Beam Angle
Lens Diameter
Mounting
Tilt Angle
Control
Mini USB Interface
Housing Colors
Protection Class
Estimated LED Lifetime (L70)
Certifications
50,000 hours
IP20
Black
For firmware upgrades
130mm / 5 inch
27°-50° (With Fresnel Lens)
DMX, 512 Addresses, XLR5, RJ45
+/- 90°
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
CE, UL, FCC
Size (without Barndoor)
Weight (Includes Yoke)
LED
Thermal Design
CCT Range
CRI
Power Consumption
Power Connection
Input Voltage
Operating Temperature 32-104ºF / 0-40º C (over temperature protection)
Dense Matrix LED
2800-6500K Continuous Tuning
>93 (3000-5600k)
185W Max
Detachable PowerCon Cable
AC Power: 100-240 VAC, 50~60Hz, Max 185W
Advanced Vapor Cooling
12 lbs / 5.5 kg
305mm X 325mm x 380mm With yoke( )
6
Specifications
For Your Safety
•CAUTION! High Beam Intensity! - Do not look into the Light Source (5) of the fixture.
•Do NOT point the light at combustable or flammable materials.
•Do NOT attempt to disassemble the body of Q500. Doing so will void the warranty.
•Do NOT install Q500 in a damp or wet area.
•Do NOT cover/block the side and back air vents.
•Use only the included power supply. Failure to do so may cause damage to the light.
•Use only a soft, dry towel to gently clean the exterior of the light.
•Do NOT lift or suspend the light by the power cable.
•Do NOT use the Q500 or accessories if they display any physical damage.
•Before first use, make sure to remove all protective membranes.
•Do NOT use the gel holder designed for the P series of lights with the Q500.
•Do NOT mount the Q500 in a hanging position without a separate safety cable.
A safety cable is NOT included with the Q500.
