Fagor 6H-760 N Bedienungsanleitung

INSTALLATION AND USERS MANUAL

Oven

MANUAL DE INSTALACIÓN Y DE UTILIZACION

Horno

MANUAL DE INSTALAÇAO E DO UTILIZADOR

Forno

MANUEL D’INSTALLATION ET D’UTILISATEUR

Four

INSTALLATIONS- UND BEDIENUNGSANLEITUNGEN

Backofen

EINBAU- UND BETRIEBSANLEITUNG

Backofen

NNÁÁVVOODDNNAAIINNSSTTAALLAACCIIAAPPOOUUŽŽIITTÍÍ

TTrroouubbaa

INŠTALAČNÁ A POUŽÍVATEĽSKÁ PRÍRUČKA

Rúra

TELEPÍTÉSI ÉS HASZNÁLATI ÚTMUTATÓ

Sütő

    



Dear Customer,

You have just acquired a FAGOR oven and we would like to thank you.

This new generation of appliances has been designed especially for you to allow your

cooking talents and creativity to flourish for your own pleasure and that of your

friends and family.

Your new FAGOR oven will fit harmoniously into your kitchen and perfectly combine

cooking performance and ease of use.

In the line of FAGOR products, you will also find a wide range of microwaves,

ventilation hoods, dishwashers and refrigerators, all of which can be built in and all of

which can be coordinated with your new FAGOR oven.

Of course, in an ongoing effort to satisfy your demands with regard to our products as

best as possible, our after-sales service department is at your disposal and ready to

respond to all of your questions and suggestions (contact information at the end of

this booklet).

Log on to our website www.fagor.com, where you will find our latest innovations and

further useful information.

FAGOR

We cook so well together

As part of our commitment to constantly improving our products, we reserve the right to make

changes to them based on advances to their technical, functional and/or aesthetic properties.

Attention:

Before installing and using your appliance, please carefully read this Guide to

Installation and Use, which will allow you to quickly familiarise yourself with its

operation.

WWW.FAGOR.COM

TABLE OF CONTENTS

1 / DESCRIPTION OF YOUR APPLIANCE

• Introduction to your oven ____________________________________ 04

• Introduction to the programmer ______________________________ 05

2 / USING YOUR OVEN

• Using the programmer ______________________________________ 06

ºHow to set the time _____________________________________ 06

ºImmediate cooking _____________________________________ 07

• Programmed cooking _______________________________________ 08

• Using the timer function _____________________________________ 10

3 / OVEN COOKING MODES _______________________________________ 11

4 / CARING FOR AND CLEANING YOUR APPLIANCE

• Pyrolytic oven _____________________________________________ 13

• Starting the cleaning cycle ___________________________________ 14

• Ending the cleaning cycle____________________________________ 14

5 / TROUBLESHOOTING __________________________________________ 15

1 / DESCRIPTION OF YOUR APPLIANCE

Temperature selector switch

Programmer

Function selector switch

Lamp

Shelf support indicator

Level detection

Door open sensor

APPLIANCE DESCRIPTION

INTRODUCTION TO YOUR OVEN

•

INTRODUCTION TO THE PROGRAMMER

Time, cooking time and

temperature display

Temperature indicator

Cooking time indicator

Cooking end time indicator

ETimer indicator

Selection buttons

Adjustment buttons

•

1 / DESCRIPTION OF YOUR APPLIANCE EN

2 / USING YOUR OVEN

•How to set the time

-When supplied with electricity

The display flashes at 12:00 (fig.1)

Set the time by pressing the +or —buttons

(holding down the button allows you to scroll

through the numbers rapidly) (fig.2).

Example: 12:30

Press the “ ” button to confirm.

The display stops flashing.

- To set the time on the clock

The function selector switch must be in the 0

position (fig.1).

Press and hold the “ ” button for a few

seconds until the display is flashing (fig.2),

then release. Audible beeps indicate that it is

now possible to set the time.

Adjust the clock setting with the +and —

buttons (fig.3).

Press the “ ” button to validate (fig.4).

fig.2

fig.3

fig.4

fig.1

Warning

If there is no confirmation from the

“ ” button, the time is recorded

automatically after a few seconds.

fig.3

fig.1

USING THE PROGRAMMER

•

2 / USING YOUR OVEN

•Immediate cooking

— The programmer should display only the

time.

It should not be flashing (fig.1).

Turn the function selector to the position of

your choice.

Example: position

(fig.2).

Your oven recommends the ideal

temperature for the chosen cooking mode

(fig.3).

It is, however, possible to adjust the

temperature by pushing the selector buttons

+or —(fig.4)

Example: temperature set to 210°C (fig.5).

Place your dish in the oven based on the

recommendations provided by the cook

book.

After these steps, the oven heats up and the

temperature indicator flashes.

A series of beeps will be emitted when the

oven reaches the selected temperature.

The temperature stops flashing.

fig.2

fig.4

Warning

All types of cooking are done with the door closed.

Warning

After a cooking cycle, the cooling fan continues to operate for a period of time in order

to guarantee optimal oven reliability.

fig.1

fig.3

fig.5

2 / USING YOUR OVEN

fig.2

fig.1

fig.4

Cooking with immediate start and

programmed duration

- Select the desired cooking mode and adjust

the temperature.

Example: position , temperature 200°

(fig. 0).

- Press the “ ” button until the cooking time

indicator flashes “ ”.

The display flashes 0:00 to indicate that you

can now adjust the setting (fig. 1).

- Press the + or —buttons to set the desired

time.

Example: 25 mins cooking time (fig.2).

The cooking time is automatically recorded

after a few seconds.

The cooking time display stops flashing and

returns to temperature mode (fig.3).

The countdown of the cooking time begins

immediately after it has been set.

After these three steps, the oven heats up:

A series of beeps will be emitted when the

oven reaches the selected temperature.

At the end of cooking (end of programmed

time),

- The oven stops,

- 0:00 is displayed (fig.4),

- a series of beeps sounds for a few minutes.

The beeps can be stopped by pressing the

“ ” button.

The display shows the time once again when

the function selector switch is returned to 0

(fig.5). fig.5

fig.3

fig.0

PROGRAMMED COOKING

•

2 / USING YOUR OVEN

Cooking with delayed start and chosen

cooking end time

Proceed as with programmed cooking.

- After setting the cooking time, press on the

“ ” button until the cooking end time

indicator “ ” flashes.

The time display flashes to indicate that you

can now adjust the setting (fig. 1).

- Press the +or —button to set the desired

cooking end time (fig. 2).

Example: end of cooking at 13:00 (fig. 3).

The cooking end time is automatically

recorded after a few seconds.

The cooking end time display stops flashing.

After these 3 steps, the oven heating is

delayed so that cooking ends at 13:00.

At the end of cooking (end of programmed

time),

- The oven stops,

- 0:00 is displayed,

- a series of beeps sounds for a few minutes.

The beeps can be stopped by pressing the

“ ” button.

The display shows the time once again when

the function selector switch is returned to 0

(fig.3).

In the case of programmed cooking cycles,

the cavity lights up until cooking begins, and

remains lit until cooking is finished.

fig.3

fig.1

fig.2

2 / USING YOUR OVEN

-Your oven’s programmer can be used as

an independent timer that allows you to

count down a time without operating the

oven.

In this case, the timer display has priority

over the clock display.

- Press the “ ” (fig.1) button until the timer

symbol begins to flash —> 0.00 flashes.

- Adjust the chosen time by pressing the

+or —selectors.

- Press the “ ” button to confirm or wait a

few seconds (fig. 2).

Warning

It is possible to change or cancel the timer at any time.

fig.1

fig.2

The display stops flashing after a few seconds and the timer starts working, counting down the time

in seconds.

Once the time has expired, the timer emits a series of beeps to notify you.

The beeps can be stopped by pressing the “ ” button.

USING THE TIMER FUNCTION

•

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Fagor Ofen Handbücher

Fagor

Fagor 8H-198ADTCN Bedienungsanleitung

Fagor

Fagor MQC-A10X Bedienungsanleitung

Fagor

Fagor Multifunction Combi Oven Bedienungsanleitung

Fagor

Fagor 5H-721 Series Bedienungsanleitung

Fagor

Fagor C45 Kurzanleitung

Fagor

Fagor HPM-199CX Montage- und Bedienungsanleitung

Fagor

Fagor HALOGEN TABLETOP OVEN Technische Daten

Fagor

Fagor MIDI45 Kurzanleitung

Fagor

Fagor FSO500X Bedienungsanleitung

Fagor

Fagor 5H-730X Bedienungsanleitung

Fagor

Fagor FDO900X Bedienungsanleitung

Fagor

Fagor 5H-741 Series Bedienungsanleitung

Fagor

Fagor 8H-885ADTFTN Bedienungsanleitung

Fagor

Fagor MH-16 Bedienungsanleitung

Fagor

Fagor 6H-800 Bedienungsanleitung

Fagor

Fagor 5HA-196 X - REV 7-10 Installationsanleitung

Fagor

Fagor CONCEPT Betriebsanleitung

Fagor

Fagor 5HA-196 X - REV 7-10 Stücklistenhandbuch

Fagor

Fagor 8H-760TCB Bedienungsanleitung

Fagor

Fagor OVEN Bedienungsanleitung

Fagor

Fagor MH-2600MF Bedienungsanleitung

Fagor

Fagor 7H-750 Series Bedienungsanleitung

Fagor

Fagor 6HV-585A TCX Bedienungsanleitung

Fagor

Fagor 5H-780X Bedienungsanleitung

Beliebte Ofen Handbücher anderer Marken

Bosch

Bosch HVA531NS0 Bedienungsanleitung

Electrolux

Electrolux EOF6P46X Bedienungsanleitung

NEFF

NEFF B44S32 5GB Series Bedienungsanleitung

Combi

Combi BLODGETT BC142GDS Bedienungsanleitung

AEG

AEG COMPETENCE 311704300 Bedienungsanleitung

Falcon

Falcon DOMINATOR PLUS G3106 Series Benutzerhandbuch

Rational

Rational SCC WE 61G Bedienungsanleitung

Smeg

Smeg DOSPA38X Installations- und Betriebshandbuch

Electrolux

Electrolux air-o-convect 20 GN 2/1 Bedienungsanleitung

Miele

Miele HR 1954-2 Bedienungsanleitung

KHIND

KHIND OT50 Bedienungsanleitung

Henny Penny

Henny Penny Smoker Box Bedienungsanleitung

Lang

Lang ECOD-AP Bedienungsanleitung

AEG

AEG BEK455310M Bedienungsanleitung

Frigidaire

Frigidaire FNGE90JGR Bedienungsanleitung

Hotpoint

Hotpoint FE9 S831 JSH IX Bedienungsanleitung

GE Advantium SCB2000 Bedienungsanleitung

AEG

AEG DE401301DM Bedienungsanleitung