Installation Instructions for Xwire Adapters — Lit. Part Number: 229-51316 Rev B
24/7 Toll-Free Technical Support: 1-800-243-9271
The unauthorized use or duplication of the software described herein, or this material, is strictly prohibited.
Page 2
XwireTM Adapter Installation
Table of Contents
Introduction ..................................................................... 2
Installation: Universal Adapter for
TRACKER Timers ................................................ 3
Installation: Universal Adapter for
Fryers & Ovens .................................................. 4-5
Installation - Bezel Adapter for VC-210 & EM-99
Controllers ......................................................... 5-6
Installation - Wireless.Gateway Adapter..................... 7
Customer Support, Warranty
and Other Information ........................................11
Introduction
FAST is not liable for any use of product not in accordance with FAST’s installation
and operating instructions.
Thank you for your purchase. In choosing FAST, you
have chosen a product with over 35 years of innova-
tion and quality manufacturing behind it. FAST’s new
Xwire™ line of Mesh Network Protocol wireless
communication products allow Foodservice and
Restaurant Operators the ability to efficiently link
multiple appliances and timers for synchronizing food
equipment and monitoring inventory levels, energy
consumption and usage levels.
The following will guide you through installing an
Xwire Universal Adapter for FAST TRACKERTM
Timers and fryers and ovens, the Xwire Bezel for VC-
210 and EM-99 Process Controllers, and the
Wireless.Gateway Adapter.
BEFORE USING THIS EQUIPMENT, OR FOR ANY QUESTIONS ON THE OPERATION OF
THE APPLIANCE, CONSULT AND FOLLOW ALL INSTRUCTIONS AND SAFETY
WARNINGS FOUND IN THE APPLIANCE OPERATOR’S MANUAL SUPPLIED FROM
THE MANUFACTURER OF THE APPLIANCE.
Changes or modifications not expressly approved by FAST, Inc. could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
