Fanimation Punkah FP720 Series Bedienungsanleitung

2008/05

10983 Bennett Parkway

Zionsville, IN 46077

Toll Free (888) 567-2055

FAX (866) 482-5215

Outside U.S. call (317) 733-4113

Visit Our Website www.fanimation.com

The Punkah®Wall Mount Assembly

Wall Assembly Speciﬁcations

A Support Spacing 12˝to 4´ *

B Fan Base Width 4½˝

C Blade Projection 21˝with 18˝Blades@30°

24˝with 22˝Blades@30°

D Blade Projection 9½˝with 18˝Blades

11¾˝with 22˝Blades

EBlade Angle

(10° increments)

Wide Oval Blade, 30° max

Narrow Blade, 45° max

F Motor Assembly Unit 13¾˝L x 7¼˝W

Weights (Approximate)

Fan Assembly Unit 5 lbs

Motor Assembly Unit 17½ lbs

NOTES: Installation is NOT recommended for

sound sensitive areas.

*For spacing of 12˝to 27½˝cutting

push rods is required.

Not designed for signiﬁcant air movement.

Not recommended for Damp Location.

Dimensions shown in inches

SPECIFICATION SHEET

Product Speciﬁcations subject to change

The Punkah®

FP720 - Ceiling/Wall Unit / FP780 - Motor

Weights (Approximate)

Fan Assembly Unit 5 lbs

Motor Assembly Unit 17½ lbs

**Available Finishes

AB Antique Brass

PW Pewter

RS Rust

Ordering Information (Items Priced and Sold Separately)

Item Catalog No. Description

Fan Assembly Unit FP720** Use in ceiling or wall application

One push rod included (with each fan unit)

One Motor Unit FP780**

120V, 60 Hz, ½ horsepower, 0.90 amp, 19 rpm,

single-speed; ON/OFF Switch (user supplied) only.

2 ft power cord (or can be hard-wired directly)

Maximum 6 Fan Assembly Units per Motor.

Blade Sets

(Order Separately)

See catalog for other blade options

NOTE: 18˝blades are recommended for most

installations

220V Model (Export version)

Motor Assembly - 220 volt, 50 Hz

Ceiling / Wall Mount

Oscillating RPM: 19 (single-speed)

Available in 3 standard ﬁnishes

NOTES: Installation is NOT recommended for sound

sensitive areas.

*For spacing of 12˝to 27½˝cutting

push rods is required.

Not designed for signiﬁcant air movement.

Not recommended for Damp Location.

Dimensions shown in inches

**Insert Finish Codes

The Punkah®Ceiling Mount Assembly

Ceiling Assembly Speciﬁcations

A Overall Length 4´ to 24´

B Support Spacing 12˝to 4´

C Fan Base Unit 4½˝L x 4½˝W

D Overall Drop 23˝with 18˝Blades

27˝with 22˝Blades

E Blade Sweep 21˝with 18˝Blades

25½˝with 22˝Blades

F Motor Assembly Unit 13¾˝L x 7¼˝W

NOTE: Motor may also

be wall mounted

or mounted between

fan assemblies

INSTALLATION REQUIREMENTS

It is recommended that each fan and the motor have ¾˝plywood backing (12˝x12˝min.)

snug behind the sheet rock for adequate support. This may also be done with continuous

backing running the length of the fan system thus allowing the most ﬂexibility in placing

the blades.

ELECTRICAL REQUIREMENTS

A 120 VAC electrical feed is required and should be accessible to the

center of the motor. This circuit should be wired to an on/off switch

(Motor is single speed). The motor assembly is supplied with a 2 ft.

cord with plug. Motor assembly may be wired directly to electrical

outlet box. The Fan Blades oscillates at approximately 18-20 rpm.

Andere Handbücher für Punkah FP720 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fanimation Lüfter Handbücher

Fanimation

Fanimation BREWMASTER FP1280-220 Bedienungsanleitung

Fanimation

Fanimation Windpointe FP7400 Bedienungsanleitung

Fanimation

Fanimation Fitzgerald OF6320 Series Bedienungsanleitung

Fanimation

Fanimation FP8050 The Quattro Bedienungsanleitung

Fanimation

Fanimation ZONIX WET FP4640B Series Bedienungsanleitung

Fanimation

Fanimation Tropicana FP1620 Bedienungsanleitung

Fanimation

Fanimation Escalade FP2320 Series Bedienungsanleitung

Fanimation

Fanimation Michael David's Adventure LB1820BL Bedienungsanleitung

Fanimation

Fanimation TORCH FP8458 Series Bedienungsanleitung

Fanimation

Fanimation MA7966 Bedienungsanleitung

Fanimation

Fanimation Enigma FP2120MG Bedienungsanleitung

Fanimation

Fanimation FP4650 Series Bedienungsanleitung

Fanimation

Fanimation Zonix FP4620 Series Bedienungsanleitung

Fanimation

Fanimation PC/DC FPD7619 Series Bedienungsanleitung

Fanimation

Fanimation Centaurus FP4220SN Bedienungsanleitung

Fanimation

Fanimation The Benito FP8003 Bedienungsanleitung

Fanimation

Fanimation SHOWROOM GLEAM FP8404 Series Bedienungsanleitung

Fanimation

Fanimation The Celano FP5420PW Bedienungsanleitung

Fanimation

Fanimation Windpointe MW75 Series Bedienungsanleitung

Fanimation

Fanimation FPD8159 Series Bedienungsanleitung

Fanimation

Fanimation AP091002WH Bedienungsanleitung

Fanimation

Fanimation Enigma FP2120 Series Bedienungsanleitung

Fanimation

Fanimation Edgewood TF100 Series Bedienungsanleitung

Fanimation

Fanimation FPD8088 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung