FIC PTM800Pro Bedienungsanleitung

PTM800Pro

MAINBOARD

MANUAL

DOC No. : M0590040

Rev. : A0

Date : 3, 2006

Part No. : 25-13031-00

PTM800Pro Mainboard Manual Table of Contents

Chapter 1. Overview .......................................................... 1-2

Package Checklist...........................................................................1-3

The PTM800Pro Mainboard............................................................1-4

Main Features ..................................................................................1-5

Chapter 2. Installation Procedures ................................... 2-1

1.) Set System Jumpers..................................................................2-2

2). Install Memory Modules ............................................................2-3

3). Install the CPU............................................................................2-3

4). Install Expansion Cards ............................................................2-6

5). Connect Devices ........................................................................2-7

Chapter 3. BIOS Setup....................................................... 3-1

CMOS Setup Utility .........................................................................3-1

Standard CMOS Setup....................................................................3-2

Advanced BIOS Features ...............................................................3-4

Advanced Chipset Features...........................................................3-5

Integrated Peripherals ....................................................................3-6

Power Management Setup .............................................................3-8

PC Health Status ...........................................................................3-10

Frequency/Voltage Control ..........................................................3-11

Load Optimized Defaults ..............................................................3-12

Supervisor/User Password ..........................................................3-12

Save and Exit Setup......................................................................3-12

Exit without Saving .......................................................................3-12

PTM800Pro Mainboard Manual

1-2

  

Overview

The new microATX, 1stMainboardR supports a full range of IntelR CeleronR D and

PentiumR 4 processors. The leading edge VIAR PM800Pro/ 8237RPlus chipset was

designed for coworking with CeleronR D and PentiumR 4 based on the VRM 10.0

spec and 533/800 MHz. Two DDRII 400/533 SDRAM sockets allow for up to 2 GB

memory capacity. Support for the Ultra DMA / 133 protocol and its high-speed

interface further ensures that data transfer speeds are improved, especially for long

sequential transfers required by audio / visual applications.

The board features onboard audio and LAN function; also, the serial ATA feature

replaces the standard parallel ATA physical storage interface and allows future

enhancements to the computing platform. It completely software compatible with

parallel ATA, requiring no modification to your operating system. For more detail,

please read the help file in the 1st Utilities CD.

The 1stMainboard comes with a versatile range of I / O features such as 1 COM port

and 1 CRT port, 1 parallel port, 1 LAN, 2 optional IEEE 1394, 1 PS / 2 mouse and

keyboard connector, 8 USB 2.0 ports, 1 media connector (front audio, Line-in,

Line-out and Mic-in). In addition, the board is equipped with 2 dual channel

enhanced PCI bus master IDE connectors. Ample expansion is available through

1AGP (8X) and 3 PCI slots to meet the requirement for enjoying the P4 CPU benefits

in internet applications, video/3D graphics performance, and so forth.

Other key features are Remote On/Off, Auto Power Failure Recovery, integrated

temperature monitoring and system fan control. Included also is 1st Utilities CD with

enhanced drivers and a few bundled software solutions.

PTM800Pro Mainboard Manual

1- 3

Package Checklist

If you discover any item below was damaged or lost, please contact your

vendor.

1394 Bracket

with Cable

(optional)

Mainboard

I/O Shielding

Manual Drivers

Floppy Drive

Cable

USB Cable

IDE Cable

SATA Power Cable (top)

SATA Data Cable (bottom)

(optional)



Please install it immediately after your Windows operating system

installation is complete. Place your 1st Utilities CD in the drive and an

operating menu will appear on your monitor. Please select Auto

Installation. It will automatically detect which software tools (patch files,

drivers) the mainboard needs. Press OK to go through the whole

installation procedure in a very straight forward and easy way. It will

also provide you with a custom installation feature to select the patch

files and software drivers you want for the onboard chip’s use. The top

menu of the 1st Utilities CD lists all the functions that are allowed

by this board.

(optional)

NOTE: A 1st Utilities CD, which contains patch files, onboard

video/audio chip drivers, related online help and other useful

information, can be found in your mainboard package.

PTM800Pro Mainboard Manual

1-4

The PTM800Pro Mainboard

PTM800Pro Mainboard Manual

1- 5

Main Features





CPU

Celeron D

300 Series

2.4 to 3.33 GHz and up * (FSB 533)

Pentium 4

500 Series

3.0 to 3.8 GHz and up* (FSB 800)

600 Series

3.0 to 3.8 GHz and up* (FSB 800)





Chipset

North Bridge: VIA® P4M800 Pro

South Bridge: VIA® 8237R Plus





Memory

2 Memory Sockets:

Support DDRII 400/533 MHz

total Memory Size up to 2 GBs





Expansion Slots

1 AGP Slot: Support 2.0 4X/8X (0.8 - 1.5V)

3 PCI Slots





IDE Connections

2 IDE Connectors - PIO Mode, Ultra DMA 66/100/133

Up to 4 Devices





SATA Connections

2 Ports Controlled by embedded VT8237R Plus ® SATA Function

PTM800Pro Mainboard Manual

1-6





Audio Features

ALC653 (5.1 Audio Channel)

AC97 2.3 compliant

LINE_IN, LINE_OUT, MICROPHONE_IN Jack

Front audio pinheaders





I/O Ports

2 IDE connectors -

PIO, Bus Master, Ultra DMA 66/100/133

up to 4 devices

-1 CRT port

-1 serial port COM1

1 parallel port

1 PS/2 mouse and 1 PS/2 keyboard

8 USB 1.1/2.0 ports





LAN

VIA® VT6103L (10/100)





IEEE 1394 Ports (optional)

VIA® VT6307L

2 ports

1 bracket with cable





Mounting Holes

6 holes





Mainboard Size

9.6 x 9.6 (unit: inch)

PTM800Pro Mainboard Manual

2-1

  

Installation Procedures

The mainboard has several user-adjustable jumpers that allow you to configure the

system to suit your requirements. This chapter contains information on the various

jumper settings on your mainboard.

To set up your computer, you must complete the following steps:

Step 1 - Set system jumpers.

Step 2 - Install memory modules.

Step 3 - Install the Central Processing Unit (CPU).

Step 4 - Install expansion cards.

Step 5 - Connect ribbon cables, cabinet wires and power supply.

Step 6 - Set up BIOS software.

Step 7 - Install supporting software tools.

WARNING: Excessive torque may damage the mainboard. When using

an electric screwdriver on the mainboard, make sure that the torque is

set to the allowable range of 5.0 ~ 8.0kg/cm.

Mainboard components contain very delicate Integrated Circuit (IC) chips.

To prevent static electricity from harming any of the sensitive components,

you should follow the following precautions whenever working on the

computer:

1. Unplug the computer when working on the inside.

2. Hold components by the edges and try not to touch the IC chips, leads or

circuitry.

3. Wear an anti-static wrist strap.

4. Place components on a grounded anti-static pad or on the bag

that came with the component whenever the components are

separated from the system.

PTM800Pro Mainboard Manual

2-2

1.) Set System Jumpers

Jumpers are used to select the operation modes for your system. Some

jumpers on the board have three metal pins with each pin representing a

different function. A 1 is written besides pin 1 on jumpers with three pins. To

set a jumper, a black cap containing metal contacts is placed over the

jumper pin(s) according to the required configuration. A jumper is said to be

shorted when the black cap has been placed on one or two of its pins.

Clear CMOS

The CMOS RAM is powered by the onboard button cell battery.

To clear the RTC data:

(1) Turn off your computer;

(2) Open the system case and disconnect the ATX power cable;

(3) Place the jumper cap onto the pinpair 2-3 for at least 6 seconds

to enable CMOS clearance;

(4) Place the jumper cap onto the pinpair 1-2 to disable the effect of

CMOS clearance;

(5) Connect the ATX power cable and close the system case;

(6) Turn on your computer until CMOS checksum error appears;

(7) Hold down the Delete key as it boots;

(8) Enter the BIOS Setup to re-enter user preferences.

1 2 3

Normal

(Default)

Enable

(Clear CMOS)







Inhaltsverzeichnis

Andere FIC Hauptplatine Handbücher

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung