Fein VersaMAG VISE Series Bedienungsanleitung

VersaMAG VISE (**) 9 07 01 ...

VersaMAG (**) 3 21 72 ...

3 41 01 372 21 0 2023-01-30

English (en)

Français (fr)

Español (es)

Instruction Manual

Mode d’emploi

Instrucciones de uso

For your safety.

Read all safety warnings and

all instructions. Failure to

follow the warnings and instructions may

result in serious injury.

Save all safety warnings and instructions for

future reference.

Do not use this product before you

have thoroughly read and completely

understood this Instruction Manual. The

documents mentioned should be kept for

later use and enclosed with the product,

should it be passed on or sold.

Please also observe the relevant national

industrial safety regulations.

Safety instructions.

Keep work area clean and well lit. Cluttered

or dark work areas invite accidents.

Wear suitable clothing. Do not wear loose

clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose

clothes, jewelry or long hair can be caught in

moving parts.

Always secure the Product with the supplied

safety strap. Keep bystanders away while

using the product.

Always clamp workpieces with sufficient

clamping force. A workpiece not securely

fastened can come loose and cause injuries.

The spindle of the vise must not be driven

with electric tools.

Keep the magnet away from persons with

cardiac pacemakers.

Use the magnet only at an ambient temper-

ature between –15 °C and +45 °C.

Do not rivet or screw any name-plates or

signs onto the product. This can result in

damage to the magnets.

Do not use accessories that have not been

especially developed or approved by FEIN.

Transport.

Air freight

Magnetic fields from improperly packaged

magnets could affect aircraft navigation

equipment. In the worst case, this can lead

to an accident.

For air transport, only dispatch magnets in

packaging with sufficient magnetic shielding.

Observe the relevant regulations.

WARNING

4en

Intended Use.

Permanent magnet with vise for:

–clamping of various materials for machin-

ing with hand-guided tools and drill

presses

–positioning on magnetizable, clean, rust-

free, coating-free and ice-free flat materi-

als of 4 mm thickness upward

in workshops and mobile on construction

sites in weather-protected environments

using the attachments and accessories devel-

oped and recommended by FEIN. Use only

with firm footing.

All other types of use are considered as not

intended for.

This product is not intended for continuous

everyday use.

The operator is solely liable for any damage

caused by use not as intended for.

Foreseeable improper use

For safe operation of the product and to

exclude misuse, the following is prohibited:

–Unauthorized modifications

–Drilling holes in the product and the

permanent magnet

–Improper use, particularly (but not

exclusively) for:

— use of non-approved attachments,

— use as a lifting magnet,

— use as a step or a handle to assist

climbing,

— use in machine tools such as milling

machines.

–Non-observance of the operating

instructions.

Symbols.

Symbol, character Explanation

Make sure to read the enclosed documents such as the

Instruction Manual and the General Safety Instructions.

Observe the instructions in the text or graphic opposite!

Warning against hand injuries!

Do not use magnet near cardiac pacemakers. The magnet

generates a field that can impair the function of cardiac pace-

makers.

Warning against magnetic field! Keep the magnet away from

magnetic data medium and magnetically-sensitive equipment.

The effect of the magnets can lead to irreversible data loss.

Warning against falling objects!

This sign warns of a directly imminent, dangerous situation. A

false reaction can cause a severe or fatal injury.

This sign indicates a possible dangerous situation that could

cause severe or fatal injury.

This sign warns of a possible dangerous situation that could

cause injury.

Magnetic holding power sufficient depending on application

Magnetic holding power, insufficient

(**) may contain numbers and letters

DANGER

WARNING

CAUTION

Character Unit Explanation

°F Allowable ambient temperature

lbs Mass

lin Length, width, height, depth, diameter or thread

m, s, kg, A, mm, V, W,

Hz, N, °C, dB, min, m/s2Basic and derived units of measurement from the

international system of units SI.

6en

Technical description and specifications.

The delivery scope of your product may include only a part of the accessories described or

shown in this Instruction Manual.

Magnetic foot

Vise

Crank

Crank rod

Hand lever, magnet

Clamping jaws

Spirit level

Permanent magnet

Fig. 1

Type VersaMAG VISE (**)

VersaMAG (**)

Order number 9 07 01 ...

3 21 72 ...

Weight of permanent magnet with vise according

to EPTA-Procedure 01 15.93 lbs

7.23 kg

Weight of permanent magnet without vise

according to EPTA-Procedure 01 8.29 lbs

3.76 kg

Weight of permanent magnet with welding plate

according to EPTA-Procedure 01 (optional) 19.51 lbs

8.85 kg

Maximum clamping width of the vise 4 1/4 in

108 mm

Allowable ambient temperature 5 °F ... 113 °F

–15 °C ... +45 °C

Working instructions.

For switching the magnet ON

(figure 2).

Before carrying out any work with the prod-

uct, check that the clamping screws are tight.

Keep bystanders away while using the prod-

uct.

Clamp and machine workpieces only when

the lever position is set to ON.

Pay attention that the set-up surface for

the magnetic foot is flat, clean, rust-free

and ice-free. Remove varnish, putty/filler

layers and other materials. Prevent an air gap

between the magnetic foot and the set-up

surface. The air gap reduces the magnetic

holding power.

Do not use this product on hot surfaces

> 80 °C, as this will result in a permanent

reduction of the magnet holding power.

Use the magnet only on magnetic surfaces

with a wall thickness of at least 4 mm.

The magnetic holding power can be

switched step by step with the hand lever.

For positioning, set the hand lever to 30%;

to switch the magnet on, set the hand lever

to ON.

Use personal protective equipment accord-

ing to the application.

Hand lever, magnet

Fig. 2

≥ 4 mm

2. 1.

30%

8en

Fastening the measuring tool safety

strap (figure 3).

Always secure the product with the supplied

safety strap.

Switching off the magnetization

(figure 4).

Slide the handle-lever sleeve upward.

Set the hand lever to OFF.

The handle-lever sleeve automatically

retracts back to the starting position.

Corrective Action.

Safety strap

Fig. 3

Fig. 4

OFF

Hand lever, magnet

Malfunction Meaning Corrective action

The movable clamping jaw

cannot be moved. Clamping a work-

piece is not possible. Check the seating of the screws on the

bottom side of the clamping jaw. In

this case, reduce the tightening torque

of the two screws.

Lubricate the two sliding surfaces of

the vise regularly.

The magnetic holding

power is strongly reduced. The magnet is defec-

tive. Please refer to a FEIN customer ser-

vice agent.

Assembly instructions.

Spirit level (figure 5).

A spirit level is supplied with the product; it

can be used, for example, to check the align-

ment of a workpiece.

Fig. 5

Spirit level

10 en

Fastening the vise to the permanent

magnet (figure 6).

Slide the vise onto the permanent magnet

until the fastening bracket engages over the

fastening bolt.

Tighten the hexagon socket screws.

Fig. 6 1.

Click

3 mm

(1,5 Nm)

2 x

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Fein Werkzeuge Handbücher

Fein

Fein ASW 18-6 Bedienungsanleitung

Fein

Fein SuperCut Bedienungsanleitung

Fein

Fein ABLK 1.3E/TSE Einrichtungshandbuch

Fein

Fein BLK3.5E Bedienungsanleitung

Fein

Fein WPO 13-15 E Bedienungsanleitung

Fein

Fein BLK1.3CS Bedienungsanleitung

Fein

Fein AKFH18-5 Series Bedienungsanleitung

Fein

Fein MULTIMASTER FMM 250 Bedienungsanleitung

Fein

Fein AKBU 35 PMQ AS Bedienungsanleitung

Fein

Fein RS17-70E Series Einrichtungshandbuch

Fein

Fein ABLK18-1.3CSE Bedienungsanleitung

Fein

Fein MShyo840-1b Bedienungsanleitung

Fein

Fein BF10-280ET Bedienungsanleitung

Fein

Fein AGSZ 18-280 BL SELECT Einrichtungshandbuch

Fein

Fein GRIT GIS75 Series Bedienungsanleitung

Fein

Fein KBE 36 MAGSPEED Bedienungsanleitung

Fein

Fein AMM 300 Plus Bedienungsanleitung

Fein

Fein AKP18-600AS Series Bedienungsanleitung

Fein

Fein 9 01 04 003 01 1 Bedienungsanleitung

Fein

Fein FSC500QSL Einrichtungshandbuch

Fein

Fein ASCD 12-150 W4 Einrichtungshandbuch

Fein

Fein FMT 250QSL Bedienungsanleitung

Fein

Fein BOP6 Bedienungsanleitung

Fein

Fein GSZ4-280EL Gebrauchsanweisung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung