Fanvil PA2S Installations- und Benutzerhandbuch

Version: 1.0

Release Date: 15th,Nov,2021

How to change network mode

of PA2S & PA3?

Catalog

How to change network mode of PA2S & PA3? ..........................................................................1

1. Introduction...........................................................................................................................3

1.1. Overview ......................................................................................................................3

1.2. Applicable Model.........................................................................................................3

1.3. Before You Start...........................................................................................................3

1.4. Connection Diagram.....................................................................................................3

2. How to change network mode for PA2S/PA3.....................................................................5

2.1. Change network mode via "volume up" button............................................................5

2.2. Change network mode via DSS key.............................................................................5

2.3. Change network mode via webpage.............................................................................5

Fanvil Technology Co. Ltd

Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China

Tel: +86-755-2640-2199 Email: [email protected] [email protected] Official Web:www.fanvil.com

1. Introduction

1.1. Overview

Both PA2S and PA3 support static IP and DHCP on network mode. This document introduces how

to change network mode between Static IP and DHCP for PA2S & PA3.

1.2. Applicable Model

Fanvil PA2S and PA3

1.3. Before You Start

Step1.

Prepare PoE switch, network cable, PA2S/PA3, computer, speaker, button.

Step2.

Refer to the connection diagram, connect PA2S/PA3 to the switch, and connect the speaker and

button to PA2S/PA3.

Step3.

Connect the computer to the same switch as PA2S/PA3 with Network cable.

1.4. Connection Diagram

Fanvil Technology Co. Ltd

Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China

Tel: +86-755-2640-2199 Email: [email protected] [email protected] Official Web:www.fanvil.com

Fanvil Technology Co. Ltd

Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China

Tel: +86-755-2640-2199 Email: [email protected] [email protected] Official Web:www.fanvil.com

2. How to change network mode for PA2S/PA3

There are three ways to change network mode for PA2S/PA3, via "volume up" button, via DSS key

and via web page management system. Please check the following steps for detail. The default

network mode for PA2S/PA3 is DHCP. If the network mode of PA2S/PA3 is Static IP, you can change

it to DHCP. If the network mode of PA2S/PA3 is DHCP, the network mode won’t change, the device

will just broadcast its IP address.

2.1. Change network mode via "volume up" button

Step1.

Refer to the above connection diagram, connect speaker to PA2S/PA3 and connect PA2S/PA3 to

PoE switch.

Step2.

After PA2S/PA3 finishes booting and gets into standby mode:

Long press its "volume up" button for 10 seconds, the beep sound will ring out and last for 5

seconds. Press the "Volume up" button three times continuously during the 5 seconds to change

the network mode. The device will broadcast its IP address later.

2.2. Change network mode via DSS key

Step1.

Refer to the above connection diagram, connect speaker and button to PA2S/PA3, connect

PA2S/PA3 to PoE switch. The button will work as DSS key.

Step2.

After PA2S/PA3 finishes booting and gets into standby mode:

Long press its DSS key for 10 seconds, the beep sound will ring out and last for 5 seconds. Press the

DSS key three times continuously during the 5 seconds to change the network mode. The device

broadcast its IP address later.

2.3. Change network mode via webpage

Step1.

Load the web page management system of PA2S/PA3.

Step2.

Go to web page “Network”-> “Basic”, set the network mode as you need, and then click “Apply”

button to save your changes.

Fanvil Technology Co. Ltd

Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China

Tel: +86-755-2640-2199 Email: [email protected] [email protected] Official Web:www.fanvil.com

Andere Handbücher für PA2S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fanvil Tor Handbücher

Fanvil

Fanvil A1 Bedienungsanleitung

Fanvil

Fanvil A2 Betriebshandbuch

Fanvil

Fanvil LINKVIL W712 Bedienungsanleitung

Fanvil

Fanvil PA2S Bedienungsanleitung

Fanvil

Fanvil PA2 Bedienungsanleitung

Fanvil

Fanvil PA2S Installations- und Benutzerhandbuch

Fanvil

Fanvil A1 Bedienungsanleitung

Fanvil

Fanvil PA2S Bedienungsanleitung

Fanvil

Fanvil ATA Bedienungsanleitung

Fanvil

Fanvil PA3 Bedienungsanleitung

Fanvil

Fanvil G100S Bedienungsanleitung

Fanvil

Fanvil G200S Bedienungsanleitung

Fanvil

Fanvil GA10 Bedienungsanleitung

Fanvil

Fanvil PA3 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung