Fenix FD41 Bedienungsanleitung

Fenix FD41 Flashlight

Technical Parameters

ANSI/PLATO FL1

General Mode

Strobe

Turbo

High

Med

Low

Output

900

Lumens

350

Lumens

150

Lumens

900

Lumens

Runtime

1h 40min*

3h 50min*

10h 15min

150h

Distance

Spotlight

340m

218m

141m

37m

Floodlight

47m

30m

20m

Intensity

Spotlight

29,000cd

12,000cd

5,000cd

350cd

Floodlight

560cd

230cd

100cd

9cd

Impact Resistance

Waterproof

IP68, underwater 2m

Notice: The above-mentioned parameters (lab-tested by using Fenix 3.6V/3500mAh 18650

rechargeable Li-ion battery) may vary between flashlights, batteries and environment.

*Due to the dual overheat protection; the runtime of Turbo is estimated.

Uses Cree XP-L HI LED with a lifespan of 50,000 hours

Powered by one 18650 rechargeable Li-ion battery or two CR123A batteries

146mm Length x 25.4mm Body Diameter x 40mm Head Diameter

160 grams (excluding battery)

360°rotary focusing technology

Digitally regulated output maintains constant brightness

Reverse polarity protection, to protect from improper battery insertion

Intelligent overheat protection to avoid high surface temperature

Tactical tail switch for momentary on and constant activation

Functional side switch for output selection

Made of durable aircraft-grade aluminum

Premium type Ⅲhard-anodized anti-abrasive finish

High efficiency lens with total reflective coating

Operation Instruction

The tail cap switch is the tactical switch, and the side button switch is the functional switch.

ON/OFF

Tap the tactical switch to turn on the light momentarily, release it and the light will go out.

Fully press the tactical switch to turn on the light constantly, press once again to switch off the

light.

Output Selection

With the light on, single clicking the functional switch continually, the light will cycle through

Turbo→Low→Med→High.

Strobe

With the light on, press and hold the functional switch for 0.5 seconds to activate Strobe; with

another single click the light will return to previously used General brightness level.

Spotlight and Floodlight Adjustment

The factory default will be total floodlight. Rotate the focusing ring to regulate the lens focus,

thus changing between spotlight and floodlight.

Intelligent Memory Circuit

The flashlight memorizes the last brightness level used in the General mode. The next time it is

turned on, it will recall the previously used General brightness level.

Dual-protection Function

Time control: The light will downshift from Turbo to High after 5 working minutes.

Heat control: The light will accumulate a lot of heat when used at Turbo output level for

extended periods. When the light reaches a temperature of 55℃or above, it will automatically

step down by a few lumens to reduce temperature. When the temperature is reduced, the

output will gradually return.

Low-voltage Downshift Function

When the voltage level drops below the preset level, the flashlight is programmed to downshift

to lower brightness levels until Low output is reached. When this happens in Low output mode,

the flashlight blinks three times every five minutes to remind you to charge the light or replace

the battery. To ensure normal use, the flashlight will not turn off and will work until the

over-discharge function stops the battery from working.

Battery Specifications

Type

Dimensions

Nominal Voltage

Usability

Fenix ARB-L18 Series

18650

3.6V/3.7V

Recommended

√√

Fenix ARB-L2 Series

18650

3.6V/3.7V

Recommended

√√

Non-rechargeable Battery

(Lithium)

CR123A

Usable

√

Rechargeable Battery

(Li-ion)

18650

3.6V/3.7V

Caution*

！

Rechargeable Battery

(Li-ion)

16340

3.6V/3.7V

Caution*

！

Rechargeable Battery

(LiFePO4)

18650

3.2V

Banned

*Li-ion batteries are powerful cells designed for commercial applications and must be treated

with caution and handled with care. Quality batteries with circuit protection will reduce the

potential for combustion or explosion but cell damage or short circuiting are potential risks the

user assumes.

Battery Replacement

Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then

screw the tail cap back on.

Usage and Maintenance

Disassembling the sealed head can cause damage to the light and will void the warranty.

Fenix recommends using excellent quality battery. If the light will not be used for an

extended period, remove the battery, or the light could be damaged by electrolyte leakage

or battery explosion.

Continuous usage at Turbo brightness level in hot or poor heat dissipation environment, the

light may activate overheat protection or light beam trembling. To maintain normal usage,

please lower brightness level to cool down the flashlight.

Long-term use can result in O-ring wear. To maintain a proper watertight seal, replace the

ring with an approved spare．

Periodic cleaning of the battery contacts improves the lamp's performance as dirty contacts

may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following

reasons:

A: The battery needs replacing.

Solution: Replace battery (Ensure battery is inserted according to the manufacturer’s

specifications).

B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please refer to the warranty policy before contacting your

authorized distributor.

Warning

The flashlight is a high-intensity lighting device capable of causing eye damage to the user or

others. Avoid shining the flashlight directly into anyone’s eyes.

Inhaltsverzeichnis

Andere Fenix Taschenlampe Handbücher

Fenix

Fenix RC15 Bedienungsanleitung

Fenix

Fenix LR50R Bedienungsanleitung

Fenix

Fenix TK15 Bedienungsanleitung

Fenix

Fenix HL30 Bedienungsanleitung

Fenix

Fenix LD12 Bedienungsanleitung

Fenix

Fenix ARB-L21 Series Bedienungsanleitung

Fenix

Fenix UC30 2017 Bedienungsanleitung

Fenix

Fenix RC09 Bedienungsanleitung

Fenix

Fenix TK70 Bedienungsanleitung

Fenix

Fenix E-CP Bedienungsanleitung

Fenix

Fenix TK45 Bedienungsanleitung

Fenix

Fenix TK35 Bedienungsanleitung

Fenix

Fenix LD05 Bedienungsanleitung

Fenix

Fenix TK16 V2.0 Bedienungsanleitung

Fenix

Fenix E LITE Bedienungsanleitung

Fenix

Fenix LD10 Bedienungsanleitung

Fenix

Fenix WT16R Betriebsanleitung

Fenix

Fenix C7 Bedienungsanleitung

Fenix

Fenix UC52 Bedienungsanleitung

Fenix

Fenix TK12 Bedienungsanleitung

Fenix

Fenix PD40R Bedienungsanleitung

Fenix

Fenix FD30 Technisches Handbuch

Fenix

Fenix E25 Bedienungsanleitung

Fenix

Fenix PD35TAC Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung