Fenix TK32 Bedienungsanleitung

Fenix TK32 Flashlight User Manual

400 meters (437 yards) from a palm sized light? No, you are not mistaken. The TK32

Flashlight drives deep downrange to 400 meters with 900 lumen output. Balanced for

easy carry, the light also features red, green and blue LEDs and the dual tail switch

system is all you need to control this multi color flashlight.

Technical Parameters

ANSI/NEMA

FL1

Turbo High Mid Low

UTPUT 900

lumens

400

Lumens

130

Lumens

RUNTIME 1h30min 3h45min 13h 150h

DISTANCE 400m（Max）

INTENSITY 40000cd（Max）

IMPACT

RESISTANT

WATER

RESISTANT

IPX 8 ( 2 meters underwater)

ACCESS RIES Holster, lanyard and spare O ring

Notice: The above mentioned parameters (lab tested by Fenix using ARB L2S 18650 Li

ion battery) are approximate and may vary between flashlights, batteries and

environments.

The flashlight will drop down into the high brightness level after working about 15 minutes

in the Turbo mode. Therefore, the runtime of Turbo output is an accumulated time.

● Utilizes Cree XM L2 (U2) LED with a lifespan of 50,000 hours

● Integrated Red, Green and Blue LEDs with 100mW output

● Uses one 18650 rechargeable Li ion battery or two CR123A batteries

● 159 mm (Length) × 25.4 mm (Body Diameter) × 52mm (Head Diameter)

● 180 gram weight (excluding batteries)

● Digitally regulated output maintains constant brightness

● Low voltage warning function to remind users of low power

● Reverse polarity protection to protect from improper battery installation

● Anti roll, slip resistant body design

● Dual tail switch for momentary on and output selection

● Made of durable aircraft grade aluminum

● Premium Type III hard anodized anti abrasive finish

● Toughened ultra clear glass lens with anti reflective coating

peration

Momentary-on

Slightly press and hold the TK32’s tail power switch.

Constant-on

Fully press the tail power switch to turn the light on, pressing again to turn the light off.

utput selection

When the light is on, press the tail mode switch to cycle through four brightness levels in

the order of Turbo>Low>Mid>High

Colored LEDs

When the light is on, press and hold the mode switch for one second to light up the

colored LEDs. Press the mode switch to cycle through them in the order of

Red>Green>Blue. Press and hold the mode switch for one second to return to white light.

Instant access to red light

When the light is off, press and hold the mode switch to activate the red light momentarily

Intelligent memory circuit

White light

The flashlight memorizes the last used output of white light. The next time you turn the

flashlight on; it will activate the last used brightness level of white light.

Colored LEDs

The flashlight memorizes the last used colored LED. The next time you switch from the

white light to colored light, it will activate the last used color .

ver-heat Protection:

TK32 will accumulate a lot of heat when it is working in Turbo output. To avoid

overheating, the flashlight will automatically drop down into the High brightness level after

working in Turbo output for 15 minutes. If the non stop Turbo output is needed, just reset

it again.

Low-voltage Warning Function

When the voltage level drops below the preset level, the flashlight will downshift to a

lower brightness level. When the voltage level drops below the threshold voltage in Low

output mode, the flashlight will blink three times every five minutes to remind you to

replace the battery.

Battery Specifications

Type Dimensions Nominal

voltage

Usability

FENIX ARB L2 Series 18650 3.7V/3.6V Recommend

√

Non rechargeable

Battery

(Lithium)

CR123A 3V Recommend

√

Rechargeable Battery

(Li ion)

16340 3.7V/3.6V Cautious* !

Rechargeable Battery

(Li ion)

18650 3.7V/3.6V Cautious* !

Rechargeable Battery

（LiFePO4）

16340 3.2V Usable √

Rechargeable Battery

（LiFePO4）

18650 3.2V Usable √

Warning: Please do not mix batteries of different brands, size, capacity or type. Doing so

may cause damage to the flashlight or the batteries being used.

*18650 /16340 Li ion batteries are powerful cells designed for commercial applications

and must be treated with caution and handled with care. Quality batteries with circuit

protection will reduce the potential risk for combustion or explosion but cell damage or

short circuiting are potential risks the user assumes.

Battery Replacement

Unscrew the tail cap to insert the batteries with the anode side (+) toward the light's

head, then align the threads and screw the tail cap back on.

Usage and Maintenance

◎Please don't disassemble the sealed head, doing so can cause damage to the

flashlight and will void the warranty.

◎We recommend the use of high quality battery. If the flashlight is not to be used for an

extended period, remove the battery, or the flashlight could be damaged by electrolyte

leakage or battery explosion.

◎Due to the momentary on tactical switch, the flashlight may be accidentally activated

when stored, transported or placed in a pocket. Unscrew the tail cap one half turn or take

out the battery to avoid unwanted operation.

◎The o ring may be worn out after using for a long time. If this happens, please replace

the o ring with a new one to keep the flashlight properly sealed against water.

◎Please clean the contacts of your light from time to time, especially if the light flickers

or doesn't light up. There may be several reasons for a flickering or not working light:

Reason A: The battery needs replacing.

Solution: Replace the battery (Please confirm the correct installation of anode and

cathode).

Reason B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with an alcohol soaked cotton swab.

If the above methods don't work, please refer to the warranty policy.

Product Warranty

We will replace products with manufacturing defects within 15 days of purchase and

repair a light free of charge within 24 months of purchase if problems develop with

normal use; if repair is required after 24 months from the date of purchase, we will charge

for parts. The total repair fee is dictated by the cost of the replaced materials.

Product Registration

We kindly suggest that you register your product on the official website of Fenixlight

Limited (www.fenixlight.com). You’ll receive an extra six months of warranty coverage

once you have successfully registered. By participating in an optional customer survey,

you are entered in a drawing for free Fenix products.

Warning

TK32 is a high intensity lighting device capable of causing eye damage. Avoid shining the

light directly into anyone’s eyes.

FENIXLIGHT LIMITED

Tel: +86 755 29631163/83/93 Fax: +86 755 29631181

http:www.fenixlight.com

E mail:info@fenixlight.com

Address: 8/F, 2nd Building, Dong Fang Ming

Industrial Center, 33rd District, Bao' an,

Shenzhen 518133, China

Inhaltsverzeichnis

Andere Fenix Taschenlampe Handbücher

Fenix

Fenix PD20 Bedienungsanleitung

Fenix

Fenix TK20R Bedienungsanleitung

Fenix

Fenix TK72R Bedienungsanleitung

Fenix

Fenix FD30 Technisches Handbuch

Fenix

Fenix LD22 Bedienungsanleitung

Fenix

Fenix TK45 Bedienungsanleitung

Fenix

Fenix TK41 Bedienungsanleitung

Fenix

Fenix LD41 Bedienungsanleitung

Fenix

Fenix C7 Bedienungsanleitung

Fenix

Fenix ARB-L21 Series Bedienungsanleitung

Fenix

Fenix TK28 TAC Bedienungsanleitung

Fenix

Fenix TK70 Bedienungsanleitung

Fenix

Fenix E-SPARK Bedienungsanleitung

Fenix

Fenix PD35TAC Bedienungsanleitung

Fenix

Fenix RC09 Bedienungsanleitung

Fenix

Fenix LD32 Bedienungsanleitung

Fenix

Fenix FD41 Bedienungsanleitung

Fenix

Fenix UC52 Bedienungsanleitung

Fenix

Fenix UC30 2017 Bedienungsanleitung

Fenix

Fenix LD05 Bedienungsanleitung

Fenix

Fenix LD12 Bedienungsanleitung

Fenix

Fenix PD40R Bedienungsanleitung

Fenix

Fenix E LITE Bedienungsanleitung

Fenix

Fenix TK26R Bedienungsanleitung

Beliebte Taschenlampe Handbücher anderer Marken

StreamLight

StreamLight PROPOLYMER 2AA Bedienungsanleitung

StreamLight

StreamLight Stinger Bedienungsanleitung

Silverline

Silverline 994024 Bedienungsanleitung

Gama Sonic

Gama Sonic 23i60065 Bedienungsanleitung

Ryobi

Ryobi RFL180M Bedienungsanleitung

RIB

RIB SPARK ACG7061 Bedienungsanleitung

Abicor Binzel

Abicor Binzel MB EVO PRO Series Bedienungsanleitung

PELI

PELI 7610 Bedienungsanleitung

Black & Decker

Black & Decker FSL18 Bedienungsanleitung

Black & Decker

Black & Decker 9506 Bedienungsanleitung

Berner

Berner 341709 Bedienungsanleitung

PELI

PELI 3415 Zone 0 Bedienungsanleitung

ADC

ADC Adlite Pro Wartungshandbuch

Fervi

Fervi 0338 Bedienungsanleitung

Milwaukee

Milwaukee M18 IL Bedienungsanleitung

Spectronics

Spectronics Spectroline LeakTracker SPI-LT Bedienungsanleitung

Larson Electronics

Larson Electronics SLEDB-110V-M Bedienungsanleitung

vulta

vulta hurricane 262 lumen fg-e15 Bedienungsanleitung