщик в России: ЗАО ''Хиквижн''

Импортер-поставщик в Республике Беларусь:ООО ''Торговый Дом ''АВАНТ-ТЕХНО''

Сайт:www.ezviz.ru

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

EC DECLARATION OF CONFORMITY

Hereby, Hangzhou EZVIZ Software Co.,Ltd. declares that the radio equipment type [CS-LC1] is in compliance with Directive 2014/53/EU.

The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:

http://www.ezvizlife.com/declaration-of-conformity.

Safety Instruction

CAUTION: THE BLUE LIGHT DAMAGE OF THIS PRODUCT TO THE EYES IS CLASSIFIED AS CATEGORY 1. DO NOT OBSERVE THE LIGHT IN SHORT DISTANCE. DO NOT TURN ON THE LIGHT DURING ASSEMBLY,

INSTALLATION AND MAINTENANCE, IF MUST, PLEASE FULLY PROTECT EYES BY WEARING PROTECTIVE EYEWEAR.

GENERAL: All ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODE (N.E.C) STANDARDS. IF YOU ARE UNFAMILIAR WITH PROPER ELECTRICAL WIRING

CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.

WARNING-TO HELP PREVENT THE POSSIBILITY OF ELECTRICAL SHOCK, THE USE OF RUBBER SOLE SHOES IS RECOMMENDED. EXERCISE CARE, UDE WORK GLOVES WHEN HANDLING THE FIXTURE TO AVOID CUTS

OR ABRASIONS.

Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the package.

Customer Service

For more information, please visit www.ezvizlife.com.

Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our local contact details.

SAVE THIS MANUAL FOR FUTURE REFERENCE

What's in the Box

Security Light Camera

Wire Connector (x3)

O-ring (x3)

Mounting Screw (x3)

Anchor (x3)

Screwdriver (x1)

Mount and connect the Security Light Camera. Quick Start Guide (x1)

Security Light Camera

Base

Base Plate

Light Base Ring (Pan)

Light Arm Screw (Tilt)

Light Ring (Rotation)

Camera Arm and Ball-Joint

microSD Card and Reset Button (Behind the Door)

Lens

Camera

Security Light

Name Description

Light Base Ring (Pan) Loosen the base ring and pan up to 360º. Tighten the base ring when you have the light panned the way you want.

Light Arm Screw (Tilt) Loosen the arm screw and tilt the arm up to 180º. Tighten the screw when you have the arm in the position you want.

Light Ring (Rotation) Loosen the light ring and rotate the light up to 360º. Tighten the screw when you have the light in the position you want.

Camera Arm and Ball-Joint Move the camera arm in its ball joint until you have the camera in the position you want.

Make sure the base ring and adjustment screws are tightened all the way for each adjustment before proceeding.

microSD Card •Recommended compatibility: Class 10, Max.128GB.

•Initialize the card in the EZVIZ app before using it.

Reset Button Hold for 5 seconds to restart and reset all parameters to default.

Security Light Camera Installation

Step1 Shut off the electricity at the breaker that controls security light's circuit.

Step2 Separate the base plate from the security light camera.

1. Unscrew the 3 base screws.

Base screw

2. Pull the security light camera off the base plate and unplug the

3-wire connector from the base.

3-wire connector

3. After separating the base plate from the camera, the effect picture is

shown as below.

Step3 Fix the base plate to the wall.

1. Pick a clean and ﬂat surface.

2. Drill two holes and insert anchors.

3. Fix the base plate to the wall with o-ring and mounting screws.

Anchor Mounting ScrewO-ring

When installing the base plate, make sure the logo (UP) faces upward.

Recommended Installation Height: 10 feet (3 m) above the ground.

Recommended Drill Bit: Ø6 spec drill bit.

Recommended Hole Depth: 0.13 feet to 0.14 feet (40 to 43 mm).

Step4 Mount the security light camera to the base plate

1. Plug the 3-wire connector back into the security light camera as shown. Make sure it’s completely

seated before proceeding.

2. Fix the security light camera to the base plate with base screws.

Step5 Connect the junction box and the base 3-wire connector

1. Match each color wire from the base plate to the same color from the junction box (blue to blue, yellow-

green to yellow-green, brown to brown).

IP65 Junction Box

*Purchased Seperately

2. You may use the wire connector for special junction box, then connect the wires as below.

IP65 Junction Box

*Purchased Seperately

Put the ends of each pair into the wire connector, then twist it tightly.

Step6 Turn on power to your security light’s circuit. Step7 Conﬁrm the security light camera has power

At ﬁrst power up, the security lights turn on. when the security lights turn off and the LED indicator on the front

of the camera ﬂashes blue, the security light camera is ready for setup.

LED Indicator

If you’ve installed the security light

camera on a switchable outlet, make

sure you turn the outlet on and leave

it on for the security light camera to

function 24/7.

LBrown

Yellow-green

NBlue

LBrown

Yellow-green

NBlue

Security Light Camera Setup

1.Create an user account

- Connect your mobile phone to Wi-Fi.

- Download and install the EZVIZ app by searching “EZVIZ” in App Store or Google PlayTM.

- Launch the app and register for an EZVIZ user account following the start-up wizard.

2.Add a security light camera to EZVIZ

- Log in the EZVIZ app.

- From the EZVIZ app Home screen, tap “+” on the upper-right hand corner to go to the scan QR code interface.

- Scan the QR Code on the the security light camera.

- Follow the EZVIZ app wizard to ﬁnish Wi-Fi conﬁguration.

If you want to change your security light camera's Wi-Fi, press and hold the reset button for 5s and repeat this part.

•The security light camera works with 2.4GHz Wi-Fi signals. If you have a dual-band router with separate 2.4GHz and 5GHz networks, make sure your phone is connected to the 2.4GHz one.

•If your Wi-Fi network signal is less than 50% where you want to install the security light camera ,a Wi-Fi signal extender is recommended to boost the signal at the installation point.

Appendix

Install Memory Card (Optional)

- Remove the door on the side of the camera.

- Remove the silicone plug.

- Insert a microSD card into the slot until a click.

- Put the silicone plug back and make sure it is fully plugged in the SD card slot.

- Place the door cover back on.

Initialize Memory Card

1. In the EZVIZ app, check the memory card status by tapping on the Storage Status in the Device Settings interface.

2. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal.

For detailed information, please visit www.ezvizlife.com.

Contenu de la boîte

Caméra avec éclairage de sécurité

Connecteur de câbles (x3)

Joint torique (x3)

Vis de montage (x3)

Cheville (x3)

Tournevis (x1)

Montez et connectez la

caméra avec l'éclairage de sécurité. 1guide de démarrage rapide

Caméra avec éclairage de sécurité

Base

Plaque de la base

Bague de la base de la lampe (panoramique)

Vis d'étrier de la lampe (inclinaison)

Bague de la lampe (rotation)

Bras de caméra et joint à rotule

Logement pour carte microSD et touche

de réinitialisation (sous un couvercle)

Objectif

Caméra

Lumière de sécurité

Nom Description

Bague de la base de la lampe (panoramique) Dévissez la bague de la base et pivotez sur 360°. Vissez la bague de la base lorsque la lumière pointe dans la direction désirée.

Vis d'étrier de la lampe (inclinaison) Dévissez la vis de bras et inclinez le bras sur 180°. Vissez la vis lorsque le bras se trouve dans la position désirée.

Bague de la lampe (rotation) Dévissez la bague de la lampe et tournez l’ampoule sur 360°. Vissez la vis lorsque l’ampoule se trouve dans la position désirée.