Feider Machines FST212 Bedienungsanleitung

ORIGINAL INSTRUCTIONS

SCARIFIER PETROL

FST212

INSTRUCTION MANUAL

IMPORTANT: Please read the instruction manual before using.

BUILDER SAS

32, rue Aristide Bergès -ZI 31270 Cugnaux –France

Made in PRC 2021

8 12

max.

min.

CONTENTS

1. SAFETY INSTRUCTIONS 5

2. DESCRIPTION 10

3. OPERATION 12

4. MAINTENANCE AND STORAGE 14

5. TROUBLESHOOTING GUIDE 16

6. DECLARATION OF CONFORMITY 17

7.WARRANTY 18

8.PRODUCT FAILURE 19

9.WARRANTY EXCLUSIONS 20

1. SAFETY INSTRUCTIONS

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operation practices.

Training

a) Read the instructions carefully. Be familiar with the controls and the proper use of the machine.

Preparation

a) Never allow people unfamiliar with these instructions or children to use the machine. Local regulations can

restrict the age of the operator;

b) Never operate the machine while people, especially children, or pets are nearby;

c) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or

their property;

d) Wear ear protection and safety glasses at all times while operating the machine;

e) While operating the machine. Always wear substantial footwear and long trousers. Do not operate the

machine when barefoot or wearing open sandals;

f) Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones

and other foreign objects;

g) WARNING — Petrol is highly flammable;

h) Store fuel in containers specifically designed for this purpose;

i) refuel outdoors only and do not smoke while refuelling;

j) Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is

running or when the engine is hot;

k) If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage

and avoid creating any source of ignition until petrol vapours have dissipated;

l) Replace all fuel tanks and container caps securely;

m) Replace faulty silencers;

n) Before using, always visually inspect to see that the tines, bolts are not worn or damaged.

Replace worn or damaged tines and bolts in sets to preserve balance;

o) For rear discharge appliances with exposed rear rollers, when used without a catcher, full eye protection

shall be worn.

Operation

a) Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect;

b) Operate the machine only in daylight or in good artificial light;

c) Avoid operating the machine in wet grass or take additional precautions to avoid slipping;

d) Always be sure of your footing on slopes;

e) Walk, never run;

f) Always work across the face of slopes, never up and down;

g) Exercise extreme caution when changing direction on slopes;

h) Do not operate the machine on steep slopes;

i) use extreme caution when reversing or pulling the machine towards you;

j) Stop the tines if the machine has to be tilted for transportation. Do not operate the tines when crossing

surfaces other than grass, and when transporting the machine to and from the working area;

k) Never operate the machine with defective guards, or without safety devices, for example deflectors and/or

catchers, in place;

l) Do not change the engine governor settings or over-speed the engine;

m) Disengage all tine and drive clutches before starting the engine;

n) Start the engine or switch on the motor carefully according to instructions and with feet well away from the

tine(s);

o) Do not tilt the machine when starting the engine or switching on the motor, except if the machine has to be

tilted for starting. In this case, do not tilt it more than absolutely necessary and lift only the part which is away

from the operator;

p) Do not start the engine when standing in front of the discharge chute;

q) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times;

r) Never pick up or carry a machine while the engine is running;

s) Stop the engine, disconnect the spark plug wire and for battery start machines remove the ignition key:

before clearing blockages or unclogging chute;

before checking, cleaning or working on the machine;

After striking a foreign object. Inspect the machine for damage and make repairs before restarting and

operating the machine;

if the machine starts to vibrate abnormally (check immediately);

t) Stop the engine, disconnect the spark plug wire and for battery start machines remove the ignition key:

whenever you leave the machine;

before refuelling;

u) Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn

the fuel off at the conclusion of aerating or scarifying.

v) Danger – Do not touch the rotating tines

Maintenance and storage

a) Keep all nuts, bolts and screws tight to be sure the machine is in a safe working condition;

b) Never store the machine with petrol in the tank inside a building where fumes can reach an open flame or

spark;

c) Allow the engine to cool before storing in any enclosure;

d) to reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of

grass, thatch, moss, leaves or excessive grease;

e) Check the catcher frequently for wear or deterioration;

f) Examine the machine regularly and replace worn or damaged parts for safety;

g) If the fuel tank has to be drained, this should be done outdoors. The drained fuel should be stored in a

container specifically designed for fuel storage or it should be disposed of carefully.

Fuel Handling

Use caution when handling fuels. They are flammable and the vapors are explosive.

Use only an approved container.

Never remove the fuel cap or add fuel while the machine is on. Turn off the unit and allow the engine and

exhaust components to cool down before refueling.

Do not smoke.

Never refuel inside a room.

Never store the tool and the fuel tank indoors where there is a naked flame, such as near a water heater.

If fuel has spilled, do not attempt to start the machine, but move it away from the spill before starting to use it.

Please clean up any spills.

Replace and tighten the fuel tank cap after refueling.

Follow strictly the instructions in this manual for filling the tool with fuel.

During maintenance and storage

Switch off the tool and wait until it stops completely. Make sure that all moving parts are stopped.

Allow the machine to cool before performing inspection, adjustments, maintenance, servicing and storage.

Store the tool where fuel vapor will not reach a flame or spark.

The transport of the tool must be secured in order to avoid fuel spillage, accidents and injuries.

Residual risks

Even if you use this product in compliance with all safety requirements, the potential risks of injury and damage

remain. The following hazards may arise in the structure and design of this product:

There are risks of injury and property damage due to attachments or broken the sudden impact of hidden

objects when using cutting.

There are risks of injuries and accidents caused by flying objects.

Prolonged use of this product exposes the operator to vibrations and can produce so-called "white finger"

disease. To reduce the risk, wear gloves and keep your hands warm.

If any of the symptoms of "white finger syndrome" occur, seek immediate medical attention.

Symptoms of "white finger" include numbness, loss of sensitivity, tingling, pain, loss of strength, color changes

or skin condition. These symptoms usually appear on the fingers, hands or wrists. Risk increases at low

temperatures.

A long exposition to noise can affect the health of the operator. A hearing protection must be always used

when operating the tool. The operation of the tool must be limited and some rest must be taken between two

sessions (e.g. 10min of operation and 20min of rest).

Intended use

The equipment is designed for scarifying lawn areas. The scarifying process is designed for rip‐ping moss and

weeds ‐complete with their roots. Out of the soil and for loosening the soil. As a result your lawn can absorb

nutrients better and is cleaned. We recommend you to scarify you lawn in the spring (April) and autumn

(October).

Important!

Due to the high risk of bodily injury to the user, the equipment may not be used to grind up branch or hedge

clippings. Moreover, the equipment may not be used as a power cultivator to level out high areas such as mole

hills. For safety reasons, the equipment may not be used as a drive unit for other work tools or tool sets of any

kind.

The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.

The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a

result of this.

Please note that our equipment has not been designed for use in commercial, trade or industrial applications.

Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for

equivalent purposes.

Symbols

Read instruction manual

Warning! Risk of projections - Keep bystanders away

Sharp teeth - Be careful not to cut your fingers or toes. Remove the spark plug wire before

maintenance

Wear ocular protection

Wear hearing protection

Danger of carbon monoxide! Do not inhale

WARNING! Hot surface

Do not touch

Inhaltsverzeichnis

Andere Feider Machines Rasenmäher Handbücher

Feider Machines

Feider Machines FTDTR4870 Bedienungsanleitung

Feider Machines

Feider Machines FRT6224 Bedienungsanleitung

Feider Machines

Feider Machines FTDT561ZT Bedienungsanleitung

Feider Machines

Feider Machines FRT7550M Betriebsanleitung

Feider Machines

Feider Machines FTDT5170ZT Bedienungsanleitung

Feider Machines

Feider Machines FTDTR4240 Bedienungsanleitung

Feider Machines

Feider Machines FTDT5175ES Bedienungsanleitung

Feider Machines

Feider Machines FTDTR5220 Bedienungsanleitung

Feider Machines

Feider Machines FTDTR5220ES Bedienungsanleitung

Feider Machines

Feider Machines FTDT5070 Bedienungsanleitung

Feider Machines

Feider Machines FTDT461ZT Bedienungsanleitung

Feider Machines

Feider Machines FTDT511ZT-A Bedienungsanleitung

Feider Machines

Feider Machines FTDT5096ES Bedienungsanleitung

Feider Machines

Feider Machines FTDT4640ES Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

Craftsman

Craftsman 917.378461 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung