Floyd Total Security ICT PRT-KLCS Bedienungsanleitung

ICT PRT-KLCS Keypad

Manual

By

Table of Contents

Keypad Layout...........................................................................................................................................- 1 -

Arming via the Keypad..............................................................................................................................- 2 -

Disarming via the Keypad .........................................................................................................................- 4 -

User Notes ................................................................................................................................................- 5 -

Support .....................................................................................................................................................- 6 -

Page - 1 -

Keypad Layout

CLEAR –Logs user off of the keypad or will

refresh the DISPLAY.

ENTER –Acknowledge action, clear alarm

memory or move to the next screen.

SCROLL PADS –Use for browsing options in

the keypad.

BYPASS –Ignores a particular zone when

arming for this instance.

MEMORY –Will display alarm history to the

user.

DISARM –Will disarm the system and

indicates if the system is disarmed.

MENU –Shortcut to access the MENU

display.

FORCE –Will arm a system regardless of the

status it’s in.

ARM –Will begin the arming process or

indicate the system is armed.

STAY –Begins the stay arming process on

specified zones.

NUMPAD –Used for entering PIN codes and

commands.

Page - 2 -

Arming via the Keypad

1. If the system/area you are in is

disarmed, the DISPLAY will state

[Area Name] is DISARMED and the

disarm icon will be green.

2. Use the NUMPAD to enter in your

PIN code then press ENTER. If the

login is accepted a greeting will be

displayed before it returns to the

main menu.

Page - 3 -

3. Press the ARM key to begin the

arming process. It will be checking

the zones for faults or if any are

tripped.

4. Once the check is complete it will

begin the Exit Delay. You’ll then have

a limited time to exit the area. The

default sending is 45 seconds but

this can be changed to your

preference.

Page - 4 -

Disarming via the Keypad

1. When you trip a zone (opening a

monitored door, walking in front of a

monitored motion, etc.) Will go into

the Entry Delay by default you have

30 seconds to disarm the system.

2. To disarm the system, enter your

PIN and press ENTER. Once it

confirms that you are logged in,

press the DISARM. Depending on

your setup, you might only need to

login. It can be configured to auto-

disarm upon a valid user login at the

keypad.

3. Once disarmed, it will display

[Area Name] is DISARMED as will be

at the main menu. Another indicator

is the disarm LED will be green.

Page - 5 -

User Notes

_____________________________________________________________________________________

Page - 6 -

Support

24/7 Contact Info

952-887-1144

support@floydtotalsecurity.com

Floyd Total Security ICT PRT-KLCS Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken