Fanimation HUGH 44 Bedienungsanleitung

Serial Number

Purchase Date

ATTACH YOUR RECEIPT HERE AND REGISTER YOUR FAN AT FANIMATION.COM

READ AND SAVE THESE INSTRUCTIONS

Español p. 19

MODEL #FPS8332B**

MODEL #FPS8355B**

HUGH 52

™

CEILING FAN

HUGH 44

™

CEILING FAN

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-888-567-2055, 8 a.m.-5 p.m., EST, Monday-Friday.

FPS8332B** Net Weight 13.89 lbs (6.30 kg)

FPS8355B** Net Weight 16.53 lbs (7.50 kg)

1. LIMITED LIFETIME MOTOR WARRANTY - If any part of your fan motor fails, due to a defect in materials or workmanship during

the lifetime of the original purchaser, Fanimation will provide the replacement part free of charge, when the defective fan is returned

to our national service center. Proof of purchase is required. Customer shall be responsible for all costs incurred in the removal or

reinstallation and shipping of the product for repairs or replacement.

2. ONE YEAR MOTOR LABOR WARRANTY - If your fan motor fails at any time within one year from the original purchase, due to

defects in materials or workmanship, labor to repair the motor will be provided free of charge at our national service center. Purchaser

will be responsible for labor charges after this one-year period. Customer shall be responsible for all costs incurred in the removal or

reinstallation and shipping of the product for repairs or replacement.

3. If any other part of your fan fails at any time within one year after original purchase, due to a defect in materials or workmanship, we

will repair, or replace, at our option, the defective part free of charge for parts and labor performed at our national service center.

4. Because of varying climate conditions, this warranty does not cover changes in the finish, including rusting, pitting, corroding,

tarnishing, or peeling.

5. This warranty is void and does not apply to damage from improper installation, neglect, accident, misuse, exposure to extremes of

heat or humidity, or as a result of any modification to the original product.

6. All costs of removal and reinstallation of the fan are the sole responsibility of the owner of the fan and not the store that sold the fan

or Fanimation.

7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty.

8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac-

company authorized returns and must be sent freight prepaid to Fanimation. The fan to be returned must be properly packed to avoid

damage in transit; Fanimation will not be responsible for any damage resulting from improper packaging.

9. It is understood that any repair or replacement is the exclusive remedy available from Fanimation. There is no other expressed or

implied warranty. Fanimation hereby disclaims any and all implied warranties, including, but not limited to those of merchantability and

fitness for a particular purpose to the extent permitted by law. Some states do not allow limitations on implied warranties. Fanimation

will not be liable for incidental, consequential, or special damages arising out of or in conjunction with product use or performance,

except as may otherwise be accorded by law. This warranty gives you special legal rights and you may also have other rights that vary

from state to state.

10. A certain amount of wobble is normal and should not be considered a problem or a defect.

LIMITED LIFETIME WARRANTY

Extends to the original purchaser of a Fanimation Fan

Important Safety Instructions

WARNING: To avoid fire, shock and serious personal injury, follow these instructions.

1. Read your owner’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams.

2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power

from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such

as a tag, to the service panel.

3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before

servicing.

4. Do not insert anything into the fan blades while the fan is operating.

5. Do not operate reversing switch until fan blades have come to a complete stop.

Additional Safety Instructions

1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.

2. All wiring and installation procedures must satisfy National Electrical Codes (ANSI/ NFPA 70) and Local Codes. The ceiling fan

must be grounded as a precaution against possible electrical shock. Electrical installation should be made or approved by a licensed

electrician.

3. The fan base must be securely mounted and capable of reliably supporting at least 35 lbs. See page 5 of owner’s manual for

support requirements. Consult a qualified electrician if in doubt.

4. The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with the fan blades.

5. Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do not have adequate electrical

knowledge or experience, have your fan installed by licensed electrician.

WARNING: TO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE INSTALLED WITH AGENERAL USE ISOLATING WALL

CONTROL/SWITCH.

WARNING: This product is designed to use only those parts supplied with this product and/or accessories designated specifically for

use with this product. Using parts and/or accessories not designated for use with this product could result in personal injury or property

damage.

WARNING: To reduce the risk of personal injury, do not bend the blade bracket (flange or blade holder) when installing the brackets,

balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

6. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to

ensure that they do not play with the appliance.

7. For supply connections, if the conductor of a fan is identified as a grounded conductor, then it should be connected to a grounded

conductor power supply. If the conductor of a fan is identified as an ungrounded conductor, then it should be connected to an ungrounded

conductor power supply. If the conductor of a fan is identified for equipment grounding, then it should be connected to an

equipment grounding conductor.

6. This fan is to be used in wet locations.

Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Energy Efficient Use of Ceiling Fans . . . . . . . . . . . . . . . . . . . . .4

Electrical and Structural Requirements . . . . . . . . . . . . . . . . . .4

How to Hang and Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . .

Table of Contents

How to Assemble Your Light Kit . . . . . . . . . . . . . . . . . . . . . . . .

How to Operate Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . .11

How to Assemble Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . .8

How to Assemble Your Ceiling Fan Blades . . . . . . . . . . . . . . . 8

9FPS8355B Exploded-View Illustration . . . . . . . . . . . . . . . . . . .17

FPS8332B Exploded-View Illustration. . . . . . . . . . . . . . . . . . . . .16

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

How to Clean Your Ceiling Fan Blades.. . . . . . . . . . . . . . . . . .13

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

How to Install Your Remote Control. . . . . . . . . . . . . . . . . . . . .13

This manual is designed to make it as easy as possible for you

to assemble, install, operate, and maintain your ceiling fan

Unpacking Instructions

For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all

Wiring outlet box and box connectors must be of type

required by local code. The minimum wire would be a 3-

conductor (2-wire with ground) of the following size:

NOTE: Place the parts from the loose parts bags in a small

container to keep them from being lost. If any parts are missing,

contact your local retailer.

Tools Needed for Assembly Materials

Wire Size A.W.G.Installed Wire Length 14

Up to 50 ft.

50 - 100 ft.

NOTE: If you are uncertain of part description, refer to

exploded view illustration. (Figure 1, page 15& 16)

1. Check to see that you have received the following

parts:

Fan Motor Assembly

(FPS8332B / FPS8355B)

Light Kit/Glass Assembly

Upper LED Plate Assembly

Lower LED Plate Assembly

Plastic Cap Assembly

Light Kit Wire Cover

Blade Set 52Þ

(FPS8355B)

Blade Set 44Þ

(FPS8332B)

Four wire connectors

– Four Wire Connectors

– Blade Plate (FPS8355B only)

– Bag Assembly Safety Cable

– Ten Flat Washer (FPS8332B only)

– Ten #8-32 Serrated head screws

WARNING

Do not install or use fan if any part is damaged or

missing. This product is designed to use only those

parts supplied with this product and/or any accessories

designated specifically for use with this product by

Fanimation. Substitution of parts or accessories not

designated for use with this product by Fanimation could

result in personal injury or property damage. Contact

your retail store for missing or damaged parts.

WARNING

Before assembling your ceiling fan, refer to section on

proper method of wiring your fan (page 7). If you feel you

do not have enough wiring knowledge or experience,

have your fan installed by a licensed electrician.

Hardware bags

(FPS8332B / FPS8355B)

+DQG+HOG5HPRWH

5HFHLYHU8QLW

+DUGZDUHEDJV

(FPS8332B / FPS8355B)

&HLOLQJ%UDFNHW*DVNHW

Ceiling Bracket Assembly

Ceiling Bracket Gasket/

Ceiling Bracket Assembly

)DQ0RWRU$VVHPEO\

(FPS8332B / FPS8355B)

%ODGH6HW

(FPS8332B / FPS8355B)

8SSHU/('3ODWH$VVHPEO\

(FPS8332B / FPS8355B)

/RZHU/('3ODWH$VVHPEO\

/LJKW.LW*ODVV$VVHPEO\

/LJKW.LW:LUH&RYHU

3ODVWLF&DS$VVHPEO\

(FPS8332B / FPS8355B)

– Two #8-32 Junction box screws,

– Two Flat Washer, stainless steel

stainless steel

Hand-Held

Remote

Receiver Unit

Energy Efficient Use of Ceiling Fans

Ceiling fan performance and energy savings rely

heavily on the proper installation and use of the ceiling

fan. Here are a few tips to ensure efficient product

performance.

Choosing the Appropriate Mounting Location

Ceiling fans should be installed, or mounted, in the middle

of the room and at least 7 feet above the floor and 18

inches from the walls. If ceiling height allows, install the fan

8 - 9 feet above the floor for optimal airflow. Consult your

Fanimation Retailer for optional mounting accessories.

Turn Off When Not in the Room

Ceiling fans cool people, not rooms. If the room is

unoccupied, turn off the ceiling fan to save energy.

Using the Ceiling Fan Year Round

Summer Season: Use the ceiling fan in the counter-

clockwise direction. The airflow produced by the ceiling

fan creates a wind-chill effect, making you “feel” cooler.

Select a fan speed that provides a comfortable breeze,

lower speeds consume less energy.

WinterSeason: Reversethe motor andoperatethe ceiling

fan at low speed in the clockwise direction. This produces

a gentle updraft, which forces warm air near the ceiling

down into the occupied space.Remember to adjust your

thermostat when using your ceiling fan - additional energy

and dollar savings could be realized with this simple step!

Electrical and Structural Requirements

Your new ceiling fan will require a grounded electrical

supply line of 120 volts AC, 60 HZ, 15 Amp Circuit.

Electrical code requires use of a fan-rated outlet box to

support the extra weight and motion associated with a

ceiling fan. A fan-rated box will be labeled as such and

typically supports up to a 70lb ceiling fan. Fan-Rated

Outlet Boxes vary in ratings and design. Ensure the

ratings of your ceiling fan outlet box meet the

requirements for the ceiling fan being installed. Figure 1,

Figure 2 and Figure 3 depicts different structural

configurations that may be used for mounting the

outlet box.

Low profile box (Figure 1)

joist or block. It’s used if only one cable is coming into

the box. It is also available in a saddle-mount

configuration.

CEILING

2" x 4"

CEILING JOIST

OUTLET BOX

Figure 1

Figure 2

2" x 4"

CEILING JOIST

CEILING OUTLET BOX

Deep box (Figure 2)

between joists and is roomy enough to handle more

than one cable.

Electrical and Structural Requirements (Continued)

If your fan is to replace an existing light fixture, turn

electricity off at the main fuse box at this time and

remove the existing light fixture.

Turning off wall switch is not sufficient. To avoid

possible electrical shock, be sure electricity is

turned off at the main fuse box before wiring. All

wiring must be in accordance with National and

Local codes and the ceiling fan must be properly

grounded as a precaution against possible electrical

shock.

WARNING

Deep box with brace (Figure 3)

Paired with a deep box, this hanger is meant to span

between two joists and takes the place of wooden

blocking.

To avoid fire or shock, follow all wiring instructions

carefully. Any electrical work not described in these

instructions should be done or approved by a

licensed electrician.

WARNING

Figure 3

CEILING JOIST

CEILING

OUTLET BOX

WARNING

To reduce the risk of fire, electric shock, or personal

injury, mount to outlet box marked acceptable for fan

support of 15.9 kg (35 lbs) or less and use mounting

screws provided with the outlet box. Most outlet boxes

commonly used for the support of luminaires are not

acceptable for fan support and may need to be

replaced, consult a qualified electrician if in doubt.

How to Hang and Wire Your Ceiling Fan

WARNING

It is critical that the outlet box and the screws are

securely anchored to the building structure and capable

of withstanding a load of at least 35 lbs. Failure to verify

that the screws are properly installed could result in the

fan falling. (Figure 2)

Figure 1

WARNING

To avoid possible electrical shock, be sure electricity is

turned off at the main fuse box before hanging.

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

WARNING

The fan must be hung with at least 7´ of clearance from

floor to blades. (Figure 1)

Floor

Ceiling

less than

7 ft

1. Using the /

“ x 2” lag bolt and flat washer, attach

safety cable to ceiling joist or wood structural member.

The lag bolt will pass through the flat washer, safety

cable loop, and into the building structure (Figure 2). You

will first drill a ¼

“ pilot hole into the building structure to

prevent splitting or cracking.

2. The ceiling support cable need to through the center

hole of ceiling bracket when mounting. Using the two

#8-32 screws and washers securely attach the ceiling

bracket gasket and ceiling bracket to ceiling junction box

as shown. (Figure 2)

4. Hang the Motor Assembly as shown. (Figure 4)

Figure 4

Ceiling Bracket

Assembly

Motor

Assembly

NOTE: Supply wires

omitted for clarity

Ceiling Bracket Gasket

Ceiling

Bracket

Gasket

Figure 2

Wood Member

(2 “x 4” Approx.) Ceiling Joist

Ceiling

Junction

Box Screw(2)

Junction Box

Ceiling

Support

Cable Ceiling Bracket

Figure 3

Motor

Assembly

NOTE: Supply wires

omitted for clarity

3. Remove the two screws from the motor assembly,

retain the screws for later and loosen the remaining

screws. (Figure 3)

How to Hang and Wire Your Ceiling Fan (continued)

x 6WIRE

CONNECTORS

HARDWARE USED:

9. After splicing and making the wire connections, the

wires should be spread apart and turned upward with

the grounded conductor (white), the equipment

-grounding conductor (green) and safety cable on one

side of the ceiling bracket and the ungrounded conductor

(black and blue) on the other side of the ceiling bracket.

(Figure 7)

8. Connect wires using connectors as shown in

Figure 7.

Figure 6

Figure 5

fan wires omitted for clarity

NOTE: Supply wires and

5. Attach the safety cable to ceiling support cable.

Slide cable clamp onto safety cable (from fan). Place

the end of cable through the loop of ceiling support

cable. Pull as much cable through loop as possible.

Feed end of cable into clamp hole and firmly tighten

screw (Figure 5). Cut off excess safety cable.

6. Make sure the electrical supply wires, including the

ceiling bracket grounding wire and safety cable are

pulled through the downrod, between the ceiling

bracket and the junction box so that electrical

connections can be made later.

NOTE: The remote unit has 32 different code

combinations. To prevent possible interference from

or to other remote units, simply change the

combination code in the remote and receiver.

NOTE: Factory setting is all up. Do not use this

position.

7. To set the code on receiver unit, slide dip switches

to the same positions as set on the remote. If complete

the receiver code setting process, put the rubber cover

(included) in the receiver unit. (Figure 6)

Receiver Unit

Rubber Cover

Dip Switch

ON DIP

1 2 3 4 5

Figure 7

White Wire

from Supply

Green Wire

from Ceiling Bracket

Black Wire

from Receiver

White wire

from Receiver

BLK_ANT

Black Wire

from Supply

Blue Wire

from Motor

Black Wire

from Motor

Black Wire

from Receiver

White Wire

from Receiver

Blue Wire

from Receiver

White wire

from Motor

Green Wire

from Supply

Green wire

from Motor

How to Assemble Your Ceiling Fan

1. Assemble the motor assembly to ceiling bracket

using the previously removed screws and securely

tighten all screws. (Figure 1)

2. Push the canopy trim ring up to conceal the screws,

such that the mounting tabs seat into the dimpled

grooves in the ceiling bracket midway between the

screws. (Figure 2)

Ceiling Bracket

Assembly

Figure 2

Dimpled

Groove

Canopy Trim

Ring

Mounting

Tabs(4)

Ceiling Bracket

Assembly

Motor

Assembly

Figure 1

How to Assemble Your Ceiling Fan Blades

Do not connect fan blades until the fan is completely

installed. Installing the fan with blades assembled

may result in damage to the fan blades.

CAUTION

NOTE: Periodically check blade hardware and

resecure if necessary. FPS8355B HARDWARE USED:

#8-32

Serrated Head Screws

(3 each per blade)

Blade

Motor

x 9

#8-32

Serrated Head

Screw

x 3

BLADE PLATE

Blade Plate

Slide blades through slots in motor housing and attach

to the motor hub using the #8-32 serrated head screws

and blade plate. Make sure the screws securing the

blades to the motor hub are tight and are properly

seated. (Figure 1B)

1B. For FPS8355B

1A. For FPS8332B

Slide blades through slots in motor housing and attach

to the motor hub using the #8-32 serrated head screws

and flat washers. Make sure the screws securing

the blades to the motor hub are tight and are properly

seated. (Figure 1A)

#8-32

Serrated Head Screws

and Flat Washer

(3 each per blade) Blade

Motor

Figure 1A

x 9

FLAT WASHER

FPS8332B HARDWARE USED:

x 9

#8-32

Serrated Head

Screw

Figure 1B

Motor

Assembly

Upper LED Plate Assembly

Figure 4

Figure 5

Figure 3

Figure 1

Light Kit

Assembly

4. Securely attach the 9-pin switch cup connector to

the wiring harness socket within the upper LED plate

assembly. (Figure 4)

5. Assemble the upper LED plate assembly to the light

kit assembly using the two key slots in the upper LED

plate assembly. Replace the third screw and securely

tighten all three screws. (Figure 5)

Motor

Light Kit

Assembly

How to Assemble Your Light Kit

1. Remove one of the three screws in the support

bracket at the bottom of the motor assembly and

retain the screw for later. Slightly loosen the

remaining two screws. (Figure 1)

3. Remove one of the three screws in the light kit

assembly and retain the screw for Step 5. Slightly

loosen the remaining two screws. (Figure 3)

2. Assemble the light kit assembly to the support

bracket using the two key slots in the light kit assembly.

Replace the third screw and securely tighten all three

screws. (Figure 2) Motor

Light Kit Assembly

Figure 2

How to Assemble Your Light Kit (continued)

Plastic Cap

Assembly

6. Remove the three screws in the upper LED plate

assembly and retain the screws for later. (Figure 6)

8B . (Option B--for use with plastic cap)

If you want to install the plastic cap and not the light kit.

Assemble the plastic cap to the light kit assembly by

twisting in a clockwise direction. (Figure 8B)

NOTE:

If you have installed your fan with the plastic cap,

skip steps 9 and 10.

10. Secure the glass to light kit assembly by twisting

in a clockwise direction. Do not over-tighten. (Figure 10)

8A. (Option A--for use with light kit)

Connect the 2 single-pin connectors from the upper LED

plate assembly to the 2 single-pin connectors from lower

LED plate assembly. (Figure 8A)

To reduce the risk of electric shock, disconnect the

electrical supply circult to the fan before installing

light kit.

CAUTION

9. Assemble the lower LED plate assembly to the upper

LED plate assembly using the preousily removed screws

and securely tighten all three screws. (Figure 9)

The light source is designed for this specific

application and can overheat if serviced by untrained

personnel. If any servicing is required, the product

should be returned to an authorized service facility

for examination or repair.

CAUTION

Light Kit

Assembly

Glass

Upper LED

Plate Assembly

Lower LED Plate

Assembly

Figure 9

Figure 10

Upper LED Plate

Assembly

Upper LED

Plate Assembly

Lower LED Plate

Assembly

7. If you want to install the light kit, skip the step

Assemble the light kit wire cover to the upper LED plate

assembly using the preousily removed screws and

securely tighten all three screws. (Figure 7)

Upper LED Plate

Assembly

Figure 6

Figure 7

Figure 8A Figure 8B

Light Kit Wire Cover

Light Kit Assembly

Andere Handbücher für HUGH 44

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Fanimation Lüfter Handbücher

Fanimation

Fanimation FP8014**-220 Bedienungsanleitung

Fanimation

Fanimation The Inlet FPS7880 Series Bedienungsanleitung

Fanimation

Fanimation Zonix FP4620 Series Bedienungsanleitung

Fanimation

Fanimation Huxley FP5620 Series Bedienungsanleitung

Fanimation

Fanimation AIREHUG LP7668LBL Bedienungsanleitung

Fanimation

Fanimation BLITZ LP8377LBL Bedienungsanleitung

Fanimation

Fanimation Brewmaster FP10 Series Bedienungsanleitung

Fanimation

Fanimation ZONIX WET FP4640B Series Bedienungsanleitung

Fanimation

Fanimation LEVON CUSTOM MAD7912BBL Bedienungsanleitung

Fanimation

Fanimation BENITO v2 FP8003B Series Bedienungsanleitung

Fanimation

Fanimation ARCHIVE LP3071 Series Bedienungsanleitung

Fanimation

Fanimation FP8050 The Quattro Bedienungsanleitung

Fanimation

Fanimation Cancun FP8012 220 Series Bedienungsanleitung

Fanimation

Fanimation Edgewood TF900 Series Bedienungsanleitung

Fanimation

Fanimation STAFFORD FP8274 Series Bedienungsanleitung

Fanimation

Fanimation SHOWROOM CELANO FP8062B Series Bedienungsanleitung

Fanimation

Fanimation Windpointe FP7300 Bedienungsanleitung

Fanimation

Fanimation Palisade FP240RS Bedienungsanleitung

Fanimation

Fanimation SHOWROOM GLEAM FP8404 Series Bedienungsanleitung

Fanimation

Fanimation Vetricco FP3120 Series Bedienungsanleitung

Fanimation

Fanimation FPD8159 Series Bedienungsanleitung

Fanimation

Fanimation The Ventana FP8032SB Bedienungsanleitung

Fanimation

Fanimation BERLIN LP8064 Series Bedienungsanleitung

Fanimation

Fanimation Vetricco FP3120 Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung