Faaborg Rehab Technic Click & Go Series Bedienungsanleitung

User Manual

Click & Go

1/15

Table of Contents

1. Identification ............................................................................................................................................... 3

1.1

Frame label Click & Go Professional II

........................................................................................................ 3

1.2

Explanation of the data on the frame label......................................................................................... 3

2. General information.................................................................................................................................... 4

2.1

Componentsofyourpushpropulsion

...................................................................................................... 4

2.2

General explanation of your push propulsion..................................................................................... 4

3. Safety regulations........................................................................................................................................ 5

3.1

General safety regulations .................................................................................................................. 5

3.2

Warnings for safe use.......................................................................................................................... 5

4. Specifications............................................................................................................................................... 7

4.1

Specifications of the Click & Go Professional II ................................................................................... 7

5. Components of the Click & Go Professional II............................................................................................. 7

5.1

The push handles................................................................................................................................. 7

5.2

The control .......................................................................................................................................... 8

5.3

The wheels........................................................................................................................................... 8

5.3.1

The front wheels.............................................................................................................................. 8

5.3.2

The driving wheels........................................................................................................................... 9

5.4

The height adjustment ........................................................................................................................ 9

5.5

The battery .......................................................................................................................................... 9

5.6

Attaching and taking off the push propulsion................................................................................... 10

5.6.1

Attaching the push propulsion ...................................................................................................... 10

5.6.2

Taking off the push propulsion...................................................................................................... 10

6. Maintenance.............................................................................................................................................. 11

6.1

The tires............................................................................................................................................. 11

6.1.1

Air tires .......................................................................................................................................... 11

6.1.2

PU tires .......................................................................................................................................... 12

6.2

Cleaning of the push propulsion........................................................................................................ 12

6.3

Batteries ............................................................................................................................................ 12

6.4

Service checklist................................................................................................................................. 12

7. Problem analysis and solutions ................................................................................................................. 13

8. Warranty.................................................................................................................................................... 14

8.1

Warranty application......................................................................................................................... 14

8.2

Warranty conditions.......................................................................................................................... 14

2/15

Click & Go Professional II push propulsion.

Click & Go Professional II or injury to yourself.

Generalintroduction

Before you are going to use your new Click & Go Professional II, you and your attendant

must fully read and understand this user manual. Also, if you have read this user

manual, you agree to the conditions mentioned in this user manual.

At the moment we introduce you a quality product of Faaborg Rehab. We want

to thank you for the confidence in our products. The Click & Go is a real quality

product. The policy of FaaborgRehabis focused on to continuously improving the

quality and reliability of our

products. Therefore, we reserve ourselves the right to,

without further notice; make any changed to this user manual.

It is important you read this user manual very carefully, before you are going to use

your push propulsion. This user manual contains important information about the

safe use and maintenance of your push propulsion. We recommend you to keep this

user manual, because it is also your proof of warranty.

The safety instructions in this user manual are general guidelines which must be

seen as overall guidelines. It is possible you develop your own ways for many

common movements. However, we advise you to consult a

professional for

assistance in developing safe use and effective techniques, regarding to

your daily activities and

your physical capabilities.

Your new push propulsion requires frequent maintenance, much of which you can

do yourself. We advise you to take your push propulsion at least once a year to a

professional for a check. You will find a maintenance schedule later in this user

manual.

Attention!

In this user manual you will find tips and warnings. These are clearly identified by the

symbols and display of the

text, like you can seebelow.

3/15

1. Identification

Your push propulsion is equipped with a unique serial number. You will find this number on

the frame of your push propulsion. Below, you see an example of the frame label, where you

can find the identification number. Furthermore, you will find the explanation of the various

data stored on the frame label on the next page.

1.1

Frame label Click & Go Professional II

1.2

Explanation of the data on the frame label

Production date: The date which your Click & Go was manufactured.

Serial number: Every Click & Go has its own unique serial number. You need this

number when you have any technical questions or you want to order any parts.

Maximum weight: The maximum weight allowed on the Click & Go.

Type number: This number indicates which model of Click & Go you have. You need

this number when you have any technical questions or you want to order any parts.

Model name: The model name of your Click & Go starts with the brand name. The

brand name, followed by the de additional model description forms the model name of the

push propulsion. You need the model name when you have any technical questions or you

want to order any parts of the push propulsion, in this case the Click & Go Professional II.

Description: The intended use of your Click & Go is described here.

Warranty: Here, the warranty period of your Click & Go is reflected. Chapter 8

Warranty describes the warranty

4/15

2. General information

2.1

Components ofyour push propulsion

Excel Click & Go Professional II

Control panel

Push handles

Throttle

Height adjustment of the push handles

Battery

Fixation point for the wheelchair

Drive wheels

Front wheels

Your push propulsion is equipped with a number of components and parts. You should know

these before continue reading this user manual. The design and specifications may change

without further notice.

2.2

General explanation of your push propulsion

The Click & Go Professional II are push propulsions, which support the attendant in propelling

the wheelchair. The push propulsion can only be used by the attendant. When you want to

use the push propulsion, you must push the free wheel pedal down. You can see the free

wheel pedal in the middle on photo 1. When you push the free wheel pedal down, the drive

wheels will make contact with the floor. Now the push propulsion is ready to use to support

the propelling of the person in the wheelchair.

Photo 1

5/15

3. Safety regulations

Faaborg Rehab specifically disclaims responsibility for anybody injuries or property damage,

which may occur during any use, when the recommendations and warnings described in this

user manual are not followed. The Click & Go Professional II is, if the push propulsion is used

correctly, very safe and stable products. However, it is possible if you use push propulsion not

correctly, dangerous situations may occur.

3.1

General safety regulations

Protect your push propulsion by checking it regularly. When a part of your Click & Go

Professional II doesn’t function correctly, a dangerous situation could occur. Therefore, you

must keep your push propulsion in perfect condition, to ensure safety in use. Periodical

inspection, a correct adjustment and in time replacement of broken or worn parts will result

in use for years without any problems. A qualified dealer, who will only use the correct

replacement parts, will take care of your push propulsion and make sure you can use your

push propulsion for years without problems.

3.2

Warnings for safe use

To prevent any damage to your property, the push propulsion or the user of the push

propulsion, you must observe the following warnings. Faaborg Rehab is not responsible for

any damage, provided that the warnings be respected. After reading the warnings, you agree

with the regulations, mentioned in this user manual.

•

Check at the delivery of the push propulsion always if all components of the push

propulsion are present and whether any have been damaged. If components are missing

or are damaged, contact your dealer immediately;

•

Do not use your push propulsion as a single component, but only in combination with a

wheelchair;

•

Do not use your push propulsion in sand, rough areas, wet and smooth surfaces or

surfaces with little grip;

•

Do not lean on the back of the push propulsion. This can result in rolling over the push

propulsion;

•

Do not try to ascend ramps without installing the anti-tippers, never ascend a hill without

anti tippers;

•

Never go slanting on or off a slope;

•

Do not use the push propulsion when it rains, when it snows or when there is snow. In

addition to the fact that the push propulsion has little grip, moisture can result in damage

to the push propulsion;

•

While guiding a person in a wheelchair and you use the push propulsion, always hold the

push propulsion at the handle(s);

6/15

•

Make sure the push propulsion is on an even surface when getting in and out of the

wheelchair;

•

Transporting the push propulsion in all vehicles is at your own risk. Faaborg Rehab

assumes no responsibility for this;

•

Never use your push propulsion when something of the push propulsion or the

wheelchair is broken;

•

Never stand on your push propulsion;

•

Never connect anything to the wheels of the pus propulsion, this may cause damage to

the wheelchair and also effect the balance of the wheelchair and may injure the user;

•

Do not push the push propulsion if you attach the brakes of the wheelchair. This may

cause damage at the push propulsion and may occur a dangerous situation;

•

Sudden change of direction causes the push propulsion unbalanced. You should avoid this

by keeping the same direction when you use the push propulsion;

•

The push propulsion provides support during the propelling of the wheelchair by an

attendant and is suitable for pushing one person on the wheelchair. Do not take anyone

on your lap when you use your wheelchair and your push propulsion;

•

Do not use the push propulsion if you are under the influence of alcohol, drugs or heavy

medications that influence the control the push propulsion;

•

When you make any modifications to your push propulsion which are not described in this

user manual, the warranty will expire completely.

structural changes, is at all

times at the expense of the warranty.

7/15

4. Specifications

Below, you will find the specifications of the Click & Go Professional II.

4.1

Specifications of the Click & Go Professional II

Total length: 46 cm

Total width: 36 cm (including the covers on both sides)

Total height: Lowest level: 91 cm / highest level: 117 cm

Total weight: 22.53 kg

User weight: Max. 135 kg

Available colors: Blue and grey

Suitable for seat width: 40 cm to 60 cm

Speed: Max. 5.5 km/u

Drive wheels: 200 x 50 mm

Battery: 2 x 12V / 12 Ah

Weight battery: 7.2 kg

Radius of action: 15 km

5. Components of the Click & Go Professional II

In this chapter the different components of the Click & Go Professional II is described. On the

push propulsion are a number of components present which are adjustable. If you want to

add or remove any of its components, make any adjustments or replace components, you

should always follow the instructions described in this user manual.

5.1

The push handles

The push handles of your Click & Go Professional II are ergonomically designed. On photo 2

you see the push handle of the Click & Go Professional II. Because the push handles are

ergonomically designed, your attendant has a good grip on the push handles. As a result,

pushing the push propulsion by your attendant is not only more comfortable, but the push

propulsion and the wheelchair can also be pushed safer. The push handles of the push

propulsion is height adjustable (see paragraph 5.4).

Photo 2

8/15

5.2

The control

The control of the Click & Go Professional II the operation of Click & Go Professional II is going

through a control box (photo 3) and a throttle (photo 4). The control panel on the Click & Go

Professional II is standard placed on the push handle of the push propulsion. You can use the

control panel on both the left and the right side of the wheelchair, depending on your own

preference.

With the red button on the left of the control box, you can turn the push propulsion on and

off. With the black button on the right on the control box, you can set the support of the push

propulsion in forward (F) and in reverse (R) motion. If the push propulsion is turned on the

LED lights below the word ‘Status’ turn green. At the top of the control panel is shown how

full the battery of the push propulsion is. Finally, you can at the bottom of the control panel,

adjust the speed of the push propulsion.

5.3

The wheels

On the push propulsion are driving wheels and front wheels attached. These should be

checked regularly for wear. By checking the wheels for wear, prevents the push propulsion

provides less support to propel the person in the wheelchair.

5.3.1

The front wheels

The front wheels (photo 5) of the push propulsion have the function to confirm the push

propulsion properly to the wheelchair. By driving the push propulsion in the right place for

the attachment point on the wheelchair, you can easily fix the push propulsion to the frame

of the wheelchair.

Photo 3

Photo 4

Photo 5

9/15

5.3.2

The driving wheels

The driving wheels of the push propulsion are 200 x 50 mm (photo 6). The driving wheels are

PU wheels and have a good profile. In that way, the push propulsion can provide the right

support on different surfaces.

5.4

The height adjustment

The Click & Go Professional II is height adjustable. On photo 7 the height adjustment of the

Excel Click & Go Professional II is shown.

5.5

The battery

The battery (photo 8) of the push propulsion is detachable. Beneath the handle where the

battery can be grasped, is a button which says ‘Push’. By pushing this button, the battery can

be taken out. It is possible to charge the battery wherever you want. The charging point is on

the battery itself (photo 9). Because the battery is removable, the battery can be recharged

for example in the house. If both the red and the orange and the green LED lights are visible

the battery is fully charged. If the red and the orange LED lights are visible, the battery is

charged half full. When the red LED light is visible the battery need to be charged.

Photo 6

Photo 7

Photo 8

Photo 9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Faaborg Rehab Technic Mobilitätshilfe Handbücher

Faaborg Rehab Technic

Faaborg Rehab Technic 2024 Bedienungsanleitung

Beliebte Mobilitätshilfe Handbücher anderer Marken

Alber

Alber Scalamobil iQ Bedienungsanleitung

Ferno

Ferno CCT-PX Bedienungsanleitung

HEPRO

HEPRO Gripo Bedienungsanleitung

Otto Bock

Otto Bock Pheon 3R62 Bedienungsanleitung

NRS Healthcare

NRS Healthcare M11090 Bedienungsanleitung

Medline

Medline MDS86835DSHEC Installationsanleitung

Guldmann

Guldmann Twin Turner II Bedienungsanleitung

Drive

Drive ROOMBA Bedienungsanleitung

Gate

Gate Balder Bedienungsanleitung

Decon wheel

Decon wheel TNS Notos Bedienungsanleitung

ExoAtlet

ExoAtlet ExoAtlet-II Bedienungsanleitung

Invacare

Invacare Storm Series Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare B3800F Bedienungsanleitung

AMF-BRUNS

AMF-BRUNS PROTEKTOR Bedienungsanleitung

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Bedienungsanleitung

Rhythm Healthcare

Rhythm Healthcare C500U Bedienungsanleitung

Lumex

Lumex RJ4200A Bedienungsanleitung

Rebotec

Rebotec Jumbo Bedienungsanleitung