Fireye UC485 Bedienungsanleitung



DESCRIPTION

TheUC485isanopticallyisolatedUSBtooneportRS-422/485converter.Theprovidedcable

plugsintoanyavailableUSBportonyourcomputerorUSBhubandthedevicewillshowupasan

additionalCOMportintheWindowsDeviceManager,makingtheUC485compatiblewithWin-

dowsapplications.TheUC485isanUSBtoRS485converterthatdrawspowerfromtheUSBport

sonopowersupplyisrequired.

TheUC485isanaccessoryfortheFireye®BurnerLogix,FLAME-MONITOR™andMicroM

flamesafeguardcontrolsystems,theNEXUSsystemwhenusingaComFireoranNXMBI,the

45FS1and45UVFS1FlameSignatureScanners™andthe95IRS2,95UVS2and95DSS2InSight

integratedscannersandthe105F1-1Paragonscanner.

Opticalisolationoffersasignificantimprovementinnoiseimmunityandimprovesreliabilityin

communicationsthroughput.TheUC485isanUSBtoRS485converterusedtoperformthefollow-

ingfunctions:

CustomizetheoperatingcontrolmessagesandlockoutalarmmessagesoftheYZ300Interlock

AnnunciatoruseintheBurnerLogixYBandZBsystems.

CustomizetheoperatingcontrolmessagesandlockoutalarmmessagesoftheE300Expansion

ModuleusedintheFLAME-MONITORsystem.

InterfacebetweenaWindowsbasedPCrunningtheFS700WCommunicationSoftwareandthe

45FS1and45UVFS1FlameSignatureScannertoprovideremotecommunicationscapability.

InterfacebetweenaWindowsbasedPCrunningtheFS950WCommunicationSoftwareandthe

95IRS2,95UVS2and95DSS2InSightintegratedscannerstoprovideremotecommunications

capability.

InterfacebetweenaWindowsbasedPCrunningtheE720WBoilerWorxCommunicationSoft-

wareandtheE340BurnerManagementControlSystemtoprovideremotecommunications

capability.

InterfacebetweenaWindowsbasedPCrunningtheComFireNEXUSCommunicationSoft-

wareandtheNEXUSparallelpositioningcombustioncontrolsystemstoprovideremotecom-

municationscapability.

InterfacebetweenaWindowsbasedPCrunningthePGEXLT(ExplorerLite),FEX1(Fireye

Explorer)CommunicationSoftwareandthe105F1-1Paragonor95DSS3InSightIIintegrated

scannerstoprovideremotecommunicationscapability.

TheUC485providesthemeanstodirectlyconnecttoanydevicethathasRS485communication

capability.

TheUC485ispackagedwithanRJ12telephonejackmountedonaPCboard,(ED612),toprovide

aneasymethodtousetheED512cablestointerfacetotheBurnerLogixsystemincludingthe

YZ300/YZ320InterlockAnnunciatorsandEPprogrammersforcustomizingmessages.

TheUC485includesTRANSMITandRECEIVELED’sthatindicatethetransmissionandreception

ofdatarespectively.TheLED’sarealsousefulwhenfirstconfiguringasystem.

UC485

OPTICALLY ISOLATED

USB to RS422/RS485

CONVERTER

UC-4851

APRIL 8, 2013



RS-485 Control

No special software is required to control the RS-485 receiver or transmit line driver. The driver is

automatically enabled during each byte transmitted in RS-485 mode. The transmitter is always

enabled in RS-422 mode. The receiver is tri-stated during each byte transmitted in the echo-off

mode. The receiver is always enabled in the echo-on mode. There are 4.7k Ohm pull-up/pull-down

resistors on the RDA and RDB lines. A termination resistor is usually not necessary but may be

added if needed.

Dip Switch Set-up

Dip switches allow the UC485 module to be configured for two-wire or four-wire, RS-422 or RS-

485 modes. In two-wire mode the TDA(-) and RDA(-) are tied together so are TDB (+) and RDB

(+), making multi-dropping the UC485 converter into an existing network easy.

For use with Fireye equipment it is recommended to have all dip switches set to the ON position.

SPECIFICATIONS

Dimensions: .0.5 x 1.7 x 0.8 in (8.9 x 4.3 x 2.1 cm)

Temperature Range: 0° to 70° C (32° to 158° F)

Rs-422/485 Baud Rate: Pluggable (removable terminal block with ED612

RS-422/484 Connector: 12 Mbps

USB Connector: USB type-B female

USB Power: Low power device (<100 mA)

USB Compatibility: USB 1.0, 1.1 and 2.0

Operating System: Windows 98/SE, 2000, ME XP, Vista, 7

Isolation: 2000 V RMS

Surge Protection: 15KV ESD

Accessories: Driver CD, USB Cable, ED612

Switch OFF ON

One (1) TD always enabled

(TD 422)

TD always enabled during

data transmission

(TD 485)

Two (2) RD always enabled

(ECHO ON)

RD disabled during data

transmission

(ECHO OFF)

Three (3) Four-wire mode

(4-Wire)

Tw o - w i r e m o d e

(2-Wire)

Four (4) Four-wire mode

(4-Wire)

Two-wire mode

(2-Wire)

RS-422

Echo ON

4 Wire

RS-485

Echo OFF

2 Wire

OFF ON

DIPSWITCHES - REAR VIEW



INSTALLATION FOR WINDOWS

CUSTOMIZING BurnerLogix YZ300 OR FLAME-MONITOR E300 MESSAGES

You can customize the recycle and lockout alarm message associated with each pair of terminals of

the E300 Expansion Module and YZ300 Interlock Annunciator. Each customized message can be up

to 40 characters in length.

The following equipment is required:

A Windows compatible PC with E300 (Flame-Monitor) or YZ300P (BurnerLogix) programming

software.

UC485 USB to RS485 converter with USB cable.

ED612 with RJ12 connector mounted and wired into terminal block of the UC485.

For E300 messages, an EP programmer with an engineering code of 28 or later.

For BurnerLogix, a YZ300 Interlock Annunciator.

#2. The screen above appears. Make sure Install

the software automatically is selected. Then

select the Next> button.

You may be prompted to BROWSE the CD to

select the correct folder that contains the

proper driver.

#1. Plug the UC485 into an available USB

port on your Windows compatible computer

or connected hub. The screen above appears,

telling you that there is a new device plugged

into the USB bus. Click on No, not this time,

then the Next> button.

#3. The screen above will appear. Click the

Finish button to complete the installation. #4. Continue to install the serial port in the

same way as installing the converter. Click

the Next button followed by the Finish but-

ton. It takes a couple of seconds for the serial

port to be installed.



1. Connect the UC485 converter to an available USB port of a Windows compatible computer.

FIGURE 1. .

2. Connect the ED612 (RJ12 female connector provided with the UC485) to terminals TD(A),

TD(B), RD(A), and RD(B) on the UC485

3. Plug one end of the ED512-2, -4, -8 cable into the jack on the ED612 and the other end into

either of the jacks located on the EP programmer for a FLAME-MONITOR system or directly

into the YZ300 for a BurnerLogix system.

For complete details on customizing the E300 messages, refer to bulletin E-3001.

For complete details on customizing the YZ300 messages, refer to bulletin YZEM-3001.

COMMUNICATING WITH 45FS1/45UVFS1 SIGNATURE SCANNERS OR 95IRS2/95UVS2/95DSS2 AND

95DSS3 INSIGHT II FAMILY OF INTEGRATED SCANNERS OR PARAGON SCANNERS

These flame scanners provide remote communications capability over an RS485 communication

data link. The data link uses a single, twisted shielded pair wire (e.g. Belden 8761) in a multi-drop

(e.g. daisy chain) wiring configuration. A Fireye communication software program running on a

Windows compatible PC is required for communicating with the flame scanners.

Since the flame scanners communicate over the data link via RS485, the UC485 USB/RS485 con-

verter is required for the communications Port of the PC. The UC485 converter is wired in the fol-

lowing manner:

FIGURE 2. UC485 WIRING

GND

TDA (-)

TDB (+)

RDA (-)

RDB (+)

TDA (-)

TDB (+)

RDA (-)

RDB (+)

GND

ED512, -2, -4, -8

ED612

GND

TDA (-)

TDB (+)

RDA (-)

RDB (+)

COM B

COM A

COM B

COM A

(ORANGE)

(BROWN)

COMMUNICATIONS

TERMINATOR 100 

ON LAST SCANNER

USB CABLE

COM B

COM A

CONNECT TO

USB PORT ON

PC OR HUB



For complete wiring details on wiring and communicating with these flame scanners, refer to the fol-

lowing bulletins:

COMMUNICATING WITH THE E340 BOILER CONTROL

The E340 Boiler Control also communicates over an RS485 communication data link. The data link

uses a single, twisted shielded pair wire (Belden 8761) with the E340 controls wired in a multi-drop

(e.g. daily-chain) wiring configuration. The Fireye communication software program (P/N E720W)

is required for communication with the E340 controls.

Wire the UC485 converter to the E340 controls in the following manner:

FIGURE 3.

SCANNER BULLETINS SOFTWARE BULLETINS

45FS1/45UVFS1

SIGNATURE SCANNER

CU-32 & CU-33 CU-56 (FS700W/WINDOWS)

95IRS2/95UVS2/95DSS2 INSIGHT

INTEGRATED SCANNERS

CU-95 CU-102 (FS950W/WINDOWS)

95DSS3 INSIGHT II INTEGRATED

SCANNERS

CU-113 CU-109 (FEX1/WINDOWS)

105F1-1 PARAGON SCANNERS CU-108 CU-111 (PGEXLT/WINDOWS)

GND

TDA (-)

TDB (+)

RDA (-)

RDB (+)

USB CABLE COM B (TERMINAL 80)

COM A (TERMINAL 81)

COM B (TERMINAL 80)

COM A (TERMINAL 81)

FIRST E340

LAST E340

COMMUNICATIONS

TERMINATOR

P/N 61-6439

CONNECT TO

USB PORT ON

PC OR HUB



NOTICE

When Fireye products are combined with equipment manufactured by others and/or integrated into

systems designed or manufactured by others, the Fireye warranty, as stated it its General Terms and

Conditions of Sale, pertains only to the Fireye products and not to any other equipment or to the

combined system or its overall performance.

WARRANTIES

FIREYE guarantees for one year from the date of installation or 18 months from date of manufacture

of its products to replace, or, at its option, to repair any product or part thereof (except lamps and

photocells) which is found defective in material or workmanship or which otherwise fails to conform

to the description of the product on the face of its sales order. THE FOREGOING IS IN LIEU OF

ALL OTHER WARRANTIES AND FIREYE MAKES NO WARRANTY OF MERCHANT-

ABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED. Except as specifically

stated in these general terms and conditions of sale, remedies with respect to any product or part

number manufactured or sold by Fireye shall be limited exclusively to the right to replacement or

repair as above provided. In no event shall Fireye be liable for consequential or special damages of

any nature that may arise in connection with such product or part.

FIREYEUC-4851

3 Manchester Road APRIL 8, 2013

Derry, New Hampshire 03038 USA Supersedes September 28, 2012

www.fireye.com

Inhaltsverzeichnis

Andere Fireye Medienkonverter Handbücher

Fireye

Fireye EC485 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung