Ezviz W3 Bedienungsanleitung
Multi-Band Wireless Gigabit Router
About the Documents
The documents include instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the documents is subject to change, without notice, due to firmware updates or
other reasons. Please find the latest version in the website (http://www.ezvizlife.com).
Any and all information, including, among others, wordings, pictures, graphs are the properties of EZVIZ Inc. or its subsidiaries (hereinafter
referred to be “EZVIZ”). The documents cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or
implied, regarding to the documents.
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos
mentioned in the documents are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS
PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT
WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE
PURCHASE PRICE THE PRODUCT.
EZVIZ does not undertake any liability for personal injury or property damage, as the result of product interruption or service termination cause by: a)
improper installation or usage other than as requested; b) the protection of national or public interests; c) Force Majeure; d) yourself or the third
party, including not limitation, using any third party’s products, software, applications, and among others.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE
ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
Regulatory Information
FCC Information
FCC compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
SAVE THIS MANUAL FOR FUTURE REFERENCE
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it
at designated collection points. For more information see: www.recyclethis.info.
2006/66/EC and its amendment 2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved
for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Safety Instruction
CAUTION: THE PRODUCT IS BUILT IN A REPLACEABLE BATTERY. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the package.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment type [CS-W3-WD1200G, CS-W3-WD1200GR, CS-W3-
WD2600G, CS-W3-WD2600GR is in compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
For more information, please visit www.ezvizlife.com
Need help? Contact us:
Phone:
USA/CAN: +1-855-693-9849
MX: +52-55-8526-1060
Email:
1
Basic Information
Box Contents
Router (x1)
Power Adapter (x1) Quick Start Guide (x1)
The contents are subject to actural products.
Rear Panel Overview
Version A
IPC
ACCESS
Power Input
12V 1A
One Key Access/RESET Button
Hold for 1s: Enable One Key Access.
Hold for 6s: Restore to Default Settings.
WAN Port
For Internet Access
LAN Port
For Computer or Other Device
2
Version B
*Devices connected to the Wi-Fi from the router can share the files in the USB disk or mobile HDD that is inserted to the
USB port of the router.
LED Indicator Status
Steady Green Working properly.
Steady Blue Internet disconnected..
Flashing Blue One Key Access is enabled.
WAN Port
For Internet Access
Power Input
12V 1.5A
LAN Port
For Computer or Other
Device
One Key Acess/RESET Button
Hold for 1s: Enable One Key Access
Hold for 6s: Restore to Default Settings
Power on/off
*USB Port
For USB Disk or Mobile HDD, etc.
3
Wiring
1. Connect the WAN port to the Internet via network cable.
IPC
ACCESS
ADSL Modem/Optical Modem/Optical
Network Unit/Cable Modem
Network Port
OR
2. Connect your router to power outlet via power adaptor and wait for 90 seconds.
Power Outlet
Power Adaptor
IPC
ACCESS
Configuring
You can configure the parameters through the computer or the mobile phone. We take the computer configuration as
an example.
3. Connet the LAN port and the computer via network cable. The computer will get the IP address of the
router automatically.
IPC
ACCESS
4. Open the Internet broswer (Internet Explorer 8.0 and above is recommeded) and input 192.168.7.1 or
wifi.ezvizlife.com. Press Enter to go to the configuring page.
5. Set the parameters such as router password, Wi-Fi name and password, etc.
You can also connect your mobile phone to Wi-Fi from the router, open the broswer in the mobile phone, and follow Step 4
and Step 5.
4
Wi-Fi Connecting
A. EZVIZ Wi-Fi Camera(s)
6. Power on the camera. Wait until camera status light blinks alternating Blue and Red or wait for 2 mins.
7. Press the IPC ACCESS/SYNC button for 1 second to start detecting your camera(s). Once connected,
camera status light will start flashing blue. The router will exit One Key Access after 2 mins.
IPC
ACCESS
B. Other Wi-Fi Device
8. Find the Wi-Fi from the router and connect it by entering the Wi-Fi password that you have set in Step 5.
Adding to EZVIZ Account
9. For first time users, download the EZVIZ App in your Android phone or iPhone. Register an EZVIZ account.
For existing users, open the EZVIZ App and log in.
10. Add the camera by tapping the (+) sign in the HOME screen then scan the QR code on the camera or
type in its serial number.
11. Add the router by tapping the (+) sign in the HOME screen then scan the QR code on the router or type
in its serial number.
12. Once added to the EZVIZ account, tap the router in the EZVIZ App Home screen to verify the camera(s)
linked to it.
5
Appendix
Recommended Router's Position
For the router's best performance, you can place the router as bellow.
• The distance between each antenna should be larger than 6 cm.
• Keep the router away from household appliance as far as possible.
Wi-Fi Guard
Go to Settings > Advanced Settings > Wi-Fi Guard to enable it.
Enable Wi-Fi Guard to ensure your Wi-Fi security. Once enabled, you can only connect devices to Wi-Fi
within 2 mins after pressing the IPC ACCESS/SYNC button.
One Key Access
• For EZVIZ cameras, refer to Step 6 and Step 7.
• For the devices supporting WPS function:
1. Search the Wi-Fi, click or press the WPS button in the device interface or in the device body.
2. Press IPC ACCESS/SYNC button in the router for 1 second to connect Wi-Fi.
6
기본 정보
박스 내용물
라우터(x1)
전원 어댑터(x1) 퀵 스타트 가이드(x1)
내용물은 실제 제품에 따라 변경될 수 있습니다.
후면 패널
버전 A
IPC
ACCESS
전원 입력
12V 1A
원터치 연결/리셋 버튼
1초간 길게 누름: 원터치 연결
을 활성화합니다.
6초간 길게 누름: 기본 설정으
로 복원합니다.
WAN 포트
인터넷 연
결용
LAN 포트
컴퓨터 또는 기타 장치용
Andere Handbücher für W3
3
Inhaltsverzeichnis
Sprachen:
Andere Ezviz Netzwerk-Router Handbücher
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise