Festo SBOC-M-R1B-H Bedienungsanleitung
Description
Electronics
Description
Compact Vision
System
SBOC-M-R1B-H
Description
8001260
en 1602a
[8059462]
Compact Vision System
Contents and general instructions
I
Festo GDCS-SBOC-EN en 1602a
Original de.......................................
Version en 1602a..................................
Designation GDCS-SBOC-EN........................
Order no. 8001260.................................
(Festo AG & Co. KG, D‐73726 Esslingen, 2012)
Internet: http://www.festo.com
E-Mail: service_international@festo.com
Reproduction, distribution or sale of this document or com
munication of its contents to others without express au
thorization is prohibited. Offenders will be liable for dam
ages. All rights reserved in the event that a patent, utility
model or design patent is registered.
Contents and general instructions
II Festo GDCS-SBOC-EN en 1602a
Trademarks
Harax ®is a registered trade mark of HARTING Electronics
GmbH & Co. KG
Harting RJ Industrial ®is a registered trade mark of HARTING Electronics
GmbH & Co. KG
Contents and general instructions
III
Festo GDCS-SBOC-EN en 1602a
Intended use V..........................................................
Range of application and certifications VI.....................................
Safety instructions VII.....................................................
Service VIII...............................................................
Target group VIII..........................................................
Important user instructions IX..............................................
Instructions on this description XI...........................................
Product-specific terms and abbreviations XII...................................
1. System overview 1-1...............................................
1.1 Structure of the Compact Vision System type SBOC-M-R1B-H 1-3...........
1.2 Characteristics 1-5.................................................
1.2.1 Mode of operation 1-6.......................................
1.2.2 Display and connecting elements 1-7...........................
1.3 FCT software (functional overview) 1-9.................................
1.4 Lens selection 1-10..................................................
2. Mounting 2-1.....................................................
2.1 Mounting 2-3......................................................
2.1.1 Dimensions of the Compact Vision System SBOC-M-R1B-H 2-4......
2.1.2 Mounting the Compact Vision System 2-4.......................
2.1.3 Attachment with adapter kit type SBOA-HMSV-39 2-5.............
2.1.4 Mounting/dismantling of lens and protective tubing 2-6...........
3. Installation 3-1...................................................
3.1 General installation instructions 3-3...................................
3.1.1 Selection of the power supply unit 3-5..........................
3.2 Electrical connections 3-6...........................................
3.2.1 Connection of the operating voltage supply and the I/Os 3-6.......
3.2.2 Connecting the Ethernet interface 3-10..........................
4. Commissioning 4-1................................................
4.1 Notes on commissioning 4-3.........................................
4.1.1 Installing and starting the FCT 4-3.............................
Contents and general instructions
IV Festo GDCS-SBOC-EN en 1602a
4.1.2 Steps for commissioning 4-4..................................
4.2 Addressing in the Ethernet (basic principles) 4-6.........................
4.3 Instructions for use of a firewall 4-9...................................
4.4 Making network settings with the Compact Vision System 4-10..............
4.5 Instructions on operation 4-13.........................................
4.5.1 Setting the optics 4-14.......................................
4.5.2 Trigger signal 4-16...........................................
5. Diagnostics and error handling 5-1...................................
5.1 General diagnostics options 5-3......................................
5.1.1 Status display 5-3..........................................
5.1.2 Error elimination 5-6........................................
A. Technical appendix A-1.............................................
A.1 Cleaning and maintenance A-3.......................................
A.2 Accessories (at press time) A-4.......................................
A.3 Siemens star A-5...................................................
A.4 Technical data A-6..................................................
B. Index B-1.........................................................
B.1 Index B-3.........................................................
Contents and general instructions
V
Festo GDCS-SBOC-EN en 1602a
Intended use
The Compact Vision System SBOC-M-R1B-H has been
designed for installation in a machine or an automated
system. It serves to visualize and diagnose fast motion
sequences.
The device is intended for use in an industrial environment.
Measures may need to be implemented in residential areas
for interference suppression.
The Compact Vision System SBOC-M-R1B-H may only be used
as follows:
– only in an industrial environment
– as intended
– in original status without unauthorised modifications.
Only the conversions or modifications described in the
documentation supplied with the product are permitted.
– in excellent technical condition.
If conventional accessory components such as sensors and
actuators are connected, the specified limits for pressures,
temperatures, electrical data, torques, etc. must not be ex
ceeded.
Take into consideration the regulations applicable for the
destination, as well as:
– regulations and standards
– regulations of the testing organizations and insurers
– national regulations.
Contents and general instructions
VI Festo GDCS-SBOC-EN en 1602a
Range of application and certifications
The product fulfils the requirements of EU directives and is
marked with the CE marking.
Standards and test values, which the product complies with
and fulfils, can be found in the Technical data section. The
product-relevant EU directive can be found in the declaration
of conformity.
Contents and general instructions
VII
Festo GDCS-SBOC-EN en 1602a
Safety instructions
Caution
During commissioning and programming, the safety regu
lations listed in this manual and in the documentation for
the controller and the other components used must always
be observed.
The user must ensure that nobody has access to the
sphere of influence of the connected actuators. Access to
the possible danger zone must be prevented by suitable
measures, such as protective screens and warning signs.
Caution
Electrostatically sensitive devices! Electrostatic discharges
can damage the internal electronics.
Do not open the housing. Observe the handling specific
ations for electrostatically sensitive devices.
Caution
If the permissible temperature range is exceeded, e.g. due
to powerful external sources of light, this can lead to sys
tem errors and cause damage.
Mount the Compact Vision System in a well ventilated
location, especially screened from the heat emitted by
other devices and from sources of light.
Contents and general instructions
VIII Festo GDCS-SBOC-EN en 1602a
Note
A dirty and scratched lens or a dirty and scratched protect
ive disc can lead to optical errors. Make sure that the lens
and the protective disc are not scratched. Do not use any
abrasive cleaning agents.
Clean the lens and protective disc if they are dirty or there
are deposits on them:
with an air gun or with clean non-lubricated compressed
air
with a soft moist cloth and non-abrasive cleaning agents.
Service
Please consult your local Festo repair service if you have any
technical problems.
Target group
This description is intended exclusively for technicians
trained in control and automation technology who have ex
perience in installing and commissioning electronic systems.
Inhaltsverzeichnis
Andere Festo Bildverarbeitungssystem Handbücher
Beliebte Bildverarbeitungssystem Handbücher anderer Marken
Banner
Banner VE200G1B Bedienungsanleitung
SVS-Vistek
SVS-Vistek CoaxPress EoSens Creation 1.1CXP2 Bedienungsanleitung
Sony
Sony Vision Exchange PEQ-C100 Bedienungsanleitung
Datalogic
Datalogic MX-U81 Montageanleitung
Cognex
Cognex In-Sight D900 Series Bedienungsanleitung
Spektrum
Spektrum SPMVR2520 Bedienungsanleitung
Huaray
Huaray Movidius Series Bedienungsanleitung
Daheng Imaging
Daheng Imaging MERCURY2 USB3 Bedienungsanleitung
SVS-Vistek
SVS-Vistek exo174 U3 Series Bedienungsanleitung
Teledyne
Teledyne e2v Eliixa+ Series Bedienungsanleitung
Photron
Photron FASTCAM Mini CX Series Bedienungsanleitung
National Instruments
National Instruments Vision CVS-1455 Bedienungsanleitung
