Fast RAVEN HAWKEYE Benutzerhandbuch
80-600043-01 RAVEN HAWKEYE SETUP 5-20-2020
PAGE 1
CALIBRATION REFERENCE SHEET
PAGE 2
EXAMPLE NOZZLE SETTINGS
SECTIONS TIPS INCHES SECTIONS TIPS INCHES SECTIONS TIPS INCHES
1 3 45 1 3 60 1 6 90
2 3 45 2 3 60 2 6 90
3 5 75 3 3 60 3 6 90
4 6 90 4 3 60 4 6 90
5 6 90 5 3 60 5 6 90
6 5 75 6 4 80 6 6 90
7 5 75 7 4 80 7 6 90
8 3 45 8 4 80 8 6 90
9 3 45 9 4 80 9 6 90
10 5 75 10 4 80 10 6 90
11 5 75 11 4 80 11 6 90
12 6 90 12 3 60 12 6 90
13 6 90 13 3 60 13 6 90
14 5 75 14 3 60 14 6 90
15 3 45 15 3 60 15 6 90
16 3 45 16 3 60 16 6 90
TOTAL 72 1080 TOTAL 54 1080 TOTAL 96 1440
SECTIONS TIPS INCHES SECTIONS TIPS INCHES
1 3 60 1 3 66
2 3 60 2 3 66
3 5 100 3 5 110
4 6 120 4 6 132
5 6 120 5 6 132
6 5 100 6 5 110
7 5 100 7 5 110
8 3 60 8 3 66
9 3 60 9 3 66
10 5 100 10 5 110
11 5 100 11 5 110
12 6 120 12 6 132
13 6 120 13 6 132
14 5 100 14 5 110
15 3 60 15 3 66
16 3 60 16 3 66
TOTAL 72 1440 TOTAL 72 1584
Hawkeye120foot20"spacing Hawkeye132foot22"spacing
Hawkeye120foot15"spacingHawkeye90foot20"spacingHawkeye90foot15"spacing
PAGE 3
RAVEN HAWKEYE SETUP
Select Machine Type:
For Sprayers use: “Sprayer”
For Applicators use “Liquid Fert. Tool”
Press Next.
Enter left nozzle count.
Press Next.
Enter nozzle spacing in inches.
Press Accept.
Nozzle spacing entered.
Press Next.
Enter NCV tip size.
Press Next.
PAGE 4
Press next to start auto indexing nozzles.
Auto indexing is preparing.
Place a check mark in to enable fence
rows.
Press Next.
Enter number of boom sections.
Press next.
Enter boom section widths in inches for
each boom section.
Press Next.
PAGE 5
Click each field and enter the value.
See manufacturer nozzle tip charts.
Press Accept.
Repeat until each boom section has the
correct value entered.
Press Next.
Enter the boom offset number in inches.
Press Next.
Click field, enter the value.
Click Accept.
Boom offset entered.
Press Next.
PAGE 6
Boom calibration wizard.
Press Next.
Enter the pressure sensor range.
Press Next.
Enter the flowmeter calibration number.
Press Next.
Flowmeter calibration number entered.
Press Next.
Flowmeter tag Pulse/Units number.
Flowmeter tag Pulse/Units number.
PAGE 7
Enter the target rate.
Press Next.
Target rate entered.
Consult your chemical Dealer for proper
settings.
Press Next.
Enter the target pressure.
Consult your chemical Dealer for proper
settings.
Press next.
Home screen.
Press the tools button.
PAGE 8
Check the following boxes in the user set-
tings screen.
Press Next.
Calibration summary screen.
Select Standard.
Select Virtual.
Press Next.
Review and verify settings.
Press Home.
Boom section 1 screen.
Use arrows to scroll through to view each
section.
Inhaltsverzeichnis
Andere Fast Steuerungssystem Handbücher
