FLIR C346ZC252 Bedienungsanleitung
On-Screen Display Guide
C346ZC252 1080p MPX
PTZ Camera
On-Screen Display
Guide
C346ZC252 1080p MPX
PTZ Camera
#LX400097; r.45718/45804; en-US iii
Thank you for purchasing this product. FLIR Systems, Inc. is committed to providing our customers with a
high quality, reliable security solution.
This manual refers to the following models:
C346ZC252
For the latest online manual, downloads and product updates, and to learn about our complete line of
accessory products, please visit our website at:
www.flir.com/security/pro
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF THE PLUG
TO THE WIDE SLOT AND FULLY INSERT.
#LX400097; r.45718/45804; en-US iv
Using the On-Screen Display
(OSD) Menu for C346ZC252
1
You can configure the camera’s advanced settings on a FLIR MPX DVR using the OSD
menu. Use the OSD menu to correct imperfections in the camera image as well as config-
ure automated PTZ functions like preset locations, patterns, and tours.
NOTE
If you have made changes in the OSD menu and you are not happy with the outcome, see 1.3.19 Camera
Factory Defaults, page 15 to reset all items in the Camera Setting menu to their default values. See 1.1.4
Restore Factory Defaults, page 3 to reset all other items in the OSD menu.
To access the OSD menu:
1. In Live View, click the channel that has the PTZ camera connected to open in full-
screen.
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and password if
prompted. The PTZ menu opens.
3. Click the arrow in the PTZ control window to show advanced controls.
4. Click . The OSD menu appears over the camera image.
5. Use the on-screen controls to configure menu items:
•Up / down arrows: Select menu items.
•Left / right arrows: Change values for menu items.
•Cancel: Exit the OSD menu.
•Enter: Confirm selection.
1.1 System Settings
Use the system settings menu to configure basic system information.
#LX400097; r.45718/45804; en-US 1
Using the On-Screen Display (OSD) Menu for C346ZC252
1
System Settings — Menu Structure:
SYSTEM INFORMATION ADDR Displays the camera address.
BR Displays the camera baud rate.
PARITY Displays the communication
parity.
VERSION Displays the PTZ firmware
version.
CAM VER Displays the camera firmware
version.
ADDR INFORMATION ADDR TYPE •HARD
•SOFT
ADDR-HARD 1
ADDR-SOFT 0–255
SAVE Save your settings.
SET NORTH Set the current viewing angle as the benchmark angle for the camera.
LANGUAGE Set the language for the OSD menu.
VIDEO OUTPUT •CVI
•TVI
•AHD
•SD (CVBS)
FACTORY DEFAULT Restore the camera system settings to their original, out-of-the-box
state. Exposure, language, and video output settings are not affected
when you restore the camera system settings.
RESTART Reboot the PTZ camera. OSD settings are not affected when you re-
boot the camera.
1.1.1 System Information
NOTE
The information in this section is for service purposes only.
The system information menu displays the PTZ protocol information, including the camera
address, baud rate, parity, and firmware version numbers. The information in this section
is for reference and cannot be configured through the OSD menu.
#LX400097; r.45718/45804; en-US 2
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.1.2 Address (ADDR) Information
NOTE
The information in this section is for service purposes only.
The address information menu lets you choose how the camera address is determined.
The camera address is how standard definition DVRs identify PTZ cameras. Under ADDR
TYPE, select HARD to have the address determined by the DIP switches inside the cam-
era housing, or SOFT to select the address using the software (select the address value
under ADDR-SOFT).
1.1.3 Video Output
Change the camera’s video format to be compatible with your analog recorder.
To change the camera’s video format:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Under VIDEO OUTPUT, click the left / right arrow keys to select the video format of
your preference.
1.1.4 Restore Factory Defaults
Restore the camera module to its out-of-the-box state. This will reset all menu items ex-
cept those in the CAMERA SETTING menu back to their default values.
CAUTION
This step cannot be undone.
To restore camera factory defaults:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Select FACTORY DEFAULT and click Enter.
#LX400097; r.45718/45804; en-US 3
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.1.5 Camera System Restart
Restarts the camera system. The camera powers off and then resumes normal function.
NOTE
Restarting the camera system does not affect OSD menu settings.
To restart the camera module:
1. Use the on-screen arrow keys to navigate to SYSTEM SETTING and click Enter.
2. Select RESTART and click Enter.
1.2 Display Settings
Use the display settings menu to choose what information appears over the camera image.
Display Settings — Menu Structure:
PRESET TITLE ON / OFF
AZIMUTH DISP ON / OFF
TIME DISP ON / OFF
POSITION ON / OFF
ZOOM DISP ON / OFF
INSIDE TEMP •°C
•°F
•OFF
TITLE DISP ON / OFF
PATTERN DISP ON / OFF
RS485 DETECT ON / OFF
To configure the display settings:
1. Use the on-screen arrow keys to navigate to DISPLAY SETTING and click Enter.
2. Under PRESET TITLE, select ON to show the preset title on the video display, or se-
lect OFF to hide.
3. Under AZIMUTH DISP, select ON to show the camera’s coordinates on the video dis-
play, or select OFF to hide.
4. Under TIME DISP, select ON to show the camera’s time on the video display, or select
OFF to hide.
5. Under POSITION, select ON to show the angle between the camera’s current position
and the benchmark position on the video display (for details on setting benchmark po-
sition, see 1.1 System Settings, page 1), or select OFF to hide.
6. Under ZOOM DISP, select ON to display the camera’s current zoom amount, or select
OFF to hide.
7. Under INSIDE TEMP, select °F or °C to show the camera’s internal temperature on the
video display, or select OFF to hide.
8. Under TITLE DISP, select ON to show the camera title / name on the video display, or
select OFF to hide.
9. Under PATTERN DISP, select ON to display the currently enabled pattern, or select
OFF to hide.
10. Under RS485 DETECT, select ON to display the camera’s PTZ protocol information,
or select OFF to hide.
#LX400097; r.45718/45804; en-US 4
Using the On-Screen Display (OSD) Menu for C346ZC252
1
1.3 Camera Settings
Use the camera settings menu to adjust the camera image.
Camera Settings — Menu Structure:
WB SETTING WB MODE •AUTO
•ATW
•INDOOR
•OUTDOOR
•NA LAMP
•NA LAMP AUTO
•MANUAL
•NATURAL
R GAIN 0–100
B GAIN 0–100
EXPOSURE
SETTING
AE MODE •AUTO
•MANUAL
•IRIS PRIO
•SHUT PRIO
GAIN
SETTING
1–16
SHUTTER 1/4 – 1/30,000
IRIS
SETTING
1–18
EXPOSURE
COMP
1–15
BLC ON / OFF
NR 1–15, OFF
CAMERA 3D
NR
1–15, OFF
NEXT PAGE HIGH
LIGHT
REDUCE
1–4, OFF
AE RE-
COVERY •5M
•15M
•30M
•1H
•2H
•OFF
WDR
SETTING
WDR MODE 1–15, OFF
DAY/NIGHT
SETTING
DAY/NIGHT •TIME
•NIGHT
•DAY
•AUTO
DAY TIME Enter the time of the day you want the camera to stay in color mode.
This option is available only when you select TIME in the DAY/NIGHT
setting.
NIGHT TIME Enter the time of the day you want the camera to stay in black and
white mode. This option is available only when you select TIME in the
DAY/NIGHT setting.
SAVE Save your settings
#LX400097; r.45718/45804; en-US 5
Using the On-Screen Display (OSD) Menu for C346ZC252
1
FOCUS
SETTING
FOCUS
MODE •AUTO
•MANUAL
•SEMIAUTO
FOCUS
LIMIT •10CM
•1M
•2M
•3M
•5M
•AUTO
AF
SENSITIVITY •LOW
•MID
•HIGH
IMAGE
ADJUST
HUE 1–100
BRIGHT-
NESS
1–100
SATURATION 1–100
CHROMA
SUPPRESS
1–4
GAMMA 1–16
CONTRAST 1–100
STYLE •STANDARD
•VIVID
•SOFT
DEFOG
SETTING
DEFOG
MODE •MANUAL
•AUTO
•OFF
INTENSITY 1–3
ZOOM
SPEED
1–8
SHARPNESS 1–16
NEXT PAGE SHARPNESS
RESTRAIN
1–16
DIGITAL
ZOOM
ON / OFF
PICTURE
FLIP
ON / OFF
LENS INIT Performs a lens initialization.
PICTURE
MODE •720P / 25 — PAL
•720P / 30 — NTSC
•720P / 50 — PAL
•720P / 60 — NTSC
•1080P / 25 — PAL
•1080P / 30 — NTSC
CAMERA
MAINTAIN
ON / OFF
CAMERA
FACTORY
DEFAULT
Restores the camera to its original, out-of-the-box settings.
CAMERA
RESTART
Restarts the camera.
#LX400097; r.45718/45804; en-US 6
Inhaltsverzeichnis
Andere FLIR Sicherheitskamera Handbücher
FLIR
FLIR N357B8 SERIES Bedienungsanleitung
FLIR
FLIR MPX C347VC2 Series Bedienungsanleitung
FLIR
FLIR SyncroIP Camera Series Gebrauchs- und Pflegehandbuch
FLIR
FLIR N347BW4 SERIES Bedienungsanleitung
FLIR
FLIR MPX ME313L Bedienungsanleitung
FLIR
FLIR CP-6302-30-R Bedienungsanleitung
FLIR
FLIR FX Bedienungsanleitung
FLIR
FLIR FB-Series Bedienungsanleitung
FLIR
FLIR LOREX LW2770HAC1 Bedienungsanleitung
FLIR
FLIR Lorex LNC250 PING Series Bedienerhandbuch
FLIR
FLIR SyncroIP Camera Series Bedienungsanleitung
FLIR
FLIR P143E4 SERIES Bedienungsanleitung
FLIR
FLIR DBV533TL Bedienungsanleitung
FLIR
FLIR MPX C133BD Series Bedienungsanleitung
FLIR
FLIR Quasar CM-6206-H1-I Bedienungsanleitung
FLIR
FLIR MPX C237ED Bedienungsanleitung
FLIR
FLIR Raymarine CAM220IP Bedienungsanleitung
FLIR
FLIR Quasar Gen II Series CM-6212 H1-I Handbuch
FLIR
FLIR Quasar CM-6405 Bedienungsanleitung
FLIR
FLIR Ariel Gen IIICB-3308 Handbuch
