FAFREES F1 Bedienungsanleitung
Smart EV/Moped
User Manual
(Model: F1)
EN DE FR IT ES
Congratulations
on your purchase!
Please write down your frame number
in the blank space below in case of
future need.
Bitte notieren Sie Ihre Rahmennummer
in das leere Feld unten, falls Sie dies in
Zukunft benötigen.
Veuillez noter votre numéro de cadre
dans l'espace vide ci-dessous en cas
de besoin futur.
Si prega di annotare il numero di telaio
della bicicletta nello spazio vuoto
sottostante per esigenze future.
Escriba el número de cuadro de su
bicicleta en el espacio en blanco a
continuación en caso de que lo
necesite en el futuro.
CONTENTS
English··························1-16
Deutsch························17-32
Français·······················33-48
Italiano·························49-64
Español························65-80
PRECAUTIONS
Battery and charging:
Charge at 0℃～45℃, discharge at -20℃～60℃,
not put the battery in acidic or alkaline liquid, avoid rain, keep away from
fire, heat and high temperature environment. It is strictly forbidden to
connect the positive and negative poles of the battery reversely, and it is
strictly forbidden to damage, insert the battery or short-circuit the battery.
Please use the original special charger when charging, do not exceed 6
hours, and the charging current does not exceed 2A. When not in use for
a long time, please store the battery in a cool and dry place, and charge
the battery for five hours a month. The user must follow the instructions
for use when charging, otherwise the consequences will be borne by the
user. Pay attention to the battery type and applicable voltage that the
charger can charge, and it is strictly forbidden to mix them. When charging,
it should be placed in a ventilated environment, and it is strictly prohibited
to charge in a confined space or in a hot sun or high temperature
environment. When charging, first connect the battery and the charger, and
then the power supply; when the battery is fully charged, first cut off the
power supply, and then unplug the charger connector. When the green light
is on, the power supply should be cut off in time. It is forbidden to connect
the charger to the power supply for a long time without charging. During
the charging process, if the indicator light is abnormal, a peculiar smell
appears, or the charger casing is overheated, stop charging immediately
and repair or replace the charger. During the use and storage of the charger,
pay attention to avoid the entry of foreign objects, especially avoid the
inflow of water or other liquids, so as not to cause a short circuit inside the
charger. Try not to carry the charger with the bicycle. If you really need to
carry it, you should place it in the toolbox after the shock absorption
treatment is done. Do not disassemble or replace the accessories in the
charger by yourself.
keep the battery dry, do
Riding:
Do not use it until you read the instructions carefully and understand
the performance of the product; do not lend it to someone who can't
manipulate the product for riding. Before riding the bicycle, check
whether the brakes are working. Pay attention to the brake tightness.
If the brake is too loose, use an Allen key to tighten it. Pay attention to
increasing the braking distance when riding in rain or snow.
Applicable age: 16 to 65 years old.
EN 01
After riding, please store the bike in a place without sunlight and rain, not in
residential buildings; always check the motor and brake; check the screws and
the places that need to be fastened regularly, and tighten them regularly.
Recommended torque: (unit: kgf.cm) handlebar screw 60-80, handle screw
175-200, seat cushion screw 175-200, wheel screw 320-450;
The front and rear wheels of the vehicle should be located in the center of the
front fork or frame;
Always check the tire for scratches, cracks or excessive wear. The inner tube
and the valve should be perpendicular to the wheel hub. Damaged or
excessively worn tires need to be replaced immediately. Please find a
professional technician to replace your tire. If your tire accidentally punctures
and leaks, please contact a professional technician for repair or replacement.
Disclaimer
Please be sure to wear a safety helmet when riding a bicycle, follow the
traffic rules, and do not drive on motorized lanes and roads with many
pedestrians. Please check the tire pressure before riding, the recommended
tire pressure is 80～120PSI.
Downhill and non-paved roads do not exceed 15KM/h.
When using the motor, please be careful not to hit it vigorously and keep
the rotating shaft lubricated.
Riding beyond the maximum load is not allowed
(the maximum load is 110KG)
After use, the car can not be parked in the building hall, evacuation stairs,
safety exits, and must be parked correctly in accordance with the safety rules.
One-handed riding is prohibited!
:
Maintenance and care:
For the product model, specifications or related information mentioned in this
User Manual, the company reserves the right of modification and final
interpretation; the functions of the specific model mentioned in this User
Manual are only applicable to that specific model;
The product models, specifications, or related information mentioned in the
User Manual may be changed without notice; without prior written permission
of the company, the User Manual may not be copied, modified, reproduced,
transmitted, or published in any form. Please read the Manual carefully before
using the product, and operate in accordance with the Manual, otherwise the
company will not be liable for product damage or personal or property damage
caused by improper use or error.
EN 02
EN 03
Product function illustration
(Model:F1)
1.LED Display
2.Brake Lever
3.Accelerator
4.Headlight
5.Tire
6.Rim
7.Brake Disc
8.Front Fork
9.Chainwheel
10.Pedal
11.Chain
12.Motor
13.Seat Tube Adjustment
Quick Release
14.Seat Tube battery
15.Tail light
16.Tail light power button
17.Saddle
18.Battery charging port
19.Battery discharging port
12
3
4
5
6
7
8
9 1011
12
13
14
15 16
17
18 19
EN 04
1. Charging: Find the charging hole on the back frame of the battery, connect the
charger to charge. When the battery is fully charged and the charger light changes
from red to green, it is fully charged.
2. Power On/Off: Long press the button to turn on/off the display power.
3. Display: After the power is turned on, the display screen will light up and display
information such as power, speed, mileage and so on. Short press the button to
adjust the assist level.
4. Headlight: Short press the button to turn on/off the headlight.
5. Power-assist mode: power-assisted riding, step on the pedal of the bicycle, and
automatically start the power after reaching a certain speed. If you don't need power
assist, you can turn off the meter.
6. Electric mode: press the thumb accelerator, the bike can accelerate forward. The
greater the compression range, the faster the bike will go. To be on the safe side, tap
your thumb on the throttle and accelerate slowly.
Function introduction:
EN 05
Product installation:
1.Cut all the nylon straps to ensure that the front wheel can be smoothly separated
from the frame and when the rear wheel can rotate freely. Turn the bicycle upside
down as shown above to facilitate the installation of the front wheel.
2.Loosen the left and right front axle screws.
3.Put the front wheel on the front fork for installation, pay attention to the disc brake
pad and the disc brake to match in place. Put the front axle into the opening of the
front fork, insert the safety hook into the safety hole outside the fork, and tighten the
right and left screws finally.
EN 06
4.After the front wheel is installed, turn the bicycle back to normal stand. Loosen the
4 screws of the handlebar stem, place the handlebar and adjust the horizontal angle
of the handlebar, and then fix it with the pipe clamp screws.
5.Tighten each fixing screw with a hexagonal key to fix the handlebar stem to ensure
that there is no looseness of the handlebar.
6.Install the front light. Loosen the front light fixing screw on the front fork. Snap the
headlight into the screw from the bottom up. Hold the rear nut with a wrench, turn the
locking screw and washer clockwise with an Allen wrench, and adjust the angle of
the headlight.
EN 07
7.Pull open the quick release handle of
the seat tube clip, insert the battery, and
lock the tube clip.
8.Insert the plug of the power spring wire
into the discharge port slot on the battery.
9.Install the pedals. Pay attention to the
stickers on the pedals. The pedal with "L"
stamp is the left pedal, the stamp with "R"
is the right pedal, and the right pedal is
installed on the side of the sprocket.
Note: The left pedal is tightened to the left,
and the right pedal is tightened to the right.
Inhaltsverzeichnis
Sprachen:
Andere FAFREES Fahrrad Handbücher
FAFREES
FAFREES F7 Bedienungsanleitung
FAFREES
FAFREES F20 Bedienungsanleitung
FAFREES
FAFREES FF91 Bedienungsanleitung
FAFREES
FAFREES F26 CarbonX Bedienungsanleitung
FAFREES
FAFREES F20 Bedienungsanleitung
FAFREES
FAFREES F-100 Bedienungsanleitung
FAFREES
FAFREES FF20 Polar Bedienungsanleitung
FAFREES
FAFREES F26 PRO Bedienungsanleitung
