FLIR CP-6302-30-R Bedienungsanleitung

Quick Install Guide

Quasar Gen IlI

CP-6302-30-R

Indoor 30x HD PTZ IP Camera

A. Insert and Configure SD Card

If local recording is required to stroe snapshots and/or recordings triggered by events, an SDXC card (not supplied)

must be used.

Insert an SDXC card (up to 128GB, Class 10) in the card slot inside the camera housing (See diagram overleaf).

Replace the camera bubble when complete.

B. Mount the Camera

Verify that the operating temperature range is between -40°C ~ 50°C (-40° ~ 122°F), 0-90% relative humidity (non-

condensing).

Be sure to have the required accessories and tools available.

Refer to the User and Installation Guide for mounting instructions.

Make all required wiring connections (See connector details overleaf)

C. Accessing Camera Documentation and Utility Software from the Web

D. Install the ActiveX Plug-in

Ensure that ActiveXcontrols can be

downloaded by:

(a) Changing the ActiveX controls and

plug-in settings

(b) Setting the Internet security level to

default.

For further details, refer to the camera’s

User and Installation Guide.

To set ActiveX controls & plug-in settings:

Start Internet Explorer.

Select Tools > Internet Options from the

main menu of the browser.

Select the Security tab and click Internet.

Click Custom level to change ActiveX

settings.

Set all ActiveX controls and plug-ins

settings to Prompt or Enable.

To set the Internet Security Level:

Start Internet Explorer.

Select Tools > Internet Options from

the main menu of the browser.

Select the Security tab and click

Internet.

Click Default level.

Click OK.

Close and reopen the browser window.

1. After the request to install the ActiveX

control file (install.cab) appears on the

screen, click Yes.

2. After installing the plug-in, in the pop-up

security warning that opens, click Install

to start downloading the Quasar Player

software onto the PC.

3. Click Finish when the Quasar Player

installation is completed.

E. Connect the Camera

3-Pin Power Connector

Power

Connector

Definition

AC 24L

Ground

AC 24N

Terminal Connectors

14-pin Terminal Block

Definition

Audio-Out

Alarm-In 4

Ground (Audio I/O)

Alarm-In 3

Alarm-Out A1

Alarm-In2

Alarm-Out A2

Alarm-In 1

Alarm-Out B1

Ground

(Alarm I/O and RS-485)

Alarm-Out B2

Audio-In

RS-485 D+

RS-485 D-

1. Two-pin connector (If using a 12VDC power supply)

2. Console connector (Technician)

3. Cat 5e/Cat 6 cable from the switch to the RJ45 connector for 10/100/1000 Mbps

Ethernet and PoE+.

If using PoE, use CP-POE-60W PoE injector or equivalent. Verify that there are steady

green and flashing yellow LEDs.

4. Three-pin power connector (if using a 24VAC power supply or a heater) (See E.

Connectors)

5. Video output to a DVR (Attach coax cable to the BNC connector for video output)

6. 14-pin terminal block connector for alarm and audio in/out - Attach wires from external

devices.

7. Factory Reset Button. To reset factory defaults at any time, press the Default button for

at least 20 seconds.

8. MicroSD Card slot. (User-supplied - Min recommended 4GB, up to 128GB, Class 10)

F. Discover the Camera

The camera’s web interface should be

accessed by Internet Explorer 10 and higher

(32-bit) with the ActiveX plug-in.

Set the Camera's IP address and Video Format

1. Download and install the DNA Utility from the FLIR website as shown

above

2. Attach the unit to the same LAN segment as the computer that is

managing the unit. DNAautomaticallydiscovers the unit on the network

and displays the device’s current IP address in the Discover List.

3. Select the unit from the Discover List.

4. If using a Static IP address (as on a Latitude System), follow

the DNAinstructions to set the desired IP address.

5. On a system using DHCP, select the DHCP option in DNA.

6. To select PAL or NTSC, select the device in the Discover list,

right-click to open the context menu and clicking Change Video

Format.

5. Click Update.

G: If using Storage on the Edge

1. Use the Web interface to verify that the card status is displayed as Mounted in the System > Edge Recording > SD

Card screen.

2. Format the card.

3. Configure the camera to store snapshots and recordings from the System > Edge Recording screens.

H. Attach to VMS

Once you have completed installation and setup and found the

current IP address with DNA, use your VMS Discovery/Attach

procedures to attach the camera to your VMS.

CP-6302-30-R_QIG_v3

FLIR Systems, Inc.

Tel: +1-800-254-0632

6769 Hollister Ave.

product.enterprise.support@flir.com

Goleta, CA 93117

www.flir.com/security

Andere Handbücher für CP-6302-30-R

Dieses Handbuch passt für folgende Modelle

Andere FLIR Sicherheitskamera Handbücher

FLIR

FLIR Quasar Gen III Bedienungsanleitung

FLIR

FLIR Lorex LNC250 PING Series Bedienerhandbuch

FLIR

FLIR Lorex LWB3801-W Bedienungsanleitung

FLIR

FLIR Saros DM-695-S Bedienungsanleitung

FLIR

FLIR G300 A Bedienungsanleitung

FLIR

FLIR FX Bedienungsanleitung

FLIR

FLIR PatrolIR B Bedienungsanleitung

FLIR

FLIR P143E4 SERIES Bedienungsanleitung

FLIR

FLIR MPX ME313L Bedienungsanleitung

FLIR

FLIR Quasar CM-6206-H1-I Bedienungsanleitung

FLIR

FLIR Lorex LBV2711 Series Bedienungsanleitung

FLIR

FLIR Ariel Gen III CM-3304 Bedienungsanleitung

FLIR

FLIR T4 Series Bedienungsanleitung

FLIR

FLIR DNB14UX2 Bedienungsanleitung

FLIR

FLIR Navigator II Bedienungsanleitung

FLIR

FLIR PT-602CZ HD Bedienungsanleitung

FLIR

FLIR Lorex LNB3321 Series Bedienungsanleitung

FLIR

FLIR C237BC Bedienungsanleitung

FLIR

FLIR Ariel Gen III CM-3304-11-I Handbuch

FLIR

FLIR F-348 Bedienungsanleitung

FLIR

FLIR Quasar Gen II Series CM-6212 H1-I Handbuch

FLIR

FLIR Digimerge DPV24DLR Bedienungsanleitung

FLIR

FLIR FXV101 Bedienungsanleitung

FLIR

FLIR CB-3102 Handbuch

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung