Fluke 289 Bedienungsanleitung

287/289

True-rms Digital Multimeters

Users Manual

June 2007, Rev. 2, 3/09

All product names are trademarks of their respective companies.

Lifetime Limited Warranty

Each Fluke 20, 70, 80, 170, 180 and 280 Series DMM will be free from defects in material and workmanship for its lifetime. As used herein,

“lifetime” is defined as seven years after Fluke discontinues manufacturing the product, but the warranty period shall be at least ten years from

the date of purchase. This warranty does not cover fuses, disposable batteries, damage from neglect, misuse, contamination, alteration, acci-

dent or abnormal conditions of operation or handling, including failures caused by use outside of the product’s specifications, or normal wear

and tear of mechanical components. This warranty covers the original purchaser only and is not transferable.

For ten years from the date of purchase, this warranty also covers the LCD. Thereafter, for the lifetime of the DMM, Fluke will replace the LCD

for a fee based on then current component acquisition costs.

To establish original ownership and prove date of purchase, please complete and return the registration card accompanying the product, or

register your product on http://www.fluke.com. Fluke will, at its option, repair at no charge, replace or refund the purchase price of a defective

product purchased through a Fluke authorized sales outlet and at the applicable international price. Fluke reserves the right to charge for

importation costs of repair/replacement parts if the product purchased in one country is sent for repair elsewhere.

If the product is defective, contact your nearest Fluke authorized service center to obtain return authorization information, then send the

product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk

for damage in transit. Fluke will pay return transportation for product repaired or replaced in-warranty. Before making any non-warranty

repair, Fluke will estimate cost and obtain authorization, then invoice you for repair and return transportation.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE

EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-

AGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT

AUTHORIZED TO EXTEND ANY DIFFERENT WARRANTY ON FLUKE’S BEHALF. Since some states do not allow the exclusion or limita-

tion of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you. If any provision of this

warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not affect the validity

or enforceability of any other provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

5/07

Table of Contents

Title Page

Lifetime Limited Warranty............................................................................................... ii

Introduction .................................................................................................................... 1

Contacting Fluke ............................................................................................................ 1

Safety Information .......................................................................................................... 1

Hazardous Voltage......................................................................................................... 3

Symbols ......................................................................................................................... 4

Features ......................................................................................................................... 5

Understanding the Push Buttons............................................................................... 5

Using Auto Repeat .................................................................................................... 6

Understanding the Display ........................................................................................ 7

Bar Graph ............................................................................................................. 8

Status Bar Elements ............................................................................................. 8

Page Area............................................................................................................. 9

Softkey Labels ...................................................................................................... 9

Adjusting Display Contrast.................................................................................... 9

Understanding the Rotary Switch .............................................................................. 10

Using the Input Terminals.......................................................................................... 11

Controlling Meter Power................................................................................................. 12

287/289

Users Manual

Powering the Meter On and Off Manually ................................................................. 12

Battery Level Indicator .............................................................................................. 12

Automatic Power-Off................................................................................................. 12

Battery Saver Mode .................................................................................................. 12

Controlling the Backlight ........................................................................................... 13

Selecting the Range ...................................................................................................... 13

Understanding Function Menus ..................................................................................... 13

Input Alert™ Feature...................................................................................................... 15

Using the Info Button ..................................................................................................... 15

Hold and AutoHold Mode............................................................................................... 15

Measuring Crest Factor ................................................................................................. 16

Capturing Minimum and Maximum Values .................................................................... 16

Capturing Peak Values .................................................................................................. 18

Low Pass Filter (Model 289 only)................................................................................... 20

Making Relative Measurements..................................................................................... 21

Making Measurements................................................................................................... 22

Measuring AC Voltage .............................................................................................. 22

Using LoZ for Voltage Measurements (Model 289 only) ........................................... 23

Making dB Measurements ........................................................................................ 23

Measuring DC Voltage.............................................................................................. 25

Measuring AC and DC Signals ................................................................................. 26

Measuring Temperature............................................................................................ 28

Using the YFunction (Model 289 Only) ............................................................... 31

Testing for Continuity ................................................................................................ 31

Using Conductance for High Resistance Tests......................................................... 34

Measuring Capacitance ............................................................................................ 35

Testing Diodes .......................................................................................................... 36

Measuring Current .................................................................................................... 38

Contents (continued)

iii

Measuring Frequency................................................................................................ 42

Measuring Duty cycle ................................................................................................ 43

Measuring Pulse Width.............................................................................................. 45

Changing Meter Setup Options ...................................................................................... 47

Resetting Meter Setup Options.................................................................................. 47

Setting Display Contrast ............................................................................................ 47

Setting the Meter’s Language.................................................................................... 47

Setting Date and Time............................................................................................... 48

Setting Backlight and Auto Off Timeouts ................................................................... 48

Setting a Custom dBm Reference ............................................................................. 48

Disabling and Enabling the Beeper ........................................................................... 48

Enabling and Disabling the Smoothing Mode............................................................ 49

Using Other Setup Options........................................................................................ 49

Using Memory ................................................................................................................ 49

Storing Individual Measurement Data........................................................................ 49

Naming Saved Data .................................................................................................. 49

Viewing Memory Data ............................................................................................... 50

Viewing Snapshot and Summary Data ................................................................. 50

Viewing Trend Data .............................................................................................. 50

Zooming in on Trend Data .................................................................................... 51

Deleting Stored Measurement Data .......................................................................... 51

Recording Measurement Data ....................................................................................... 52

Setting up a Recording Session ................................................................................ 53

Setting the Event Threshold Value ............................................................................ 54

Starting a Recording Session .................................................................................... 54

Stopping a Recording Session .................................................................................. 54

Using Communications .................................................................................................. 55

Error Messages.............................................................................................................. 56

287/289

Users Manual

Maintenance .................................................................................................................. 57

General Maintenance................................................................................................ 57

Testing the Fuses...................................................................................................... 57

Replacing the Batteries ............................................................................................. 59

Replacing the Fuses ................................................................................................. 59

Test Lead Storage..................................................................................................... 59

In Case of Difficulty........................................................................................................ 61

Service and Parts .......................................................................................................... 62

General Specifications................................................................................................... 66

Detailed Specifications................................................................................................... 67

AC Voltage Specifications......................................................................................... 68

AC Current Specifications ......................................................................................... 69

DC Voltage Specification .......................................................................................... 70

DC Current Specifications......................................................................................... 71

Resistance Specifications ......................................................................................... 72

Temperature Specifications ...................................................................................... 72

Capacitance and Diode Test Specifications.............................................................. 73

Frequency Counter Specifications ............................................................................ 74

Frequency Counter Sensitivity .................................................................................. 75

MIN MAX, Recording, and Peak Specifications ........................................................ 76

Input Characteristics ................................................................................................. 77

Burden Voltage (A, mA, μA)...................................................................................... 78

List of Tables

Table Title Page

1. Symbols................................................................................................................................. 4

2. Push Buttons ......................................................................................................................... 5

3. Display Features ................................................................................................................... 7

4. Rotary Switch Positions......................................................................................................... 10

5. Input Terminals...................................................................................................................... 11

6. Battery Level Indicator........................................................................................................... 12

7. Trend Data Display................................................................................................................ 51

8. Recording Display ................................................................................................................. 53

9. Stopped Recording Display ................................................................................................... 55

10. Error Messages ..................................................................................................................... 56

11. Replacement Parts................................................................................................................ 62

12. Accessories ........................................................................................................................... 65

287/289

Users Manual

vii

List of Figures

Figure Title Page

1. Push Buttons ......................................................................................................................... 5

2. Display Features ................................................................................................................... 7

3. Rotary Switch ........................................................................................................................ 10

4. Input Terminals...................................................................................................................... 11

5. Function Menu....................................................................................................................... 14

6. MIN MAX Record Display...................................................................................................... 17

7. Peak Record Display............................................................................................................. 18

8. Low Pass Filter...................................................................................................................... 20

9. Relative Mode Functions....................................................................................................... 21

10. AC Voltage Measurements.................................................................................................... 22

11. dBm Display .......................................................................................................................... 23

12. DC Voltage Measurements ................................................................................................... 25

13. AC and DC Display................................................................................................................ 26

14. Temperature Measurement ................................................................................................... 28

15. Resistance Measurement...................................................................................................... 30

16. Continuity Indicator................................................................................................................ 31

17. Continuity Testing.................................................................................................................. 32

287/289

Users Manual

viii

18. Conductance Measurement.................................................................................................. 34

19. Capacitance Measurement ................................................................................................... 35

20. Diode Testing........................................................................................................................ 37

21. Current Measurement Setup................................................................................................. 40

22. Current Measurement Circuit Connection............................................................................. 41

23. Functions Allowing Frequency Measurement ....................................................................... 42

24. Frequency Display ................................................................................................................ 43

25. Duty Cycle Measurements.................................................................................................... 44

26. Duty Cycle Display................................................................................................................ 45

27. Pulse Width Measurements .................................................................................................. 46

28. Testing the Current Fuses..................................................................................................... 58

29. Test Lead Storage ................................................................................................................ 59

30. Replacing Batteries and Fuses ............................................................................................. 60

31. Replaceable Parts................................................................................................................. 64

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Fluke Multimeter Handbücher

Fluke

Fluke 28 II Ex Montageanleitung

Fluke

Fluke 233 Bedienungsanleitung

Fluke

Fluke 373 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 116 Bedienungsanleitung

Fluke

Fluke 8050A Bedienungsanleitung

Fluke

Fluke 80 Series V Bedienungsanleitung

Fluke

Fluke 1587 FC Bedienungsanleitung

Fluke

Fluke 21 Bedienungsanleitung

Fluke

Fluke LinkRunner Pro LRPRO-1000 Bedienungsanleitung

Fluke

Fluke 115 Bedienungsanleitung

Fluke

Fluke Series II Bedienungsanleitung

Fluke

Fluke 27 Bedienungsanleitung

Fluke

Fluke 8845A Bedienungsanleitung

Fluke

Fluke 73 Bedienungsanleitung

Fluke

Fluke 76 Bedienungsanleitung

Fluke

Fluke 27/FM Bedienungsanleitung

Fluke

Fluke FL8808A Bedienungsanleitung

Fluke

Fluke 8842A Bedienungsanleitung

Fluke

Fluke 10 Bedienungsanleitung

Fluke

Fluke 287 Montage- und Bedienungsanleitung

Fluke

Fluke a3002 FC Gebrauchs- und Pflegehandbuch

Fluke

Fluke CNX 3000 Bedienungsanleitung

Fluke

Fluke 8020A Bedienungsanleitung

Fluke

Fluke 8520A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Bedienungsanleitung