Fanvil X5S Bedienungsanleitung
Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 Introduction
■
2 Video Tutorial
■
3 Requirements
■
3.1 Identifying phone model
■
3.2 Phone firmware
■
3.3 DHCP server
■
3.4 PBXware version
■
4 Installation
■
4.1 Power adapter
■
4.2 Power over Ethernet (PoE)
■
4.3 Find the phone IP address
■
4.4 Reset to factory settings
■
5 Registering phone
■
5.1 Manual configuration
■
5.2 Auto Provisioning
■
6 Configure BLF
■
6.1 Extension Settings
■
6.2 Phone Settings
■
Introduction
This Configuration Guide is written as general guide on how to configure the Fanvil phone
model X5S to work with PBXware 4.1.3.
Fanvil X5S supported features:
Multiple VoIP accounts
■
Auto provision via TFTP/HTTP/HTTPS
■
Call hold, mute, DND
■
Call forward, call waiting, call transfer
■
Redial, call return, auto answer
■
3-way conferencing
■
Dial plan, XML Browser
■
Codecs:G.722, G.711(A/u), G.729AB, G.723, G.726, iLBC
■
XML/LDAP remote phonebook
■
Call history:dialed/received/missed/forwarded
■
Busy Lamp Field (BLF)
■
Anonymous call, anonymous call rejection
■
Music on hold
■
Voice mail
■
Call park, call pickup
■
SRTP for voice
■
Time and date synchronization using SNTP
■
DTMF: In-band, Out-of-band (RFC2833) and SIP INFO
■
IP assignment: static/DHCP/PPPoE
■
Video Tutorial
Video tutorial explaining Auto Provisioning setup for Fanvil Phone on PBXware 4.
Video tutorial explaining Auto Provisioning setup for Fanvil Phone on PBXware 5.
Requirements
Identifying phone model
To start and successfully complete registration of your Fanvil phone you need to know which
phone model you will setup.
From the back of each Fanvil phone there are exact model information that you should check.
Although different phone models can have exactly the same requirements and installation
procedure, phone models can also have significantly different requirements and installation
procedure, so that ignorance of your own model may result in the inability to successfully set up
your phone.
Phone firmware
Make sure that your phone is loaded with appropriate firmware version, 0.9.0.
■
To find out the firmware version of your Fanvil phone model open a new browser window and
■
enter your phone IP address in order to access the phone web administration interface login
screen. Example: http://192.168.1.22.
Login to phone web administration interface with your username and password. Please note,
■
factory default login details are username: admin and password: admin.
DHCP server
Fully configured and operational DHCP server.
PBXware version
PBXware version 4.1.3.0
In order to find out the PBXware version:
Login to PBXware
■
Navigate to Settings: About.
■
On the top of About page is a code similar to this one PBXware Edition: Business, Release:
4.1.3.0 (387597b7), Running: 1.8.32.1-gc-b47edc45, PBXware Proxy v4.1.3 (62b7bcd),
API: 4.1, libmemcached version: 1.0.14, where Release denotes the exact version of your
PBXware.
Installation
This chapter describes how to install and connect the phone to the electrical power and data
network as well as how to apply factory settings.
The following topics are covered:
Power adapter
■
Power over Ethernet (PoE)
■
Factory Settings
■
Power adapter
Connect the Network and Power
Connect the DC plug on the power adapter to the DC port on the phone and connect the other
■
end of the power adapter into an electrical power outlet.
Connect the ethernet cable between the Internet port on the phone and the network port on a
■
router or switch to access LAN.
NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.
Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.
Power over Ethernet (PoE)
Connect the Network (only)
Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE)
compliant router or switch.
Connect the Ethernet cable between the Internet port on the phone and an available port on
■
the in-line power router or switch.
NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter.
Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.
Find the phone IP address
Press OK button two times.
■
IP address will be shown on top of the display.
Reset to factory settings
This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used then it is a must.
Open a new browser window and enter your phone IP address in order to access the phone
■
web administration interface login screen. Example: http://192.168.1.22.
Login to phone web administration interface with your username and password. Please note,
■
factory default login details are username: admin and password: admin.
Click on Configurations tab.
■
Click on Reset Phone section.
■
Click on Reset button in order to reset the phone to factory settings. Phone will be reset to the
■
factory settings and reboot.
Wait sometime prior for device to reboot.
■
NOTE: Do not unplug or remove power to the phone while it is updating firmware and
configurations.
Registering phone
This chapter describes how to identify Fanvil phone model, requirements that must be met and
how to register the phone using manual configuration or auto provisioning.
The following topics are covered:
Manual configuration
■
Auto provisioning
■
Manual configuration
This chapter describes how to set UAD settings, create PBXware extension and register the
phone.
The following topics are covered:
UAD settings
■
Creating extension
■
Registering phone
■
UAD Settings
UAD settings
Login to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware web
■
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
■
UAD settings
Navigate to Settings:UAD.
■
Make sure Fanvil UAD is enabled. To check the UAD status click on the edit icon
■
corresponding to your Fanvil phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
■
Click on the Save button to save changes.
■
Creating extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
■
The standard options window will be shown below.
■
Select Fanvil phone model from the UAD select box.
■
Select Location: Local or Remote.
■
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
■
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
■
Enter a name for the extension being created. Example: John Smith.
E-mail
■
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]
Department
■
Department to which extension will belong to. Example: Sales.
Click on the Save button.
■
Registering Phone
This chapter describes how to register Fanvil phone using Hostname or IP Address.
Hostname or IP Address
Login to phone web administration interface
Open a new browser window and enter your phone IP address in order to access the phone
■
web administration interface login screen. Example: http://192.168.1.22
Login to phone web administration interface with your username and password. Please note,
■
factory default login details are username: admin and password: admin.
Click on Line link in the left hand navigation menu
■
Enter or set the following details into the respective fields.
■
REQUIRED FIELDS:
Username
■
PBXware extension number. Example: 1003
Authentication Name
■
Usually the same number as the Phone Number.
Authentication Password
■
The Secret of the extension as received in the e-mail associated with this extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
extension.
Activate
■
Make sure the Activate check box is selected.
SIP Proxy Server Address
■
Enter the Hostname or IP Address of the PBXware.
- Example for Hostname: voip.bicomsystems.com
- Example for IP Address: 192.168.1.10
Click on the Apply button.
■
If everything is done as above described, you should have successfully registered your phone
■
to PBXware. Dial *123 to verify registration.
Auto Provisioning
This chapter describes how to set UAD settings, create PBXware extension and register the
phone using DHCP or Static IP address.
The following topics are covered:
UAD Settings
■
Creating Extension
■
Registering Phone
■
UAD Settings
UAD settings
Login to PBXware web administration interface.
Open a new browser window and enter the IP address in order to access the PBXware web
■
administration login screen. Example: http://192.168.1.10.
Login to PBXware with your e-mail address and password.
■
UAD settings.
Navigate to Settings:UAD.
■
Make sure Fanvil UAD is enabled. To check the UAD status click on the edit icon
■
corresponding to your Fanvil phone.
Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
■
Click on the Save button to save changes.
■
Creating Extension
Creating Extension
Add Extension
Navigate to Extensions. Click on Add Extension.
■
The standard options window will be shown below.
■
Select Fanvil phone model from the UAD select box.
■
Select Location: Local or Remote.
■
Local is for all extensions registered on the LAN and Remote is for all extensions
registered from remote networks, WAN, Internet etc.
Click on the Next step button.
■
Extension values
Enter values into the required field text boxes.
REQUIRED FIELDS:
Name
■
Enter a name for the extension being created. Example: John Smith.
E-mail
■
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: [email protected]
Auto Provisioning
■
Set to Yes.
MAC Address
■
Enter Fanvil phone MAC address. Example: 0C383E123456. MAC address can be found
at the back of the phone.
Click on the Save button.
■
Registering Phone
This chapter describes how to register Fanvil phone using TFTP & HTTP & HTTPS.
TFTP & HTTP & HTTPS
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
■
Enter username and password and press Confirm button. NOTE: Factory default login
■
details are username: admin and password: admin.
Click on Auto Provision in the navigation tab.
■
Enter Auto Provisioning username and password into Authentication Name and
■
Authentication Password fields.
Make sure the Download CommonConfig enabled check box is NOT selected.
Click on Static Provisioning Server
■
Choose what Protocol Type you intend to use: HTTP, HTTPS or Trivial FTP. NOTE: Our
■
recommendation is to use the HTTP.
If you choose to use Protocol Type HTTP or HTTPS enter http:// or https://
followed by Hostname or IP Address, followed then by /prov.
Example for Hostname using HTTP: http://abc.bicomsystems.com/prov
Example for Hostname using HTTPS: https://abc.bicomsystems.com/prov
Example for IP Address using HTTP: http://192.168.1.10/prov
Example for IP Address USING HTTPS: https://192.168.1.10/prov
If you choose to use Protocol Type TFTP enter tftp:// followed by Hostname or IP
Address
Example for Hostname: https://voip.bicomsystems.com
Andere Handbücher für X5S
2
Inhaltsverzeichnis
Andere Fanvil IP-Telefon Handbücher
Fanvil
Fanvil V64 Bedienungsanleitung
Fanvil
Fanvil C62 Bedienungsanleitung
Fanvil
Fanvil D800 Bedienungsanleitung
Fanvil
Fanvil C58 Bedienungsanleitung
Fanvil
Fanvil BW210 Bedienungsanleitung
Fanvil
Fanvil V Series Bedienungsanleitung
Fanvil
Fanvil X3G Bedienungsanleitung
Fanvil
Fanvil D900 Bedienungsanleitung
Fanvil
Fanvil C66 Bedienungsanleitung
Fanvil
Fanvil X3SG Pro Bedienungsanleitung
Fanvil
Fanvil X3U Pro Bedienungsanleitung
Fanvil
Fanvil X4G Bedienungsanleitung
Fanvil
Fanvil FV6030 Bedienungsanleitung
Fanvil
Fanvil X4U Bedienungsanleitung
Fanvil
Fanvil X3SP Bedienungsanleitung
Fanvil
Fanvil C600 Bedienungsanleitung
Fanvil
Fanvil X2CP Bedienungsanleitung
Fanvil
Fanvil C58 Bedienungsanleitung
Fanvil
Fanvil V67 Bedienungsanleitung
Fanvil
Fanvil F52 Bedienungsanleitung
