Firstech RF-1WR3R-FM Technisches Handbuch

Andere Firstech Fernstartsystem Handbücher

Firstech

Firstech CS-600 Bedienungsanleitung

Firstech

Firstech FT-DC2-S Bedienungsanleitung

Firstech

Firstech CM7200 Gebrauchs- und Pflegehandbuch

Firstech

Firstech CM6200 Bedienungsanleitung

Firstech

Firstech CM-900 Gebrauchs- und Pflegehandbuch

Firstech

Firstech DR-X1 Bedienungsanleitung

Firstech

Firstech 1BAMR-Chrome Bedienungsanleitung

Firstech

Firstech CM600-AS Bedienungsanleitung

Firstech

Firstech FT-MB221-DC Bedienungsanleitung

Firstech

Firstech 1BAMR Bedienungsanleitung

Firstech

Firstech 2WQ9R-SS Technisches Handbuch

Firstech

Firstech FT-MBKG20-HRN Bedienungsanleitung

Firstech

Firstech DATA CONTROLLER FT-MB164-DC Bedienungsanleitung

Firstech

Firstech CM-900 Bedienungsanleitung

Firstech

Firstech COMPUSTAR T13/R5 Gebrauchs- und Pflegehandbuch

Firstech

Firstech FT-DC3-HC Bedienungsanleitung

Firstech

Firstech CM5200 Bedienungsanleitung

Firstech

Firstech FT-MB211-DC Bedienungsanleitung

Firstech

Firstech FT-EZGO Technisches Datenblatt

Firstech

Firstech 1WS2R-AF Technisches Handbuch

Firstech

Firstech DC3 Bedienungsanleitung

Firstech

Firstech 2WR5R-SF Bedienungsanleitung

Firstech

Firstech 2WG5R - 900SH Bedienungsanleitung

Firstech

Firstech CM6200 Bedienungsanleitung

Beliebte Fernstartsystem Handbücher anderer Marken

AstroStart

AstroStart 803U Bedienungsanleitung

Durite

Durite 0-649-20 Handbuch

EINHELL

EINHELL BT-PS 1000 Handbuch

Linear

Linear ACCESS AK-21 Technische Daten

Soundstream

Soundstream TARANTULA RS.2 Bedienungsanleitung

Jaycar Electronics

Jaycar Electronics MB3752 Bedienungsanleitung

Ultra Start

Ultra Start 72 Series Bedienungsanleitung

ADS

ADS FLASHLOGIC FLRSVW1 Bedienungsanleitung

Selecta

Selecta JS012 Bedienungsanleitung

Black Widow Security

Black Widow Security BW RAS 400 Bedienungsanleitung

Vector

Vector Power City DK080706 Beilage

Code Alarm

Code Alarm CA-535 Bedienungsanleitung

Ozito

Ozito OJS-800 Bedienungsanleitung

Profi-Partner

Profi-Partner 46387 Bedienungsanleitung

EZ STARTER

EZ STARTER EZ-45 Bedienungsanleitung

Viper

Viper 4204 Bedienungsanleitung

Essex Electronics

Essex Electronics KE-1701 Bedienungsanleitung

EINHELL

EINHELL EGS 3600 Handbuch

8102REUCL000100 // FT-1B Guide REV1

QUICK START CARD

RF-1WR3R-FM

Tap this button for 1 second to lock your doors and/or arm your vehicle.

Tap this button twice within 1 second to unlock your doors and/or disarm

your vehicle.

Hold this button for 3 seconds to start your vehicle. Your vehicle’s parking lights

will flash once and/or siren will chirp once for confirmation. Repeat and your

vehicle will shut off.

Valet Mode: If your remote start is not working, you may be in Valet Mode. Your parking

lights will also not flash. Your doors will still lock and unlock. To exit Valet Mode, turn the

vehicle’s ignition On and then tap this button 5 times, waiting a second between each tap.

Your vehicle will flash the parking lights twice and exit Valet Mode. You can also exit Valet

Mode by turning the ignition On and then tapping the foot brake 10 times or reprogramming

your remote(s).

1W1B_QuickCard line.indd 1 2013/6/6 9:28:50

ALARM TRIGGER EVENT LED FLASHES

Door, Hood, Trunk, or Ignition On triggered 2, Pause, Then Repeat

Full triggered shock sensor 3, Pause, Then Repeat

Optional sensor triggered 4, Pause, Then Repeat

Panic Mode 5, Pause, Then Repeat

PARKING LIGHT FLASHES REMOTE START ERROR

3 then 1 1: Motor running

3 then 2 2: Key in ignition on position

3 then 3 3: Door open

(manual transmission only)

3 then 4 4: Trunk open

3 then 5 5: Foot brake on

3 then 6 6: Hood open

3 then 7 7: Reservation off

(manual transmission only)

3 then 8 8: Tach or voltage sensing failure

3 then 9 9: FT-DAS sensor shutdown

3 then 10 10: System is in Valet Mode

ALARM LED CODES

QUICK START CARD

RF-1WR3R-FM

START ERROR CODES

If you have an alarm and optional LED(s) installed, it will flash once

a second if armed. If your alarm is triggered then the LED(s) will flash

more than once until it is disarmed. See the table below for what

each LED code represents.

To reprogram your remote first cycle the key in the ignition 5 times

within 7 seconds. Parking lights will flash. After that tap the Lock

button on your remote. Repeat for any additional remotes. If you

receive two parking light flashes, your system has exited remote

programming mode and you must retry.

Register online at www.compustar.com within 10 days of purchase to

activate your new remote’s warranty.

Questions/comments? Contact us at 888-820-3690 from 8

AM to 5 PM PST. Also please visit www.compustar.com for a

complete user’s manual.

1W1B_QuickCard line.indd 2 2013/6/6 9:28:50