Fidelis CommandPost+ Bedienungsanleitung

www.fidelissecurity.com

QUICK START GUIDE

Fidelis Network™

CommandPost+

Appliances

Rev-H

CommandPost (HP DL360-G9) Platforms

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

1. System Overview

The Fidelis CommandPost+ appliance is the central component for command and control of Fidelis

Network components. With CommandPost+, you create and edit sensor policies, craft metadata

analytics and automation, and view alerts from connected sensor and Collector components.

Figure 1: Fidelis Network: CommandPost+ Appliance (Rev-H)

2. Documentation & References

Fidelis Network product documentation, appliance specifications, and instructions can be found at

http://fidelisssecurity.com/customer-support/login or through the icon in the CommandPost GUI.

Appliance Default Passwords

System

Account

Default Password

SSH / Appliance Console

fidelis

fidelispass

CommandPost GUI

admin root

ILO

administrator

(printed on label, top of server)

Technical Support

For all technical support related to this product, check with your site administrator to determine

support contract details. For support of your product, contact your reseller. If you have a direct

support contract with Fidelis Cybersecurity, contact the Fidelis Cybersecurity support team at:

•Phone: +1 301.652.7190

•Toll-free in the US: 1.800.652.4020 – Use the customer support option.

•Email: support@fidelissecurity.com

•Web: http://www.fidelissecurity.com/customer-support/login

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

CommandPost Setup Checklist

Check

Fidelis Network Sensor – Appliance Requirements

Appropriate rack space, power, and cooling (Appendix B)

Rack tools, rails, and connectors

Keyboard and video monitor / KVM switch for temporary appliance setup

Power cables — two per appliance, appropriate for power source and region

Ethernet cables (cat5 and optical) for Admin and iLO ports (Section 3)

Network switches with enough physical ports (Section 4)

Optical transceivers for switches

Logical network information: IP addresses, hostnames (Section 5, Appendix A)

3. CommandPost: Network Port and Cabling Requirements

Each appliance must be connected to the various networks with appropriate cables and (in some

cases) transceivers). The tables below describe the physical connection and cable type associated

with each port on the appliance.

CommandPost Appliance

Port Label

Physical Connection Type (default)

Cable Type (minimum)

Admin

GbE RJ45 (copper) Cat 5 patch cable

ILO GbE RJ45 (copper) Cat 5 patch cable

Figure 2: CommandPost+ Rear Port Assignments (Rev-H)

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

4. CommandPost Networking Environment

The CommandPost+ appliances use the Admin network for service and inter-node communication,

and offer the IPMI/ILO interface for optional out-of-band management of the appliance.

Use the tables below to identify the count and type of switch ports necessary to support the number

of appliances for your deployment.

Admin Network

The Admin Network connects CommandPost to the Fidelis Network sensors, Collectors, and

Sandbox components.

Appliance

Switch Port Type

Qty.

CommandPost+

GbE RJ45 (copper)

ILO / IPMI Network

Optional network for remote/out-of-band server administration.

Appliance

Switch Port Type

Qty.

CommandPost+

GbE RJ45 (copper)

5. Appliance — Logical Network Configuration

Each physical connection must be assigned logical network information. Build a table of the logical

information for each appliance (sample below) that you can reference during configuration. You will

reference this table multiple times during the cluster setup. Appendix A has a worksheet you may

use.

Sample Network Configuration Table

Network Setting

Assignments

Interface: Admin/eth0 iLO/IMM

Hostname (FQDN)

commandpost1.organization.net.

Static IP Address 10.1.2.3 10.2.3.4

Subnet Mask 255.255.255.0 255.255.255.0

Gateway 10.1.2.1

Proxy Server 10.5.6.7

DNS Servers 8.8.4.4, 8.8.8.8

NTP Servers 0.pool1.ntp.org.

Time Zone UTC (+0)

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

6. Appliance Installation

Rack Installation

Install each appliance in an location with necessary power and cooling.

Power

Connect power cables to the power supplies in the back of the appliance.

Network Cabling

Using the connectors and cables described in sections 3 and 4, begin to connect the appliances to

the networks.

Cable the CommandPost+ appliance(s) to the switches:

1. Connect Admin (eth0) port to the ADMIN switch port.

2. Connect the iLO port to the ADMIN (or ILO) switch port (optional).

7. Appliance Network Configuration

1. Power on the Appliance(s).

2. Connect to the component CLI using one of the following methods:

−Via SSH: Directly attach an Ethernet

cable from a client system such as a

laptop to the Admin/eth0 port on the

appliance. The default IP address is

192.168.42.11/24. Assign a static IP

from the same subnet to the network

interface on the client system and

connect to the appliance using SSH.

−Via KVM Console: Connect a keyboard

and monitor to the appliance.

For Fidelis Network appliances version 8.3.4

or later, the screen on the right is displayed:

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

3. If you see the screen above, perform the following steps to apply the software. Otherwise

skip to step 4.

a. With [Perform Initial Install or Factory Reset] selected, press Enter.

b. Use the Up and Down arrow keys to select

“CommandPost”, and press Enter.

The system displays a screen with the

message “Congratulations, your CentOS

installation is complete.”

c. Press Reboot.

4. Use these credentials at the login prompt:

−user: fidelis

−default password: fidelispass

5. From the command line, run: sudo /FSS/bin/setup

You will be prompted for the SU (fidelis) password

6. Within Setup, select Network Settings.

7. Configure the network parameters for the system and each active network interface.

a. Use the Network Configuration table you prepared earlier.

b. When complete, return to the top menu.

8. When complete, select [OK] to leave Setup.

9. From command line, reboot the system: sudo /fss/bin/shutdown.pl --user admin --reboot

8. Fidelis Licensing — “Air Gap” and “No Feedback”

Installations

If your Fidelis Network products are deployed with “Air Gap” or “No Feedback” licenses, you must

install them with a license key. The CommandPost GUI shows the Host ID for the Fidelis Network

hardware, the current license key, and the expiration date. To access the License page:

1. Log into the CommandPost.

2. Click System / Components / Console / Config.

3. Click the License tab.

If your license key shows <no license> or <invalid>. Refer to Request a License for more

information.

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

Request a License

1. Click Request License or click the Host ID to start an email to license@fidelissecurity.com

that includes the product type, serial number, and Host ID.

2. Include in the body of the email:

−contact name and phone number

−organization name and site location

Fidelis Cybersecurity will respond within one business day with a license key.

Enter a License Key

After receiving a response to a license request:

1. Copy the license key exactly into the License Key box.

2. Click Save.

When complete, Fidelis CommandPost+ is operational and ready for additional Fidelis Network

components.

Appendix A: Network Configuration Worksheet

CommandPost+

Network Setting

Assignments

Interface: Admin/eth0 iLO/IMM

Hostname (FQDN)

Static IP Address

Subnet Mask

Gateway

Proxy Server

DNS Servers

NTP Servers

Time Zone

QUICK START GUIDE

Fidelis Network™ CommandPost Appliances

www.fidelissecurity.com©Fidelis Cybersecurity

Appendix B: System Specifications

CommandPost+

(Rev-H)

CommandPost+

(Rev-G)

Form Factor

1U rack-mount chassis, SFF

CPU

Dual Intel Xeon v3

8-core 2.6 Ghz

2x Intel Xeon v2

6-core 2.6 Ghz

Memory

96 GB

ECC DDR4 2133Mhz

96 GB

ECC DDR3 1600Mhz

Storage Capacity &

Configuration

3 TB

6x HDD, RAID-5

3 TB

6x HDD, RAID-5

Network Adapters (Default

Config)

4x 1GbE 4x 1GbE

Out of Band Management Integrated Lights Out Management (ILO)

Integrated Management

Module II (IMM2)

Power Supply

Dual hot-swap

800W High Efficiency

AC power supplies

Dual hot-swap

550W High Efficiency

AC power supplies

Dimensions

H: 4.32 cm (1.7 in)

W: 43.47 cm (17.1 in)

D: 69.85 cm (27.5 in)

W: 440 mm (17.3 in)

D: 734 mm (28.9 in)

H: 43 mm (1.7 in)

Weight (appx.)

15.6 kg (35.5 lb)

Operating Temperature

10° to 35°C (50° to

95°F) at sea level

5°C to 40°C (41°F to 104°F)

Altitude: 0 to 915 m (3,000 ft)

QSC_Fidelis_CP_20170524

Inhaltsverzeichnis

Andere Fidelis Netzwerk-Hardware Handbücher

Fidelis

Fidelis Collector Controller 10G Bedienungsanleitung

Fidelis

Fidelis Deception Decoy Server FDH-1000-C Bedienungsanleitung

Fidelis

Fidelis Common Criteria Bedienungsanleitung

Fidelis

Fidelis Network Collector SA Bedienungsanleitung

Fidelis

Fidelis FDH-3000 Bedienungsanleitung

Fidelis

Fidelis Network CommandPost Bedienungsanleitung

Fidelis

Fidelis Network Collector SA Rev-1 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung