Fanimation Windpointe FP7300 Bedienungsanleitung
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
SPECIFICATION SHEET
Product Specifications subject to change
FP7300 / FP7400 / FP7500
UNI-PACK SERIES FANS
Copyright 2008 Fanimation, Inc. 2008/05
The Windpointe®
5 – Blade Traditional
Style Model
FP7500**
FP7500 Series – Traditional, 5 Blades
Available Uni-Packed Finishes
Fan Motor Assembly
(188 x 25)
Blades - Palm/Bamboo
(18° Pitch)
Blade
Sweep
Ceiling to Blade
Bottom Edge
Ceiling to
Switch Cup
RPM’s
(H / M / L)
FP7500AB – Antique Brass ISP4 – 22˝Narrow Oval Palm 52˝
14˝14½˝
90 / 65 / 40
FP7500MW – Matte White ISP5 – 18˝Narrow Oval Palm 44˝
14˝14½˝
120 / 95 / 50
FP7500RS – Rust (Damp)
ISD4A – 22˝Narrow Oval Bamboo
52˝
14˝14½˝
95 / 70 / 40
220V Models
FP7500AB-220 – Antique Brass ISP4 – 22˝Narrow Oval Palm 52˝
14˝14½˝
90 / 65 / 40
FP7500RS-220 – Rust (Damp)
ISD4A – 22˝Narrow Oval Bamboo
52˝
14˝14½˝
90 / 70 / 40
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz export
version available.
FAN SPEEDS:
Pull-chain, 3 fan speeds with reversing switch (on switch cup housing). Speeds will vary depending on blade size and
type.
CONTROL OPTIONS:
Optional remote and wall controls are available. See Catalog or visit our website, www.fanimation.com for more control
options.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available, including a single bowl fixture with a maximum of 180 watts and a
variety of four-light fixtures with a maximum of 240 watts. See Catalog or visit our web site, www.fanimation.com for more
lighting options.
DOWNROD OPTIONS:
The fan comes with a 1˝Dia. x 6˝(DR1-6) downrod. Optional downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝, and
72˝. The fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer
than the standard 6˝downrod. Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°. Call tech support
for more information.
BLADE SETS:
A set of 5 Palm or Bamboo blades are included.
DAMP LOCATION:
Rust finish model with bamboo blades is rated for Damp Location.
FP7300** FP7400**
4 – Blade Style Model3 – Blade Style Model
FP7300 Series – 3 Blades
Available Uni-Packed Finishes
Fan Motor Assembly
(188 x 25) Blades (14° Pitch) Blade
Sweep
Ceiling to Blade
Bottom Edge
Ceiling to
Switch Cup
RPM’s
(H / M / L)
FP7300PW – Pewter B2000CP – Wood 60˝
13½˝14½˝
125 / 95 / 60
FP7300RS – Rust (Damp) B3000BW – Wide Oval, Woven 56˝
15˝14½˝
120 / 95 / 50
220V Model
FP7300RS-220 – Rust (Damp) B3000BW – Wide Oval, Woven 56˝
15˝14½˝
120 / 85 / 50
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz export
version available.
FAN SPEEDS:
Pull-chain, 3 fan speeds with reversing switch (on switch cup housing). Speeds will vary depending on blade size and
type.
CONTROL OPTIONS:
Optional remote and wall controls are available. See Catalog or visit our website, www.fanimation.com for more control
options.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available, including a single bowl fixture with a maximum of 180 watts and a
variety of four-light fixtures with a maximum of 240 watts. See Catalog or visit our web site, www.fanimation.com for more
lighting options.
DOWNROD OPTIONS:
The fan comes with a 1˝Dia. x 6˝(DR1-6) downrod. Optional downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝, and
72˝. The fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer
than the standard 6˝downrod. Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°. Call tech support
for more information.
BLADE SETS:
A set of 4 wood blades are included. Not recommended for Damp Location.
DAMP LOCATION:
Fan not rated for Damp Location usage.
FP7400 Series – Wood, 4 Blades
Available Uni-Packed Finishes
Fan Motor Assembly
(188 x 25) Blades - Wood (14° Pitch) Blade
Sweep
Ceiling to Blade
Bottom Edge
Ceiling to
Switch Cup
RPM’s
(H / M / L)
FP7400AB – Antique Brass B4010CP – Cairo Purple Wood 52˝
14˝14½˝
175 / 120 / 70
FP7400RS – Rust B4020SS – Sambel Sand Wood 52˝
14˝14½˝
160 / 110 / 65
220V Model
FP7400RS-220 – Rust B4020SS – Sambel Sand Wood 52˝
14˝14½˝
160 / 110 / 65
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz export
version available.
FAN SPEEDS:
Pull-chain, 3 fan speeds with reversing switch (on switch cup housing). Speeds will vary depending on blade size and
type.
CONTROL OPTIONS:
Optional remote and wall controls are available. See Catalog or visit our website, www.fanimation.com for more control
options.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available, including a single bowl fixture with a maximum of 180 watts and a
variety of four-light fixtures with a maximum of 240 watts. See Catalog or visit our web site, www.fanimation.com for more
lighting options.
DOWNROD OPTIONS:
The fan comes with a 1˝Dia. x 6˝(DR1-6) downrod. Optional downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝, and
72˝. The fan can be mounted on a sloped ceiling up to 30°. Most sloped ceiling installations require a downrod longer
than the standard 6˝downrod. Optional sloped ceiling ball kits (SCB1-52) are available for up to 52°. Call tech support
for more information.
BLADE SETS:
A set of 3 blades are included.
DAMP LOCATION:
Rust finish model with woven blades is rated for Damp Location.
Andere Handbücher für Windpointe FP7300
1
Dieses Handbuch passt für folgende Modelle
2
Andere Fanimation Lüfter Handbücher
Fanimation
Fanimation SHOWROOM CELANO FP8062B Series Bedienungsanleitung
Fanimation
Fanimation Benito FP8003 220 Series Bedienungsanleitung
Fanimation
Fanimation Kubix FP4420 Series Bedienungsanleitung
Fanimation
Fanimation FP6729 series Bedienungsanleitung
Fanimation
Fanimation AIREDROP LP7653 Series Bedienungsanleitung
Fanimation
Fanimation Volare FP4210 Series Bedienungsanleitung
Fanimation
Fanimation studio AIRE DUO LP8066 Series Bedienungsanleitung
Fanimation
Fanimation PC/DC FPD7619 Series Bedienungsanleitung
Fanimation
Fanimation Fitzgerald OF6320 Series Bedienungsanleitung
Fanimation
Fanimation The Beckwith FP7964 Series Bedienungsanleitung
Fanimation
Fanimation Louvre FP1320 Series Bedienungsanleitung
Fanimation
Fanimation HUGH 44 Bedienungsanleitung
Fanimation
Fanimation CCK8002 Bedienungsanleitung
Fanimation
Fanimation Belleria FP4320 Series Bedienungsanleitung
Fanimation
Fanimation VINTERE LP8350LAZ Bedienungsanleitung
Fanimation
Fanimation Vetricco FP3120 Series Bedienungsanleitung
Fanimation
Fanimation Old Havana Series Bedienungsanleitung
Fanimation
Fanimation HUGH FPS8332B Series Bedienungsanleitung
Fanimation
Fanimation Cancun FP8009OB-220 Bedienungsanleitung
Fanimation
Fanimation The Camhaven FP8095 Series Bedienungsanleitung
