FLIR Quasar CP-6408-21-I Bedienungsanleitung

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

Quasar™ 4K IR PTZ

CP-6408-21-I

Quick Install Guide

1. Check Contents

Make sure all of the items above are included in the camera kit.

This camera is a Class 1 Laser Product

that complies with IEC 60825-1:2014.

Caution

Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

Attention

L'utilisation des commandes ou reglages ou l'execution des procedures autres

que celles specifiees dans les presents exigences peuvent etre la cause d'une

exposition a un rayonnement dangereux.

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

2. Prepare to Install the Camera

2.1 Install FLIR Discovery Network Assistant

Download the FLIR Discovery Network Assistant (DNA) tool to a computer on the

same VLAN to which you will connect the camera, and then unzip the file. The DNA

tool does not require a license to use and is a free download from FLIR.com >

Products > Security > Visible Security Cameras > Quasar 4K IR PTZ Camera.

2.2 Perform a Bench Test (Optional)

You can test the camera or configure it for networking before mounting it. Follow

the instructions in 3.4 Connect the Camera and 4.1 Configure for Networking, and

then continue with 2.3 Select a Location.

2.3 Select a Location

Select a suitable location to mount the camera.

For advice on positioning and orienting the camera, see the camera's installation

and user guide.

Verify that the operating temperature range is between -40°C ~ 50°C (-40° ~ 122°

F), 10-90% relative humidity (non-condensing).

For the list of mounting accessories available for the camera, see the FLIR

Security Cameras - Accessory Guide.

3. Install the Camera

3.1 Fit Mounting Hardware

If required, install the mounting hardware for the camera according to the

instructions in the camera's installation and user guide.

3.2 Route Network and Power

Properly install the power and network cabling in the mounting hardware so that it is

accessible when the camera is mounted.

Power: Universal Power over Ethernet (PoE) 60W 4 pair forced mode, 12 VDC,

or 24 VAC.

Ethernet: Cat5e or Cat6 cable. Ethernet is required for streaming video and

configuring the camera.

3.3 Mount the Camera

Mount the camera according to the instructions in the camera's installation and user

guide.

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

3.4 Connect the Camera

Connectors

Connector

Connection

DC12V IN

If using a 12 VDC power supply, connect its wires to the

two-pin power connector. See pin assignment below.

Do not use the DC12V IN and AC24V IN

connectors at the same time.

LAN

Attach a Cat 5e or Cat 6 cable from the network switch

to the RJ45 connector for a 10/100/1000 Mbps Ethernet

and PoE connection. If using PoE, use a FLIR CP-POE-

4P-60W-xx injector or a switch that supports Universal

PoE 60W 4 pair forced mode. For more information

about compatible injectors and recommended switches,

contact FLIR support. Verify that the LAN connector

LEDs are steady green and flashing yellow.

AC24V IN

If using a 24 VAC power supply, connect its wires to the

three-pin power terminal block. See pin assignment

below.

Do not use the DC12V IN and AC24V IN

connectors at the same time.

DEFAULT

To reset factory defaults at any time, press the Default

button for at least 20 seconds.

14-pin

terminal block

Attach wires from external devices to the 14-pin terminal

block connector for alarm and audio in/out (see diagram

and definitions below).

VIDEO

BNC connector for analog video output.

DC12V IN

Connector

Definition

-12 VDC

+12 VDC

AC24V IN Connector

Definition

AC 24L

Ground

AC 24N

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

14-Pin Terminal Block

Definition

Audio-Out

RS-485 D-

Ground (Audio I/O)

Alarm-In 4

Alarm-Out A1

Alarm-In 3

Alarm-Out A2

Alarm-In 2

Alarm-Out B1

Alarm-In 1

Alarm-Out B2

Ground (Alarm I/O)

RS-485 D+

Audio-In

Warning!

This product contains a battery that is soldered to the PCB.

There is a risk of explosion if the battery is replaced by an

incorrect type. Do not replace the battery. The battery

should be disposed of in accordance with the battery

manufacturer’s instructions.

4. Configure the Camera

You can configure the camera using the DNA tool, the camera's web page, or a

VMS.

DNAtool

Camera's web page

Discover camera IP address

•

Configure IP address, mask, and gateway

•

Configure DNS settings, MTU, and Ethernet speed

•

Change user credentials

•

Change video format

•

Configure more than one camera at the same time

•

For more information about using a VMS to configure one or more cameras at the

same time, see the VMS documentation.

4.1 Configure for Networking

By default, DHCP is enabled on the camera and a DHCP server on the network

assigns the camera an IP address. For example, if the camera is managed by

FLIR's Horizon or Meridian VMS and the VMS is configured as a DHCP server, the

VMS automatically assigns the camera an IP address.

If the camera is managed by FLIR’s Latitude VMS or is on a network with static IP

addressing, you can manually specify the camera’s IP address using the DNA tool

or the camera's web page. The camera's default IP address is 192.168.0.250.

To configure the camera for networking using the DNA tool:

a. Make sure the camera and the PC are on the same LAN segment.

b. Run the DNA tool (DNA.exe) by double-clicking .

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

The Discover List

appears, showing

compatible

devices on the

VLAN and their

current IP

addresses.

In the DNA Discover List, verify that the camera's status is Online.

If this is the first time you are configuring the camera or if it is the first time after

resetting the camera to its factory defaults, DNA automatically authenticates the

camera with the default password for the camera's admin user (admin).

If the admin user password has been changed, you need to authenticate the

camera.

In the DNA Discover List, right-click the camera and select Login.

In the DNA - Login window, type the password for the admin user. If you do

not know the admin user password, contact the person who configured the

camera's users and passwords.

Click Login, wait for Ok status to appear, and then click Close.

In the DNA Discover List, verify that the camera's status is Authenticated.

d. Change the camera’s IP address.

Right-click the camera and select IP

Setup.

In the DNA - IP Setup window, clear

Use DHCP and specify the camera's IP

address. You can also specify the Mask

(default: 255.255.255.0) and Gateway.

Then, click Update, wait for Ok status

to appear, and then click Close.

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

4.2 Change Video Format (Optional)

By default, NTSC is the camera's video format.

To change the camera's video format to PAL using the DNA tool:

a. In the DNA Discover List, right-click

the camera and select Change Video

Format.

b. In the Change Video Format window,

select PAL.

c. Click Update, wait for Ok status to

appear, and then click Close.

For more information about using the DNA tool to configure one or more cameras,

see the DNA User Guide. While the software is open, click the Help icon .

4.3 Attach the Camera to a VMS

After you have mounted the camera and discovered or defined its IP address, you

can use VMS Discovery/Attach procedures to attach the camera to a VMS.

5. Camera Dimensions

Following are the Quasar CP-6408-21-I camera’s dimensions.

6. Register the Product

For warranty information, see https://www.flir.com/support-

center/warranty/security/flir-security-product-warranties/.

CP-6408-21-I QIG Rev 110

June 2020

This document does not contain any export-controlled information.

7. Contact Information

FLIR Systems, Inc.

6769 Hollister Avenue

Goleta, CA93117

USA

Support: https://www.flir.com/support/

product.enterprise.support@flir.com

Corporate Headquarters

27700 SW Parkway Ave.

Wilsonville, OR 97070

USA

Andere Handbücher für Quasar CP-6408-21-I

Inhaltsverzeichnis

Andere FLIR Sicherheitskamera Handbücher

FLIR

FLIR Lorex LNE3322 Series Bedienungsanleitung

FLIR

FLIR CM-3304 Handbuch

FLIR

FLIR PTZ-35x140MS Bedienungsanleitung

FLIR

FLIR Lorex LNB3321 Series Bedienungsanleitung

FLIR

FLIR HM-Series Bedienungsanleitung

FLIR

FLIR Raymarine CAM200IP Bedienungsanleitung

FLIR

FLIR FC-Series S Bedienungsanleitung

FLIR

FLIR DBV534TL Bedienungsanleitung

FLIR

FLIR PatrolIR B Bedienungsanleitung

FLIR

FLIR C133ED Bedienungsanleitung

FLIR

FLIR F-348 Bedienungsanleitung

FLIR

FLIR Saros DM Series Bedienungsanleitung

FLIR

FLIR DND13TL2 Bedienungsanleitung

FLIR

FLIR CP-6302-30-R Bedienungsanleitung

FLIR

FLIR FXV101 Bedienungsanleitung

FLIR

FLIR DNV14UX2R Bedienungsanleitung

FLIR

FLIR Quasar Gen III Handbuch

FLIR

FLIR CB-5222 Handbuch

FLIR

FLIR Raymarine CAM220IP Bedienungsanleitung

FLIR

FLIR Quasar CB-6408 Bedienungsanleitung

FLIR

FLIR Lorex LBV2531 Series Bedienungsanleitung

FLIR

FLIR Tau 640 Bedienungsanleitung

FLIR

FLIR C237BC Bedienungsanleitung

FLIR

FLIR C23 Series Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung