Flextone EX1 Bedienungsanleitung
Model # EX1
HD E-GAME CALL
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Flextone” is a registered trademark of Wild Game Innovations, LLC.
“ECHO” & “Sport Responsible” are TM trademarks of WGI Innovations, LTD.
User’s Manual
INCLUDED PARTS
1) ECHO™ 80 electronic game call – (1)
2) Padded Carrying Strap – (1)
3) Product Information Guide – (1)
4) Ground Peg – (1)
PAGE 2
Model # EX1
HD E-GAME CALL
602 FountainParkway
Grand Prairie,TX 75050
800.847.8269
“Flextone” is a registered trademark of Wild Game Innovations, LLC.
“ECHO”& “Sport Responsible”are TM trademarks of WGI Innovations, LTD.
User’s Manual
1Locate and remove the ECHO remote control by
pulling the remote towards you and then sliding
it up. (Illustration A)
2Remove the battery compartment cover by
using a coin or a at tip screw driver to unscrew
the retaining screw. (Illustration B) 3Install two AAA batteries (Not Included). ‘-’
means that the ‘-’ end of battery will be up
when installed. ‘+’ means ‘+’ end of battery is up
when installed. (Illustration C)
(Illustration A)
(Illustration B)
(Illustration C)
INSTALLING BATTERIES
PAGE 3
5Next, locate the battery compartment
ap on the Main unit. Remove the battery
compartment ap by using a coin or a at tip
screw driver to unscrew the retaining screw. Once
the screw is removed, pull the ap towards you.
NOTE: the ap is not a separate piece from the
unit and will not come off. (Illustration E)
(Illustration D)
(Illustration E)
(Illustration F)
PAGE 4
4Reinstall and securely fasten the battery
compartment retaining screw. (Illustration D)
+
_
_
ATTACHING THE CARRYING STRAP
1Attach carrying strap by locating the loops
on each end of the main unit and connecting
one end of the carrying strap to one of the loops.
You can do the same when using bungee cords
(Illustration H)
PAGE 5
6Install six AA batteries (Not Included).
‘-’ means that the ‘-’ end of battery will
be up when installed. ‘+’ means ‘+’ end of
battery is up when installed. (Illustration F)
7Securely fasten the battery ap by
pushing the ap down and reinstall
at head screw. (Illustration G)
(Illustration G)
(Illustration H)
TO USE CALL
PAGE 6
1Turn the main unit on by pressing the
power button located on the grip of
the unit. This will activate the audible call.
(Illustration I)
(Illustration I)
2To maximize the effectiveness of the
ECHO, decide how you would like to
use it. It can either be held in the hand
(Illustration J), mounted to a tree with
bungee straps (not included) (Illustration H)
or secure it in the ground with the ground
peg (Illustration K).
(Illustration J)
PAGE 7
(Illustration K)
Press and hold the middle button until LCD
is illuminated and then release. Unit is now
on. Note: The LCD will enter sleep mode in
approximately 40 seconds. (Illustration L)
1First, select desired call category by
pressing and releasing the middle button.
Category name should now be blinking.
(Illustration M)
MUTE
SEND
VOL+
VOL-
(Illustration L)
TURNING REMOTE ON
CHOOSING CALL CATEGORY
BIRD
BLUE JAY
BIRD
BLUE JAY
PAGE 8
(Illustration M)
(Illustration N)
MUTE
SEND
VOL+
VOL-
BIRD
BLUE JAY
BIRD
BLUE JAY
MUTE
SEND
VOL+
VOL-
CROWS
CROW ADUL
CROWS
CROW ADUL
2Next, press either the left or right button
view the categories. (Illustration N)
3When desired category is identied, press and
release middle button. (Illustration O)
1After the category has been chosen, scroll
left or right to view individual calls within the
category. (Illustration P)
(Illustration O)
CHOOSING INDIVIDUAL CALLS
MUTE
SEND
VOL+
VOL-
CROWS
CROW ADUL
CROWS
CROW ADUL
PAGE 9
MUTE
SEND
VOL+
VOL-
RABBIT
JACKRABB
(Illustration Q)
Press the SEND button on the remote to send
the selected sound to the main unit so it will play.
Press MUTE on the remote to pause or play the
current sound selected. (Illustration Q)
Note: Call will loop repeatedly until call is
deactivated.
(Illustration P)
CHOOSING INDIVIDUAL CALLS
MUTE
SEND
VOL+
VOL-
RABBIT
JACKRABB
PLAYING THE SOUND SELECTED
To adjust volume, press the volume up or
down buttons. (Illustration R)
(Illustration S)
(Illustration R)
VOLUME CONTROL TURN UNIT OFF
To turn unit off, press and hold middle
button until LCD display turns off.
(Illustration S)
MUTE
SEND
VOL+
VOL-
RABBIT
JACKRABB
MUTE
SEND
VOL+
VOL-
RABBIT
JACKRABB
PAGE 10
