F&F BIS-411 1R1Z Bedienungsanleitung

Inhaltsverzeichnis

Andere F&F Relais Handbücher

Beliebte Relais Handbücher anderer Marken

Shelly

Shelly Pro Series Bedienungsanleitung

GE

GE MVAX 11 Bedienungsanleitung

ABB

ABB RELION REF615R Bedienungsanleitung

Pilz

Pilz PNOZ X10 Betriebsanleitung

Kemo Electronic

Kemo Electronic B197 Bedienungsanleitung

Seg

Seg MRM3 Bedienungsanleitung

Basler

Basler BE1-700C Bedienungsanleitung

CD Automation

CD Automation REVEX 2PH 280A Bedienungsanleitung

ABB

ABB SPAJ 142 C Stücklistenhandbuch

Ruelco

Ruelco 1S04 Bedienungsanleitung

Basler

Basler V3E Z1P B2C1F Bedienungsanleitung

Doepke

Doepke Dupline DSM 2 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RT1966-4D Bedienungsanleitung

GE

GE DGP Bedienungsanleitung

Kyongbo Electronics

Kyongbo Electronics GDR-D01 Bedienungsanleitung

Siemens

Siemens SIPROTEC 4 Bedienungsanleitung

Siemens

Siemens BD2-AK03X/FS Series Bedienungsanleitung

Leuze

Leuze MSI-SR5B Bedienungsanleitung

- 1 -

BIS-411 1R1Z 24 V

Bistable relay

Electronic bistable pulse relay BIS-411 1R1Z allows switching on

or off the lighting or other device from several different points

by parallel connected, momentary (bell) control switches.

The receiver is switched on after a current pulse caused by pres-

sing any momentary (bell) button connected to the relay. After

the next pulse, the receiver will be switched off. The relay does

not have a "memory" of the contact position, which means in

the event of a power failure and its subsequent return, the relay

contact will be set to "off". This prevents the controlled receivers

from being switched on automatically without supervision after

a prolonged power failure.

Purpose

Functioning

F&F Filipowski L.P.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: biuro@fif.com.pl

Do not dispose of this device in the trash along with other waste! According to the Law on

Waste, electro coming from households free of charge and can give any amount to up to

that end point of collec� on, as well as to store the occasion of the purchase of new equip-

ment (in accordance with the principle of old-for-new, regardless of brand). Electro thrown

in the trash or abandoned in nature, pose a threat to the environment and human health.

- 2 -

1.Disconnect the power supply.

2.Fix the relay on a rail in the control box.

3.Connect the power wires to terminals 1-3: for AC voltage, any

polarity; for DC voltage: "+" to terminal 3, "–" to terminal 1.

4.Momentary switches connected in parallel, connect to termi-

nal 6 and to the wire to which terminal 3 is connected.

5.Connect the powered receiver in series to terminals 7-9 or

10-12.

Mounting

Wiring diagram

- 3 -

BIS-411 1R1Z can’t work with backlit buttons.

1-3 power supply of the relay 9÷30 V AC/DC

6 control input

7-9 output – NC contact (passive)

10-12 output – NO contact (active)

Different supply voltages for the relay and receiver

Example of connection

- 4 -

The maximum total backlight current of all connected

buttons must not exceed 5 mA.

power supply 9÷30 V AC/DC

contact separated 1×NO, 1×NC

maximum load current (AC-1) 2×8 A

control pulse current 5 mA

activation delay 0,1÷0,2 s

power supply indication green LED

activation indication red LED

power consumption

standby 0.15 W

on 0.6 W

terminal 2.5 mm² screw terminals

tightening torque 0.4 Nm

working temperature -25÷50°C

dimensions 1 module (18 mm)

mounting on TH-35 rail

ingress protection IP20

Technical data

- 5 -

tungsten halogen fluorescent energy-saving LED

1000 W 600 W 500 W 250 W 100 W

The above data are indicative and will heavily depend on the

design of a specific receiver (that is especially important for

LED bulbs, energy-saving lamps, electronic transformers and

pulse power supply units), switching frequency and operating

conditions.

For more information visit: www.fif.com.pl.

The F&F products are covered by a warranty of the 24 months

from the date of purchase. Effective only with proof of purchase.

Contact your dealer or directly with us.

F&F Filipowski L.P. declares that the device is in conformity

with the essential requirements of The Low Voltage Directive

(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)

Directive 2014/30/UE.

The CE Declaration of Conformity, along with the references to

the standards in relation to which conformity is declared, can be

found at www.fif.com.pl on the product page.

Power table

Warranty

CE declaration

E230912