FlashPoint eVOLV 200 R2 Bedienungsanleitung
eVOLV 200
200ws TTL Modular Flash
with integrated R2 radio Receiver
FPLFEV200
2
FLASHPOINT eVOLV 200 Flash Instruction Manual
Intro
Before using this product
Please read this user manual carefully in order to ensure your safety and the proper operation of this
product. Keep for future reference.
Thank You for Choosing Flashpoint!
The new eVOLV200 is not just a mighty 200 watt second fully cordless TTL strobe, but an amazing
miniaturized modular“SpeedMonoLight”system with interchangeable ash heads. You can snap
in the best of traditional speedlite style Fresnel heads at GN170 (ft) or chose to use to the barebulb
parabolic reector head at GN 196 (ft) with super even spread, just by plugging it in. The incredible
amount of power and control in these compact and lightweight ashes, make this design a rst
choice of professional photographers with an eye for exible multiple light set up.
The eVOLV200 has a max recycle time of under 2 seconds and enough energy to cover at least 500
full power shots. That gives more exibility and instant solutions for multiple o camera lighting
while maintaining all of the investment in light modiers in the Streaklight and ZoomLion models.
The battery recharge is a snap, too, using the external power charger to keep the action going
without tying up the ash to re-energize. Add the pro LED modeling light feature and the picture is
complete.
The eVOLV200 is the next evolution of the Flashpoint R2 radio system, totally compatible with the
Canon, Nikon and Sony systems, for remote power control and shooting. With a focus on portable
lighting, the R2 Family frees your camera to go out and shoot at will - whether you are a wedding or
event photographer, environmental portraiture shooter, freelance commercial illustrator,
photojournalist, a backpack adventurer, or fast action sports snapper.
3
Features of The eVOLV200
Lightweight and portable.
Greatest power in the most compact form,
precluding the need for cords and AC powered
strobes. Produces up to 200Ws, is up to 3 times
powerful as speedlites in the same footprint.
Studio quality interchangeable
modular ash heads.
Fresnel Head: Standard bar ash tube de-
sign with coverage of a smooth 35mm
Fresnel lens spread. Incorporates a 20W
LED modeling lamp. Accepts a barndoor
with grids for accent lighting and the abil-
ity to control light spill and are, plus
magnetized color gels for special eects. Fres-
nel speedlite ash head GN 170(ft)/52(m) ISO
100
Bare Flash Tube: Pro quality 360 degree Bare-
bulb ash tube which accepts all modiers
and accessories from the Flashpoint Streak-
light. Bare bulb ash head in reector GN
197(ft)/60(m) ISO 100
Built-in R2 2.4G wireless radio
TTL system.
Fully supports auto sensing and switching
Canon E-TTL II, Nikon i-TTL, Sony TTL operating
on R2 2.4G wireless family TTL systems. All R2
Family radio transmitted functions are received
for over 330 feet from any R2 transmitter.
High Speed Sync.
The answer for using ash to control strongly
lit sun drenched subjects and ll-ash even
when shutter speeds exceed the standard
sync your camera manufacturer recommends
for proper sync. IGBT ring allows for shorter
ash durations, 1/8000s high-speed sync ash,
and TTL.
Sharp LCD display panel.
Super clear dot matrix info center and
convenient display of all functions, ash state
and warnings.
Interchangeable Battery Power.
Replaceable long-life Lithium, 14.4V/2900mAh
power module, with 0.01- 2.1s recycling and
up to 520 full power ashes.
Sync options.
Use R2 wireless radio, trigger as slave optically,
or with a standard 3.5mm sync cord connected
to your camera.
8 stop range.
Power adjusts from full power to 1/128
in 1/3 stop increments.
Stable color.
5600±200K color temperature at over the
entire power range.
2 way stand mount.
Tilt head with umbrella mount to perch on top
of any lightstand, grip or support with a 5/8”
stud.
4
For Your Safety
• Always keep this product dry. Do not use in rain or in damp conditions.
• This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may
result in electric shock. Do not disassemble. Should repairs become necessary, this product must
be sent to an authorized maintenance center.
• Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric
shock may occur if you touch the electronic parts inside it.
• Do not use the ash unit in the presence of ammable gases, chemicals and other similar
materials. In certain circumstances, these materials may be sensitive to the strong light emitting
from this ash unit and re or electromagnetic interference that may result.
• Do not leave or store the ash unit if the ambient temperature reads over 120°F/50°C
(e.g. in sun drenched automobile). Otherwise the electronic parts may be damaged.
• Do not use any power supply other than the included one to charge the battery.
• Do not insert metal parts into any lighting equipment.
• Do not touch the electrical contacts on the strobe or battery or contact them with any conductive
materials.
• Do not re the ash directly into the eyes (especially those of babies) within short distances. Other-
wise, visual impairment may occur. When taking pictures of babies, keep the ash unit at least 3.3
feet (1 meter) away from them. Using bounce ash to reduce light intensity is also recommended.
• This strobe has an over-heat protection circuit, rapid continuous ring will cause the strobe to slow
operation and trigger a“cool down” period. After this period, the strobe will resume normal opera-
tion. You may also reboot the strobe by cycling the power o and then on.
• The strobe has a locking mechanism to ensure secure operation. To avoid damage, slide the release
before removing any reectors or accessories.
• In case of abnormal function, sparks, excessive heat, ames or smoke, immediately power o the
unit and disconnect the battery if safely possible. Have it checked by an authorized technician.
5
Contents
Intro ..................................................................................................................................................... 2
For your safety................................................................................................................................. 4
Name of Parts .................................................................................................................................. 6
Control Panel.................................................................................................................................... 7
LCD Panel........................................................................................................................................... 7
eVOLV200 kit contents................................................................................................................. 8
Separately Sold Accessories....................................................................................................... 8
Attaching Flash Heads ................................................................................................................. 9
Battery ..............................................................................................................................................10
Power Management ...................................................................................................................11
Modeling Lamp ............................................................................................................................11
Flash Modes....................................................................................................................................11
Flash Mode— TTL Autoash ...................................................................................................11
FEC (Flash Exposure Compensation) ...................................................................................12
Flash Mode—M: Manual Flash...............................................................................................12
Slave Settings.................................................................................................................................12
Flash Mode—Multi/Stroboscopic Flash.............................................................................13
High-Speed Sync..........................................................................................................................14
Wireless Flash Shooting: R2 Radio (2.4G) Transmission................................................15
Ratio Lighting Examples ...........................................................................................................16
Optical Wireless Control Function.........................................................................................16
Sync Triggering .............................................................................................................................16
C.Fn: Setting Custom Functions.............................................................................................17
MASK Custom Function 5.........................................................................................................18
Troubleshooting...........................................................................................................................18
Temperature Protection Function.........................................................................................19
Technical Data ...............................................................................................................................20
Firmware Upgrade.......................................................................................................................20
Maintenance..................................................................................................................................22
Warranty and Customer Service ............................................................................................23
Conventions used in this Manual
This manual is based on the assumption that both the camera and camera ash’s power switches
are powered on.
Reference page numbers are indicated by“Page ?/?”.
The following alert symbols are used in this manual:
The Caution symbol indicates a warning to prevent shooting problem.
The Note symbol gives supplemental information.
6
Figure A
1. Barebulb Flash Head
2. Fresnel “Speedlite” Flash Head
3. Head Mounting System
4. Support Mounting Socket (¼”x20 thread)
5. Power Switch
6. R2 Wireless Radio and Optic Light
Sensor
7. LCD Control Panel
8. Battery Compartment
9. Battery Release Button
10. Wireless Control Port/USB Port
and 3.5mm Sync Cord Jack
11. Head Release Button
Figure B
13. Barebulb Head Accessory Lock Knob
14. Mounting Socket (¼”x20 thread)
12. Lithium Battery
Name of Parts
Figure D
Figure C
7
(A) R2 Radio Status
Radio Operation Pg 15
Manual Operation Pg 12
(B) Channel Status Pg 15
(C) MODE: TTL/Manual/Multi Flash Pg 11-13
(D) High Speed Sync Pg 14
(E) Battery Level Pg 10
(F) TTL (FEC) Exposure Compensation /
Manual Power Setting Pg 12
(G) Flash Duration / Multiash Frequency /
Sleep Pg 13
(H) Overheat Warning Pg 19
(I) Modeling Lamp Pg 11
(J) Sleep Status Pg 11
(K) Optic Slave Pg 16
(L) Audio Signal Pg 17
(M) Timer Pg 17
(N) Mask Status Pg 18
(O) Flash Duration Symbol Pg 12
(P) Custom Function Pg 17
(Q) Group Pg 15-16
Control Panel:
LCD Panel
Figure E
Figure F
15. LCD Panel
16. <GR/CH>Group/Channel Button
(long press for 2 seconds)
17. Flash Ready Indicator, < / C.Fn>
Test Button/ C.Fn Button
(long press for 2 seconds)
18. Select Dial
19. <SET> Set Button
20. < /
H
>Modeling Lamp Button/
High Speed Sync Button (long press for 2
seconds)
21. < MODE / > Mode Selection Button/
Wireless Selection Button
(long press for 2 seconds)
8
Your eVOLV200 can be used in combination with the following accessories, sold separately, so as to
achieve the best photography in any situation or assignment:
R2 Wireless Flash Trigger, R1 Remote Control, Softbox, Beauty Dish, Hexapop/Parapop
Softboxes, Snoots, Light Stands, and the whole Glow line of light modiers available at
Adorama.com.
1- eVOLV200 ash body
1- Barebulb Flashhead Module
1- Barebulb Flashtube
1- Fresnel Speedlite Flashhead Module
1- Stand/Umbrella holder
1- Battery charger
1- Lithium battery pack
1- Barndoor
1- Grid
4 - Magnetized Color Gels
1- Protecting bag
1- Instruction manual
eVOLV200 part by part
Optional Accessories
Figure G
9
1. Start with a removing an attached ash
head by the sliding catch lock to the left (g
B / 11) and pulling gently on the head to slip
it o the mounting plate of the eVOLV200
body.
2. Remove the reector or other accessories
from the ash head b efore mounting it on
the eVOLV200 body.
3. The modular Barebulb ash head locks into
the eVOLV200 body by lining up the pins on
the head to the sockets of the eVOLV200
(g H & I) and sliding the head down,
engaging the head to the body. The lock
automatically closes.
4. Take the Barebulb ashtube and align the
pins of the tube carefully with the tube
socket by matching the 3 pins on the base of
the ash tube with the 3 sockets in the Tube
Socket (g J & K). Push the ash tube in until
it is securely seated into the socket.
5. You have the option to attach a reector
or any Streaklight light modier on to the
Barebulb head socket surrounding the
ashtube socket. The knob on the side of the
module (g J) locks and unlocks the add-on
accessory with a twist right or left.
Speedlite and Bare Bulb Modular Flash Heads
Figure H Figure J
Figure I Figure K
Attaching the Bare Bulb Flash Head
Attaching the Fresnel Speedlite Flash Head
1. Start with a removing an attached ash
head by the sliding catch lock to the left (g
B / 11) and pulling gently on the head to slip
it o the mounting plate of the eVOLV200
body.
2. The modular Fresnel Speedlite ash head
locks into the eVOLV200 body by lining up
the pins on the head to the sockets of the
eVOLV (g H & I) and sliding the head down,
engaging the head to the body. The lock
automatically closes.
10
Lithium Battery
Features
Warnings and Advice
Battery Level Indicator
1. The Flashpoint eVOLV200 uses a high capac-
ity Li-ion polymer battery which has long
runtime. The available full power discharges
are approximately 500 times.
2. Safety rst. The internal circuits are designed
to prevent overcharge, over discharge,
current overrun, and short circuit.
3. It takes only 4 hours to fully charge the
battery by using the included standard
battery charger.
1. Do not short circuit.
2. Do not expose to rain or immerse into
water. This battery is not water proof.
3. Keep out of reach of children.
4. No over 24 hours’ continuous charging.
5. Store in dry, cool, ventilated places.
6. Do not expose the battery to high tempera-
tures or into re.
7. Dead batteries should be disposed according
to local regulations.
8. If the battery has not been charged for a long
time due to product idleness, please charge it
to refresh the energy reserve.
9. If the battery had not been used for over 3
months, please recharge fully.
Make sure the battery pack is securely
locked in the chamber of the ash. (g D)
Check the battery level indication on the
LCD panel to see the remaining battery level
(g F/E).
Battery Level
Indication
on the LCD
Panel
Meaning
3 bars Full battery
2 bars Medium battery
1 bar Low battery
Blank symbol Low battery, re-
charge immediately.
Blinking
symbol
The battery level
depleting quickly
and will immediately
auto shutdown the
ash in 1 minute.
Please recharge the
battery as soon as
possible (within 10
days) to preserve the
life of the battery.
Inhaltsverzeichnis
Andere FlashPoint Kamerablitz Handbücher
FlashPoint
FlashPoint FPLFSMZL Bedienungsanleitung
FlashPoint
FlashPoint FPLFSMZM Bedienungsanleitung
FlashPoint
FlashPoint FPLFSMZ Bedienungsanleitung
FlashPoint
FlashPoint Zoom Mini Bedienungsanleitung
FlashPoint
FlashPoint FPLFSL360C Bedienungsanleitung
FlashPoint
FlashPoint ZOOM TTL FLASH R2 Bedienungsanleitung
