FBII XL-2T Montageanleitung

L-

-2

Security System

Installation and Setup Guide

N9833V2 2/00

XL-2T Installation & Setup Guide

iii

THANK YOU for your purchase of the

XL-2T Security System.

The purpose of this manual is to give you a brief overview of the XL-2T control panel, and provide instruc-

tions for installing a basic system. FBII is always available to serve YOU. Our SALES and TECHNICAL

SUPPORT staff are available to assist you in any way possible.

FOR TECHNICAL SERVICE,

CALL TOLL-FREE

1-800 645-7492

Before you call Technical Service, PLEASE be sure you:

•Check the wiring diagram and verify your connections.

•Check all fuses.

•Ensure that the transformer and backup battery voltages are supplying the proper voltage levels.

•Verify your programming information.

•Read this manual thoroughly.

•Consult the Troubleshooting Section of this Manual.

•Note the proper model number of this product, and the version level (if known) along with any docu-

mentation that came with the product.

•Have your company name and telephone number ready.

This information will allow us to service you more quickly and effectively. Please, remember to BE PATIENT

while waiting on the telephone; your call will be answered as soon as possible.

FOR YOUR CONVENIENCE, a System Planning Worksheet and a Programming Worksheet are included at

the back of this manual. These can be removed to help you record account information.

Table of Contents

•••••••••••••••••••••••••••••••••••••••••••••••••

CONVENTIONS USED IN THIS MANUAL........................................................................................VI

XL-2T TO XL-2 COMPARISON..........................................................................................................VII

SECTION 1 - INTRODUCTION.......................................................................................1–1

Features........................................................................................................................................1–1

Compatible Keypads......................................................................................................................1–2

SECTION 2 - PC BOARD AND KEYPAD MOUNTING.............................................2–1

Mounting the XL-2T PC Board......................................................................................................2–1

Mounting the XK-4600RM Keypad ................................................................................................2–2

Mounting the XK-4600SM Keypad.................................................................................................2–3

Mounting the XK-406 and 6615 Keypads......................................................................................2–4

Surface Mounting the XK-508 and XK-5LC Keypads .....................................................................2–5

Surface Mounting the XK-7LC Keypad..........................................................................................2–5

Recess Mounting the XK-7LC Keypad............................................................................................2–6

SECTION 3 - SYSTEM WIRING AND HOOKUP ........................................................3–1

System Wiring Diagram ................................................................................................................3–1

Terminal Connections....................................................................................................................3–2

Auxiliary Device Current Draw Worksheet....................................................................................3–7

Wiring Information for Keypads and Other Devices.......................................................................3–7

SECTION 4 - KEYPAD FEATURES..............................................................................4–1

Keypad Layout ..............................................................................................................................4–1

System Mode Summary.................................................................................................................4–4

Keypad Sounder ............................................................................................................................4–5

Keypad Addressing........................................................................................................................4–5

SECTION 5 - SYSTEM OPERATION............................................................................5–1

Power-Up/System Reset.................................................................................................................5–1

Arming the System........................................................................................................................5–1

Stay Arming..................................................................................................................................5–1

Instant Arming..............................................................................................................................5–2

Stay/Instant Arming......................................................................................................................5–2

System Mode Summary.................................................................................................................5–2

Disarming......................................................................................................................................5–2

Reset .............................................................................................................................................5–2

Bypass by Zone/Group...................................................................................................................5–2

Quick Bypass by Zone/Group.........................................................................................................5–3

Auto Unbypass ..............................................................................................................................5–4

Manual Unbypass..........................................................................................................................5–4

User Code Programming................................................................................................................5–4

User Deletion.................................................................................................................................5–5

Keypad Emergency Conditions ......................................................................................................5–5

Quick Command Modes.................................................................................................................5–5

Installer Modes..............................................................................................................................5–8

Table of Contents

•••••••••••••••••••••••••••••••••••••••••••••••••

SECTION 6 - SYSTEM PROGRAMMING....................................................................6–1

General..........................................................................................................................................6–1

Programming Questions................................................................................................................6–1

Pager.............................................................................................................................................6–3

Dual Reporting..............................................................................................................................6–3

Single Reporting............................................................................................................................6–4

Backup Dialing..............................................................................................................................6–4

Zone Descriptor Programming.....................................................................................................6–29

SECTION 7 - DATA ENTRY VIA KEYPADS...............................................................7–1

General..........................................................................................................................................7–1

How to Enter Programming Mode via Either LED or LCD Keypads..............................................7–1

What You See on the LED Keypads...............................................................................................7–1

What You See on the LCD Keypad.................................................................................................7–2

How to Enter Data.........................................................................................................................7–2

SECTION 8 - SYSTEM DEFAULTS ..............................................................................8–1

SECTION 9 - SUMMARY OF KEYPAD FUNCTIONS................................................9–1

User Functions..............................................................................................................................9–1

Installer Modes..............................................................................................................................9–1

APPENDIX A - CENTRAL STATION REPORTING FORMATS..................................................A–1

Standard (3x1 or 4x1) ....................................................................................................................A–1

Extended (3x1 Ext. or 4x1 Ext.).....................................................................................................A–2

Partial Extended (3x1 Part. Ext. or 4x1 Part. Ext.)........................................................................A–2

3x2 or 4x2......................................................................................................................................A–2

FBII Superfast (4x3x1) ..................................................................................................................A–3

ADEMCO 4x1 Express...................................................................................................................A–3

ADEMCO 4x2 Express...................................................................................................................A–3

ADEMCO Point ID........................................................................................................................A–4

APPENDIX B - TROUBLESHOOTING.............................................................................................B–1

APPENDIX C - SYSTEM PLANNING WORKSHEET....................................................................C–1

APPENDIX D - SYSTEM PROGRAMMING WORKSHEET.........................................................D–1

APPENDIX E - WARNINGS AND LIMITATIONS...........................................................................E–1

APPENDIX F - REGULATORY AGENCY STATEMENTS ...........................................................F–1

APPENDIX G - WARRANTY INFORMATION ...............................................................................G–1

Conventions Used in This Manual

•••••••••••••••••••••••••••••••••••••••••••••••••

Before you begin using this manual, it is important that you understand the meaning of the

following symbols (icons) and text note.

ULThese notes include specific information that must be followed if you are installing this system for

a UL Listed application.

These notes include information that you should be aware of before continuing with the installa-

tion, and which, if not observed, could result in operational difficulties.

This symbol indicates a critical note that could seriously affect the operation of the system, or

could cause damage to the system. Please read each warning carefully. This symbol also alerts

the user to the possibility of physical harm if instructions are not followed as written.

NOTE: These text notes are provided throughout the manual to provide information and shortcut tips for

the installer.

vii

XL-2T to XL-2 Comparison

•••••••••••••••••••••••••••••••••••••••••••••••••

The XL-2T is an enhanced version of the XL-2 control panel. Some new features have been added and others

have been modified. The following is a quick HELP comparison.

XL-2T NEW & MODIFIED FEATURES XL-2 SIMILAR FEATURES

7 Zones: all fully programmable, including Keyswitch.......7 Zones: 6 fully programmable + 1 prog. only

•(Program Questions 17-23)

Zone Loop Types (EOL, N/O, or N/C) ..................................EOL Loop Type Only

•(Program Questions 17-23)

Audible or Silent by Zone..................................................Audible Only

•(Program Questions 17-23)

15 User Codes & Door Strike User Capability....................6 User Codes: No Door Strike User Capability

Bell Supervision - New NFPA 72 Requirement .....................NONE

•(Program Question 22)

Unattended Download (Installer Mode 8)...........................Standard Download Only

On-line Download (Installer Mode 9)..................................Standard Download Only

Additional Formats: FBI Superfast, Point ID.....................Pulse Formats Only

•(Program Questions 7 & 8)

Dual CS Reporting ............................................................Single CS Reporting

•(Program Questions 7 & 8)

16-Digit Phone Numbers (CS1 & CS2)................................12-Digit Phone Numbers (CS1 & CS2)

Built-in Siren Driver or Conventional Bell Output............Conventional Bell Output Only

•(Program Question 12)

Cross Zoning to Prevent False Alarms...............................NONE

•(Program Questions 17-23)

2 Entry Timers .................................................................1 Entry Timer

•(Program Question 11)

Swinger Shutdown - Bell and Dialer Lockout........................Bell Lockout

•(Program Question 04)

Call Waiting /PBX Dialing - 1-digit entry ............................Multiple digits required

•(Program Questions 01 & 02)

78-Event History (Alarms, Troubles, Low Battery) .................Alarm Memory (cleared by user code)

•Not cleared by user code (Installer Mode 4)

2 Programmable Output Triggers......................................NONE

Terminal P1

•(Program Question 14)

CS Test Timer - 1 Hr, 1 Day, 7 Day, 27 Day, ..........................CS Test Timer: 1 Day Only by Event

60 Day, or 90 Day by Time, Event, or Both

•(Program Question 10)

Recent Close Code.............................................................NONE

•(Program Question 35)

End User Chime ON/OFF Toggle(Quick Com. [#] 6).............NONE

Exit Error Warning (always enabled)...................................NONE

Quick Exit.........................................................................NONE

•(Program Question 9)

Arm While Faulted ............................................................NONE

•(Program Question 12)

Restore Follows Bell or Loop.............................................Restore Follows Bell Only

•(Program Question 07)

System Stabilization on Power-Up - to Eliminate ...............NONE

Motion Detector False Alarms

Fast Loop Response (10mSec) Option by Zone...................NONE

•(Program Questions 17-23)

XL-2T NEW & MODIFIED FEATURES XL-2 SIMILAR FEATURES

AC (50/60 Hz) Based System Real-Time Clock ....................Software-Based System Timing

viii

•(Program Question 07)

Stay Mode 40 Sec. Dialer Delay w/ Bell & Keypad..............Stay Mode Entry Delay w/ Keypad Sounder

Sounder Warning for All Zones warning for Exit/Entry Zones Only

•(Program Question 12)

Auto Arming in Different Modes .......................................NONE

•(Program Question 08)

LED Display and Sounder on Entry Zone ..........................Sounder Only

(always enabled)

Programmable Dialer Attempts: 1 - 15 ...............................Non-programmable 8 Dialer Attempts

•(Program Question 09)

LED Extinguish on Keypads..............................................NONE

•(Program Question 12)

Keypad Tamper/Lockout ..................................................NONE

•(Program Question 12)

Bell Supervision (enabled when Fire Zone is .........................NONE

programmed)

Separate Fire Trouble & Day Trouble Codes .....................Same Code for both

•(Program Question 32)

Temporal Bell....................................................................NONE

•(Program Question 12)

AC/Low Battery Keypad Sounder Disable..........................NONE

•(Program Question 12)

Dial Tone Detect Dialer.....................................................Dialer will not detect dial tone

•(Program Question 13)

Fire Zone Type without Verification..................................NONE

•(Program Questions 17-23)

Interior Follower Zone Type without Stay Arming............NONE

•(Program Questions 17-23)

Chime Trigger...................................................................NONE

•(Program Question 14)

Alarm Reset Trigger..........................................................NONE

•(Program Question 14)

Pulse Sound During Exit Time..........................................NONE

•(Program Question 06)

Exit Time Restart..............................................................NONE

•(Program Question 11)

Walk Test Mode.................................................................NONE

•(Program Question 30)

Pager Format ...................................................................NONE

•(Program Question 07)

Exit Delay When Armed in ................................................No Exit Delay

Instant or Stay Instant Mode

Over Three Zones Bypassable............................................Program Question 09, Location 3

CS Test Does Ring Back ....................................................Program Question 13, Location 1

Dial Delay Option of 15 or 30 seconds................................Program Question 13, Location 1

Cancel Display on an LCD Keypad ....................................Program Question 13, Location 1

Only User 4 Will Send Open and Close Report...................Program Question 13, Location 2

Keypad Sounder Beeps During Exit Time..........................Program Question , Location

1–1

SECTION 1

Introduction

•••••••••••••••••••••••••••••••••••••••••••••••••

Features The XL-2T is a state-of-the-art microprocessor-based control/communicator. The system fea-

tures seven fully programmable zones. Programming can be performed through any of the

compatible keypads, or the system can be uploaded and downloaded remotely using the

EZMATE/COMPASS PC Downloader Software. Additionally, the software can be pro-

grammed to control remote actions, such as arming, disarming, bypassing, etc. Programming

options are stored in an Electrically Erasable Programmable Read-Only Memory (EEPROM).

The EEPROM is nonvolatile, meaning that programmed instructions will not be lost in the

event of a loss of power.

Features of the XL-2T include:

•7 zones (all fully programmable, including keyswitch)

•15 user codes (Ambush, Arm only, and Door Strike capability)

•Pager formatting capability

•Keypad programming and remote programming via PC and modem

•Upload/download and remote commands with answering machine override capability

•3 methods of uploading/downloading: PC operator-initiated, unattended

downloading, and on-line downloading

•Optional built-in 2-tone siren driver or conventional bell output

•Auto arming at a specific time of day with capability to arm in either Away, Stay, or

Instant mode

•Dual-entry timers

•78-event history log (alarms, troubles, low battery, bypasses, Central Station (CS) test,

openings, and closings)

•3 emergency keypad conditions (panic, fire, and auxiliary)

•2 programmable trigger outputs

•Real-time clock (displays time and date via LCD keypad) with reminder when clock needs

to be set

•CS Test timer by event, time, or both (1 hour, 1, 7, 27, 60, 90 days)

•Customer control of Chime mode

•Quick Arming, Quick Bypass, and Quick Force Arming

•CS reporting by zone

•False alarm prevention features: Cross Zone, Exit Error, Recent Close, Swinger Shutdown

Cancel Code, and System Stabilization during power-up

•Arming by keyswitch in Away or Stay mode

•Keypad tamper/lockout with optional CS reporting

•Restore transmission options: After Loop or After Bell

•Fire zone reset through keypad

•Glassbreak reset through keypad

•Bell Test, Low Battery Test, AC loss, and Communications Failure

•Input power: 12VAC, 20VA; 12VDC, 4-7AH

•Output power: 12VDC, 500mA

•Bell output power: 12VDC, 1A

•Exit delay when armed in Instant or Stay Instant mode

XL-2T Installation & Setup Guide

1–2

Compatible Keypads

The XL-2T security system is compatible with the following keypads only:

LED STYLE KEYPADS LCD STYLE KEYPADS

XK-406* XK-5LC**

XK-508** XK-7LC**

XK-4600RM*

XK-4600SM*

6615*

* Non-Addressable Keypad

** Addressable Keypad

KEYPAD NOTES:

•The system supports Light Emitting Diode (LED) style keypads or Liquid Crystal Dis-

play (LCD) style keypads.

•DO NOT USEaddressable and non-addressable keypads in a single installation.

•If only six zones must be displayed, up to four LED style keypads may be installed in the

system.

•If all seven zones must be displayed, either the XK-508, XK-5LC, or XK-7LC keypad

must be used.

Failure to install and program this unit in accordance with the UL requirement is a violation of the

listing mark. For more information on UL Listings, contact Underwriters Laboratories, Progress

Department, 333 Pfingsten Road, Northbrook IL 60062.

The XL-2T is a Residential (Household) control panel and has been listed by Underwriters

Laboratories for the following applications:

•UL 1023 Household Burglary

•UL 985 Household Fire Warning

Andere Handbücher für XL-2T

Inhaltsverzeichnis

Andere FBII Sicherheitssystem Handbücher

FBII

FBII XL4600RM Bedienungsanleitung

FBII

FBII XL-4 Bedienungsanleitung

FBII

FBII XL-2S Silver Bedienungsanleitung

FBII

FBII XL-2T Montageanleitung

FBII

FBII XL-20 Bedienungsanleitung

FBII

FBII OMNI-408EU Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII OMNI-848EU Bedienungsanleitung

FBII

FBII XL4612RM Bedienungsanleitung

FBII

FBII XL-1S Bedienungsanleitung

FBII

FBII XL Star 4500 Bedienungsanleitung

FBII

FBII XL4600DL Bedienungsanleitung

FBII

FBII XL-2T Bedienungsanleitung

FBII

FBII XL-2P Bedienungsanleitung

FBII

FBII OMNI-624EU Bedienungsanleitung

FBII

FBII XL-2 Gold Bedienungsanleitung

FBII

FBII Star XL4800 EZ Bedienungsanleitung

FBII

FBII OMNI-848 Bedienungsanleitung

FBII

FBII OMNI-400 EU Montageanleitung

FBII

FBII LEGEND SERIES Bedienungsanleitung

FBII

FBII XL-2 Gold Bedienungsanleitung

FBII

FBII XL-21 Bedienungsanleitung

FBII

FBII XL-4 Bedienungsanleitung

FBII

FBII Star XL4800EZ Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung