Fanvil PA3 Bedienungsanleitung

Quick installation Guide

PA3

1) Port Definition

⑥

①

② ⑧

⑩

③

⑬

④

⑫

⑤ ⑦

⑪

⑨

1Line in port: audio signal input, used to connect external audio input.

2Speaker port: according to the device input voltage adaptive output maximum power.

4Ωspkaker, POE/10W, 12V/10W, 18V/20W, 24V/30W.

The greater the horn impedance, the smaller the output power.

Suggested wire diameter: 18AWG or larger diameter.

3Line out port: audio signal output, for external headset or active speakers.

4Microphone port: the proposed use of electret condenser microphone, sensitivity: -38dB, bias voltage 2.2V.

Microphone signal cable it is recommended to use a shielded cable and connect the shield cable to the

grounding screw, improve anti-interference.

5Volume decrease key: adjust ring volume / call volume / broadcast volume. Long press the volume down

key to broadcast the IP address by voice.

6Volume increase key: adjust ring volume / call volume / broadcast volume.

7Network / Registration LED: indicates network status, call status, registration status.

Fast flashing: network anomaly or SIP account exception.

Slow flashing: during a call.

Always bright: successful registration.

8Ethernet port: WAN port, standard RJ45 port, 10 / 100M adaptive, support PoE input. It is recommended to

use five or super five network cable.

9Power input port: 12V ~ 24V 2A input, according to the input voltage to determine the maximum output

power amplifier.

10 USB port: connect the USB peripherals, such as USB flash disk, USB adapter, etc。

11 Function button port: connection the function button, you can make an emergency call through this button.

12 Reset key: press and hold for 3S, and the indicator light will turn off, and the device will restart and restore

the factory settings.

13 TF card port: connection the TF card, used to store local audio files or records.

Quick installation Guide

PA3

1. Installation

The first step: the device with metal strips (user-owned) fixed in the installation location.

The second step: connect the function key, speaker, microphone and other peripheral devices to the

corresponding port.

The third step: plug the network cable and power, the device light flashes on behalf of the power

2. Searching device

Method 1:

Download address: http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe

Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and find the

IP address.

Method 2:

Connect the speaker, by pressing the volume down key for 3 seconds

(after 30 seconds after power on),the device automatically voice broadcast the machine’s IP address.

Method 3:

Long press the volume up key for 3 seconds, the speaker issued a rapid beep, and then quickly press the

Volume up key three times, beep stopped. Wait 10 seconds, successfully switch to dynamic IP after the

system automatically voice broadcast IP address. Switching again will become a fixed IP address.

Default Setting

Default DHCP

Client

Enabled by default Static IP address 192.168.1.128

Voice broadcast IP

address

Hold the volume down

key for 3 seconds Default Web port 80

Quick installation Guide

PA3

connection is normal.

3. Fast settings

Step 1: Log in to the device page

Use the web browser input IP (for example: http://192.168.1.128) access.

The default user and password are admin.

Step 2: Set SIP account

Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters.

Select “Activate”, and then click [Apply] to save this setting.

Quick installation Guide

PA3

Step 3: Set the volume (if not connected can skip)

Intercom settings => Media Settings => Media Settings

Set the device volume size, as shown below, click [Apply].

Hands-free speakerphone volume setting: normal call speaker volume size.

Hands-free Mic Gain: microphone volume size.

Step 4: Set function key (if not connected can skip)

Set the function key as shown below for a quick start, click [Apply] to save this settings.

Type: Memory key

Number 1 (Value): the function key will dial to this number 1

Number 2 (Value 2): if number 1 is unavailable, it will be forwarded to number 2.

Subtype: speed dial

Line: working line

Quick installation Guide

PA3

Information on this document is subject to change without notice. Fanvil makes no warranties with

Respect to this document, due to misuse this document is caused by indirect or incidental damages,

Fanvil does not assume any responsibility.

For more product information, please visit www.fanvil.com

Step 5: Set speaker (Default Panel speaker mode)

Intercom settings => Media Settings => Speaker Settings

Default Panel speaker mode, It is the intercom panel terminal with shell, in order to ensure the

speech effect and avoid damaging the speaker, the output power is limited to 10W.

If you need a high-power speaker for broadcasting, you can adjust it to the external speaker mode:

The 10W / 20W / 30W can be selected according to the power of the external horn.

But it is necessary to match the corresponding power adapter.

Power adapter Output Power Speaker spec

PoE 10W 10W/4Ω

12V/2A DC 10W 10W/4Ω

18V/2A DC 20W 20W/4Ω

24V/2A DC 30W 30W/4Ω

Quick installation Guide

PA3

Andere Handbücher für PA3

Inhaltsverzeichnis

Andere Fanvil Tor Handbücher

Fanvil

Fanvil PA2S Installations- und Benutzerhandbuch

Fanvil

Fanvil PA2S Bedienungsanleitung

Fanvil

Fanvil G100S Bedienungsanleitung

Fanvil

Fanvil PA2S Installations- und Benutzerhandbuch

Fanvil

Fanvil A1 Bedienungsanleitung

Fanvil

Fanvil PA2 Bedienungsanleitung

Fanvil

Fanvil G200S Bedienungsanleitung

Fanvil

Fanvil GA10 Bedienungsanleitung

Fanvil

Fanvil A2 Betriebshandbuch

Fanvil

Fanvil PA2S Bedienungsanleitung

Fanvil

Fanvil A1 Bedienungsanleitung

Fanvil

Fanvil PA3 Bedienungsanleitung

Fanvil

Fanvil LINKVIL W712 Bedienungsanleitung

Fanvil

Fanvil ATA Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung