Fein KBE 50-2 Bedienungsanleitung

KBE 50-2

Technical data

C-SC_CSSM

Version 1.0

2017-05-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 1

Technical data

All the technical data can be found in the operating instructions for the model.

Tests

Up-to-date test data and test instructions after repair can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lubricants / Auxiliary substances

The lubricants or auxiliary substances and their container sizes available from FEIN can be found on the FEIN Extranet

(Customer Service → Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

KBE 50-2

Notes and requirements

C-SC_CSSM

Version 1.0

2017-05-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 1

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

KBE 50-2

Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2017-05-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 1

Lubricants and auxiliary substances

Grease

0 401 18 0300 9

120 g

gearbox

KBE 50-2

Troubleshooting

C-SC_CSSM

Version 1.0

2017-05-02

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 1

Not yet available.

KBE 50-2

Removal

C-SC_CSSM

Version 1.0

2016-05-20

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 9

Removing the container

NOTE:

Fluid may be present in the container.

Drain the container (2) before removal.

1. Remove the hose (1) from the hose socket.

2. Remove the container (2).

KBE 50-2

Removal

C-SC_CSSM

Version 1.0

2016-05-20

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 9

Removing the connecting cable

1. Unscrew the two screws (1).

2. Remove the lower part of the cover (2).

3. Unscrew the screw (3).

4. Remove the cable clamping piece (4).

5. Unscrew the two screws (5).

6. Remove the upper part of the cover (6).

7. Remove the two strands (7).

Tools:

- Torx T15

KBE 50-2

Removal

C-SC_CSSM

Version 1.0

2016-05-20

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 9

Removing the drill motor [applies to: KBM 50-2; KBM 50-2M]

1. Unscrew the flat headed screw (1).

Crushing hazard around drill motor!

The drill motor will rapidly slide downwards once the two screws (2) have been loosened.

First move the drill motor downwards and then unscrew the two screws (2).

2. Move the drill motor downwards by turning the spider.

3. Unscrew the two screws (2).

4. Slide the drill motor (3) out of the guide.

Tools:

- Slotted screwdriver

- Socket head wrench,

6 mm

KBE 50-2

Removal

C-SC_CSSM

Version 1.0

2016-05-20

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 9

Removing the carbon brush holders (on both sides)

1. Lift up the spring (1).

2. Remove the carbon brush (2).

3. Pull off the plug (3).

4. Remove the carbon brush holder (4).

5. Remove the cable (5).

Tools:

- Assembly aid

- Long-nosed pliers

KBE 50-2

Removal

C-SC_CSSM

Version 1.0

2016-05-20

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 9

Removing the motor housing

1. Unscrew the four screws (1).

2. Remove the motor (2).

Tools:

- Socket head wrench,

5 mm

Inhaltsverzeichnis

Andere Fein Industrieanlagen Handbücher

Fein

Fein GRIT GIR Bedienungsanleitung

Fein

Fein AGSZ18-280 BL Bedienungsanleitung

Fein

Fein Grit GXE Series Bedienungsanleitung

Fein

Fein Grit GIC Series Bedienungsanleitung

Fein

Fein GRIT GI 75 Bedienungsanleitung

Fein

Fein KBM 50 Q Einrichtungshandbuch

Fein

Fein GRIT GIE Series Bedienungsanleitung

Fein

Fein JCM 200QX Bedienungsanleitung

Fein

Fein GBA 18V Bedienungsanleitung

Fein

Fein Grit GX75 Series Bedienungsanleitung

Fein

Fein GRIT GHB 15-50 120 V Bedienungsanleitung

Fein

Fein GRIT GXR Series Bedienungsanleitung

Fein

Fein RS17-70E Series Bedienungsanleitung

Fein

Fein RSG Ex 1500 A Series Bedienungsanleitung

Fein

Fein Grit GX75 Series Bedienungsanleitung

Fein

Fein RSG 18a Einrichtungshandbuch

Fein

Fein FRIT GIB Bedienungsanleitung

Fein

Fein VersaMAG VISE Bedienungsanleitung

Fein

Fein KBE 50-2M Series Einrichtungshandbuch

Fein

Fein GRIT GIXS Bedienungsanleitung

Fein

Fein GRIT GI100 Bedienungsanleitung

Fein

Fein GRIT GIMS75 Bedienungsanleitung

Fein

Fein GRIT GIL Series Bedienungsanleitung

Fein

Fein KBC 36 MAGFORCE Bedienungsanleitung

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung