Fluke Premium 3 Bedienungsanleitung

Network Time Machine

Quick Start Guide: Premium 3 Model

Your Network Time Machine (NTM) comes with the software already installed and licensed.

After you have unpacked it from its shipping container, proceed as follows:

1. Install the NTM in a 19-inch rack.

2. Connect cables as shown in the figure below.

3. Turn on AC power to the storage units. Wait until all the green front panel LEDs on the disk

drives have stopped flashing (up to 3 minutes). Then turn on the processor unit.

4. When the Windows 2008 server login screen appears, login with username operator and

password ClearSight1.

5. Start the NTM application by selecting Start > All Programs > ClearSight Distributed >

ClearSight Network Time Machine Distributed Agent Manager.

6. After it launches, add the Agent:

!Host: localhost

!Username: Admin

!Password: (leave blank)

7. Connect to the Agent.

If you are using a 1 Gbps adapter, the ports will look like this:

Connect a USB

keyboard and

mouse here.

Connect the power

cables here.

Connect these Ethernet

ports to the network(s)

from which you want to

monitor, capture frames,

and perform analysis.

Connect a

monitor here.

Connect one of these

Ethernet ports to your

control network for remote

operation of this NTM.

Connect the processor to the

storage array using the black SAS

cable.

Processor Unit StorageUnits

If you are using a 10 Gbps adapter, the ports will look like this:

Contacting Fluke Networks

www.flukenetworks.com

[email protected]

+1-425-446-4519

•Australia: 61 (2) 8850-3333 or 61 (3) 9329 0244

•Beijing: 86 (10) 6512-3435

•Brazil: 11 3759 7600

•Canada: 1-800-363-5853

•Europe: +31-(0) 40 2675 600

•Hong Kong: 852 2721-3228

•Japan: 03-6714-3117

•Korea: 82 2 539-6311

•Singapore: 65-6799-5566

•Taiwan: (886) 2-227-83199

•USA: 1-800-283-5853

•Anywhere in the world: +1-425-446-4519

Visit our website for a complete list of phone numbers.

Connect a USB

keyboard and

mouse here.

Connect the power

cables here.

Connect these Ethernet

ports to the network(s)

from which you want to

monitor, capture frames,

and

erform anal

sis.

Connect a

monitor here.

Connect one of these

Ethernet ports to your

control network for remote

operation of this NTM.

Connect the processor to the

storage array using the black SAS

cable.

Processor Unit Stora

eUnits

Andere Fluke Netzwerk-Hardware Handbücher

Fluke

Fluke SimpliFiber Pro Bedienungsanleitung

Fluke

Fluke TAP-1000BT-SX Bedienungsanleitung

Fluke

Fluke STAP-BT-4X16 Bedienungsanleitung

Fluke

Fluke TAP-1000BT-BT Bedienungsanleitung

Fluke

Fluke TAP-T1E1 Bedienungsanleitung

Fluke

Fluke NetDAQ 2640A Bedienungsanleitung

Fluke

Fluke Visual UpTime Select 807-0115 Bedienungsanleitung

Fluke

Fluke OneTouch AT Bedienungsanleitung

Fluke

Fluke TAP-DS3E3 Bedienungsanleitung

Fluke

Fluke TAP-100-2X16 Montageanleitung

Fluke

Fluke AXTAP1204BT-BT Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung