Feig Electronic ID ISC.MRMU102-A Bedienungsanleitung

Date: 2012-06-11

Vers. no. 1.12

m. dudde hochfrequenz-technik

Rottland 5a

D-51429 Bergisch Gladbach/ Germany

Tel: +49 2207-96890

Fax +49 2207-968920

Annex no. 5

User Manual

INTEGRATION

final – public (B)

2012-12-03 – Integration Manual M21112-1e-ID-B.docx

ID ISC.MRMU102-A

Module Version

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 2 of 21 Integration Manual M21112-1e-

ID-B.docx

Note

FEIG ELECTRONIC GmbH

Lange Strasse 4

D-35781 Weilburg

Tel.: +49 6471 3109-0

http://www.feig.de

With the edition of this document, all previous editions become void. Indications made in this manual may be

changed without previous notice.

Copying of this document, and giving it to others and the use or communication of the contents thereof are

forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved

in the event of the grant of a patent or the registration of a utility model or design.

Composition of the information in this document has been done to the best of our knowledge. FEIG

ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this

manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,

despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.

The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC

GmbH does not give any guarantee promise for perfect function in cross environments and does not give

any guaranty for the functionality of the complete system which incorporates the subject of this document.

FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed

with components and testing methods for a level of reliability suitable for use in or in connection with surgical

implants or as critical components in any life support systems whose failure to perform can reasonably be

expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application

designer must take reasonably prudent steps to protect against system failures.

Use Exclusion in Transportation Market: Devices which are subject of this document may NOT be sold,

used, leased, offer for sale, or otherwise transferred, exported, and imported by anyone in the Transportation

Market. “Transportation Market” means (i) Electronic Toll and Traffic Management (ETTM), (ii) Public Sector

Vehicle Registration, Inspection and Licensing Programs, (iii) Railroad Locomotive and Wagon tracking, (iv)

airport based ground transportation management systems (GTMS) and taxi dispatch, (v) revenue based

parking, and (vi) vehicle initiated mobile payment applications, where the RFID sticker/tag is initially attached

to the vehicle but not incorporated at the point of vehicle manufacture.

FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-

ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does

not convey any license under its patent rights nor the rights of others.

OBID®and OBID i-scan®are registered trademarks of FEIG ELECTRONIC GmbH.

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 3 of 21 Integration Manual M21112-1e-

ID-B.docx

General information's regarding this document

•The sign "" indicates extensions or changes of this manual compared with the former issue.

•If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or

for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this

may cause faulty operation of the reader.

•The following figure formats are used:

0...9: for decimal figures

0x00...0xFF: for hexadecimal figures,

b0...1 for binary figures.

•The hexadecimal value in brackets "[ ]" marks a control byte (command).

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 4 of 21 Integration Manual M21112-1e-

ID-B.docx

Contents

1. Safety Instructions / Warning - Read before start-up ! 5

2. Performance Features of the Reader 6

2.1. Available Reader Types ....................................................................................................6

2.2. Optional Accessories........................................................................................................6

3. Assembly and Wiring 7

3.1. Module Versions................................................................................................................7

3.1.1. Dimensions..................................................................................................................7

4. Connections 8

4.1. Antenna Terminals............................................................................................................8

4.1.1. External Antenna ANT 1 - 3 .........................................................................................8

4.1.2. Internal Antenna ANT 4..............................................................................................10

4.2. Power Supply via Connector X1.....................................................................................10

4.3. RS232 Interface on Connector X2 ..................................................................................11

4.4. USB Interface on Connector X3......................................................................................12

5. Control and Display Elements 12

5.1. LED...................................................................................................................................12

6. Technical Data 13

7. Radio Approvals 16

7.1. Europe (CE)......................................................................................................................16

7.2. Declaration of Conformity...............................................................................................17

7.3. USA (FCC) and Canada (IC)............................................................................................19

7.3.1. USA (FCC) and Canada (IC) warning notices............................................................ 19

7.3.2. USA (FCC) and Canada (IC) approved antennas ...................................................... 20

ANNEX A - Accessories.........................................................................................................21

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 5 of 21 Integration Manual M21112-1e-

ID-B.docx

1. Safety Instructions / Warning - Read before start-up !

•The device may only be used for the intended purpose designed by for the manufacturer.

•The operation manual should be conveniently kept available at all times for each user.

•Unauthorized changes and the use of spare parts and additional devices which have not been

sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such

unauthorized measures shall exclude any liability by the manufacturer.

•The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid

for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,

or omissions in the manual or automatically set parameters for a device or for an incorrect

application of a device.

•Repairs may only be executed by the manufacturer.

•Installation, operation, and maintenance procedures should only be carried out by qualified

personnel.

•Use of the device and its installation must be in accordance with national legal requirements

and local electrical codes .

•When working on devices the valid safety regulations must be observed.

•Special advice for carriers of cardiac pacemakers:

Although this device doesn't exceed the valid limits for electromagnetic fields you should keep

a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in

an immediate proximity of the device respective the antenna for some time.

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 6 of 21 Integration Manual M21112-1e-

ID-B.docx

2. Performance Features of the Reader

The Reader ID ISC.MRMU102 is designed for reading of passive data carriers, so-called „Smart

Labels“ at an operating frequency in the UHF band between 860 MHz and 960 MHz. Transponders

according to EPC Class1 Gen2 are supported. Optional an Upgrade Code for the reading of ISO

18000-6-C transponders is available. The reader is designed for application with small tag popula-

tion.

The reader module is equipped with 3 SMA connectors for conduction of external antennas (ANT1

– ANT3). Additional an integrated antenna (ANT4) is available.

For Host communication the reader provides an asynchronous RS232 interface and an USB inter-

face.

The reader is designed for use in applications with small tag populations. Maximum 10 tags at the

same time into the antenna field can be processed.

2.1. Available Reader Types

The following reader types are currently available:

Table 1: Available Reader Types

Reader type Description

ID ISC.MRMU102-A

Module version with asynchronous RS232- and USB-Interface;

3 SMA connectors for external antennas;

1 integrated antenna;

2.2. Optional Accessories

Optional Accessories are listed in the appendix.

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 7 of 21 Integration Manual M21112-1e-

ID-B.docx

3. Assembly and Wiring

3.1. Module Versions

This reader version has been designed for mounting in other equipment.

NOTE:

Before any installation the intended position of the reader should be tested for its suitabil-

ity.

3.1.1. Dimensions

137

Ø3,3

Ø7

125

107,5

LED

ANT1

FE 741

68,5

54,5

29,5

38,5

ANT2

22,5

ANT3

4,75

[DB1]

Figure 1: Dimensions of the housing version (all dimensions are in mm)

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 8 of 21 Integration Manual M21112-1e-

ID-B.docx

4. Connections

The module version of the reader is equipped with an asynchronous RS232 Interface (X2) and a

USB Interface (X3). The Table 2: Connectors shows which connector can be used for the different

interface cable.

Table 2: Connectors

Connector Description

ANT 1-3 External Antenna ANT 1 - 3

ANT 4 Internal Antenna ANT 4

X1 Power Supply via Connector X1

X2 RS232 Interface on Connector X2

X3 USB Interface on Connector X3

4.1. Antenna Terminals

4.1.1. External Antenna ANT 1 - 3

Three SMA sockets are provided on the circuit board for connecting of the external antennas.

The maximum tightening torque for the SMA socket is 0.45 Nm.

CAUTION:

Higher tightening torque will damage the connector.

Table 3: Connecting an external antenna

Terminal Description

ANT 1-3 Connecting the external antenna

(input impedance 50Ω)

NOTE:

When connecting an antenna, ensure that it does not exceed the permissible limits pre-

scribed by the national regulations for radio frequency devices.

OBID

i-scan

UHF

Integration

ID ISC.MRMU102-A

FEIG ELECTRONIC GmbH Page 9 of 21 Integration Manual M21112-1e-

ID-B.docx

Andere Handbücher für ID ISC.MRMU102-A

Inhaltsverzeichnis

Sprachen:

Andere Feig Electronic Steuereinheit Handbücher

Feig Electronic

Feig Electronic OBID i-scan ID ISC.MAT-A Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANT.U500/270 Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LR2500-A Bedienungsanleitung

Feig Electronic

Feig Electronic cVEND plug Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan D ISC.MU02.02 Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LRM2500-B Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.MRMU102-A Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.M02.M8-B Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LRM2500-A Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.PRH102-B Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.M02.M8 Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LRM2500-B Bedienungsanleitung

Feig Electronic

Feig Electronic TST WUI Installationshandbuch

Feig Electronic

Feig Electronic ID ISC.LRM1002-E Gebrauchs- und Pflegehandbuch

Feig Electronic

Feig Electronic OBID i-scan ID ISC.M02 Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.MU02.02 Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.M02.M8-B Bedienungsanleitung

Feig Electronic

Feig Electronic OBID ID RWA02.ABCD Series Benutzerhandbuch

Feig Electronic

Feig Electronic OBID i-scan ID ISC.M02 Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.MU02.02-CU Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.MRMU102-A Bedienungsanleitung

Feig Electronic

Feig Electronic ID MAX.U1002 Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.PR101-USB Bedienungsanleitung

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LR200 Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung