F5 i15000 Series Gebrauchsanweisung
Setting Up the i15000 Series Platform
MAN-0661-02
Table of Contents
Platform Overview......................................................................................................................5
About i15000 Series models..............................................................................................5
About the platform..............................................................................................................5
Hardware included with the platform..................................................................................6
Peripheral hardware required.............................................................................................7
Platform Installation...................................................................................................................9
About installing the i15000 Series platform........................................................................9
About the quick-install rails................................................................................................9
Quick-install rail kit hardware..................................................................................9
Install the rail lock brackets...................................................................................10
About installing the i15000-N (NEBS) platform................................................................11
Secure the i15000-N (NEBS) platform to the rack................................................11
About grounding the platform...........................................................................................12
Connect the ground lug to the ground terminal.....................................................13
Connect the cables and other hardware..........................................................................13
Configure a management IP address using the LCD.......................................................15
License the platform.........................................................................................................18
Environmental Guidelines........................................................................................................19
General environmental and installation guidelines...........................................................19
Chassis rack-mount spatial requirements........................................................................20
Guidelines for power supply units (PSUs)........................................................................21
Guidelines for AC-powered equipment............................................................................22
Guidelines for DC-powered equipment............................................................................22
Guidelines for NEBS platforms........................................................................................23
Platform airflow diagram..................................................................................................23
Legal Notices............................................................................................................................25
Legal notices....................................................................................................................25
3
Table of Contents
4
Table of Contents
Platform Overview
About i15000 Series models
The i15000 Series platform is a powerful system that is designed specically for application delivery
performance and scalability.
The i15000 Series platform is available in a Network Equipment-Building System (NEBS) compliant version
(i15000-N). The i15000-N with stock DC power supply units (PSUs) is NEBS compliant. The i15000-N
with AC PSU upgrades (UPGs) is not NEBS compliant. The i15000 with stock AC PSUs is not NEBS
compliant.
For more information, please see the data sheet at www.f5.com/pdf/products/big-ip-platforms-datasheet.pdf.
About the platform
Before you install this platform, review information about the controls and ports located on both the front
and back of the platform.
On the front of the platform, you can use the LCD touchscreen to view information about, manage, and
reset the system. You can also use the front-panel LEDs to assess the condition of the system.
Figure 1: Front view of the i15000 Series platform
Figure 2: Front view of the i15820-DF platform
1. 100/1000/10000 (100Base-T, 1GBase-T, 10GBase-T) capable management port
2. USB 3.0 port
3. Console serial port
4. Serial (hard-wired) failover port
5. 40GbE QSFP+ ports (8)
6. 100GbE QSFP28 ports (4)
7. Indicator LEDs
8. 2.2 inch LCD touchscreen
The back of the i15000 Series platform includes the fan tray, two power supply units (PSUs), the chassis
ground terminals, and the storage drives (located behind the fan tray).
Figure 3: Back view of the i15000 Series AC-powered platform
1. Fan tray (removable)
2. Power input panel 1 (AC power receptacle)
3. Power input panel 2 (AC power receptacle)
4. Chassis ground terminals
Figure 4: Back view of the i15000 Series DC-powered platform
1. Fan tray (removable)
2. Power input panel 1 (DC terminal)
3. Power input panel 2 (DC terminal)
4. Chassis ground terminals
Hardware included with the platform
This platform includes all of the hardware components listed here.
HardwareQuantity
Power cables (black), AC power only, per platform
conguration. Might include multiple power cable
2
types if product is delivered outside of the
US/Canada.
DC PSU connectors, standard DC power only. By
default, this platform includes two DC PSUs and two
PSU connectors.
2
6
Platform Overview
HardwareQuantity
RJ45 to RJ45 failover cable, CAT 5 crossover (blue)1
RJ45 to DB9 console port cable (beige)1
RJ45F to RJ45M rolled adapter (beige)1
Quick-install rail kit1
Rail lock brackets2
M3 x 8mm athead screws, black with patch4
#8-32 pan head screws, steel zinc4
Peripheral hardware required
For each platform, you might need to provide additional peripheral hardware. If you plan to remotely
administer the system, it would be helpful to have a workstation already connected to the same subnet as
the management interface.
DescriptionType of hardware
You must provide networking devices that are
compatible with the network interface ports on the
Network hubs, switches, or connectors to connect to
the platform network interfaces
platform. You can use either 10000-Megabit switches
with a breakout cable or 40/100-Gigabit Ethernet
switches.
You can use any USB-certied CD/DVD mass
storage device or a USB ash drive for installing
upgrades and for system recovery.
Note: External CD/DVD drives must be externally
powered.
External USB CD/DVD drive or USB ash drive
You can remotely manage the platform by connecting
to a serial console terminal server through the console
port.
Important: In the event that network access is
impaired or not yet congured, the serial console
Serial console
might be the only way to access the unit. You should
perform all installations and upgrades using the
serial console, as these procedures require reboots,
in which network connectivity is lost temporarily.
You can use the default platform conguration if
you have a management workstation set up.
Management workstation on the same IP network as
the platform
7
Setting Up the i15000 Series Platform
Platform Installation
About installing the i15000 Series platform
After you have reviewed the hardware requirements and become familiar with the i15000 Series platform,
you can install the unit into a 19-inch rack.
Warning: Due to the weight of the platform, at least two people are required to install this chassis into a
rack. Failing to use two people can result in severe personal injury or equipment damage.
Important: Before you install this platform, review the environmental guidelines to make sure that you are
installing the platform into a compatible rack and in the appropriate environment.
Note: F5 recommends that you keep all original packaging, in case you need to repackage and ship the
platform later.
About the quick-install rails
The quick-install rails are optimized for installation into square hole cabinets, but can be installed in other
cabinet styles, such as round hole cabinets, using the screws provided. The rails are easily converted to
mount to either cabinet style.
Figure 5: Quick-install rails
For information about installing the platform using the quick-install rails, see the instruction guide provided
by the manufacturer, which is included with the rail hardware.
Caution: Be sure that the rotating mount brackets located on the ends of the rails are locked into place on
both sides of the platform when installing the quick-install rails.
After installing the platform, secure the chassis to the rack with the rail lock brackets that are provided.
Quick-install rail kit hardware
When you are installing with the quick-install rail kit, use these components.
HardwareQuantity
Quick-install rails2
#8-32 pan head screws, steel zinc2
#8-32 thumb screws (from rail kit)8
Rail lock brackets2
M3 x 8mm athead screws, black with patch
(threadlock) (for rail lock brackets)
4
Install the rail lock brackets
Be sure that the rails are installed onto the chassis before you install the rail lock brackets.
The rail lock brackets secure the platform to the rack when you are using the quick-install rail kit.
1. Use a #1 Philips screwdriver to attach the rail lock brackets to each side of the unit using two of the
black M3 x 8mm athead screws that are provided with the kit.
Use 5 inch-pounds (0.6 Newton-meters) of torque on these screws.
2. Slide the unit into the rack.
Warning: Due to the weight of the platform, at least two people are required to install this chassis into
a rack. Failing to use two people can result in severe personal injury or equipment damage.
3. Use a #2 Philips screwdriver to secure the rail lock brackets to the rack on each side of the unit using
one of the #8-32 pan head screws that are provided with the kit.
Use 14 to 16 inch-pounds (1.6 to 1.8 Newton-meters) of torque on these screws.
10
Platform Installation
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere F5 Netzwerk-Hardware Handbücher
F5
F5 WANJet 300 Technisches Handbuch
F5
F5 6900 Bedienungsanleitung
F5
F5 ARX-500 Bedienungs- und Wartungshandbuch
F5
F5 i4000 Series Montageanleitung
F5
F5 iSeries Bedienungsanleitung
F5
F5 BIG-IP 1600 Montageanleitung
F5
F5 BIG-IP 11050 Bedienungsanleitung
F5
F5 i5000 Series Montageanleitung
F5
F5 520 Bedienungsanleitung
F5
F5 BIG-IP 3900 Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
