Fluke FEV300 Originalbetriebsanleitung

FEV300

Electrical Vehicle Charging

Station Test Adapter

Safety Information

A Warning identies conditions and procedures that are dangerous

to the user. A Caution identies conditions and procedures that can

cause damage to the Product or the equipment under test.

WX Warning

To prevent the possibility of electric shock or personal injury:

• Read all safety information before you use the Product.

• Do not alter the Product and use only as specied, or the

protection supplied by the Product can be compromised.

• Carefully read all instructions.

• Do not use the Product if it operates incorrectly.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

• Limit operation to the specied measurement category,

voltage, or amperage ratings.

• Do not exceed the Measurement Category (CAT) rating

of the lowest-rated individual component of a Product,

probe, or accessory.

• Comply with local and national safety codes. Use

personal protective equipment (approved rubber

gloves, face protection, and ame-resistant clothes) to

prevent shock and arc blast injury where hazardous live

conductors are exposed.

3-Year Limited Warranty.

See the Users Manual for the full warranty.

PN 5361884, May 2022

Specications are subject to change without notice.

All product names are trademarks of their respective companies.

• Do not operate the Product with covers removed or the

case open. Hazardous voltage exposure is possible.

• Do not use a current measurement as an indication

that a circuit is safe to touch. A voltage measurement is

necessary to know if a circuit is hazardous.

• Remove the input signals before you clean the Product.

• Use only specied replacement parts.

• Have an approved technician repair the Product.

• Do not use cable assembly if there is damage. Examine

the cable assembly for damaged insulation, exposed

metal. Check cable assembly continuity.

• Measure a known voltage rst to make sure that the

Product operates correctly.

• Do not use the Product around explosive gas, vapor, or in

damp or wet environments.

• Do not use the Product if it is altered or damaged.

• Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

• Do not use cable assembly if they are damaged. Examine

the cable assembly for damaged insulation and measure

a known voltage.

• Use only accessory supplied with the Product.

• Only connect the Product to the charging stations as

indicated in the Specication section.

• Use the Product within the operating range only. The

operating range is specied in the Specication section.

Symbols

Symbol Description

WWARNING. RISK OF DANGER.

XWARNING. HAZARDOUS VOLTAGE.

Risk of electric shock.

Consult user documentation.

JEarth

TDouble Insulated.



Measurement Category II is applicable to test and

measuring circuits connected directly to utilization points

(socket outlets and similar points) of the low-voltage

MAINS installation.

PE PE Protective Earth.

CP CP Control Pilot.

Vehicles not requiring ventilation for indoor charging

areas.

Vehicles requiring ventilation for indoor charging areas.



This product complies with the WEEE Directive and its

marking requirements. The a󰀩xed label indicates that

you must not discard this electrical/electronic product

in domestic household waste. Do not dispose of this

product as unsorted municipal waste. For information

about take-back and recycling programs available in

your country, see the Fluke website.

Contact Fluke

Fluke Corporation operates worldwide. For local contact information,

go to our website: www.uke.com

To register your product, view, print, or download the latest manual

or manual supplement, go to our website.

Fluke Corporation Fluke Europe B.V

P.O. Box 9090 PO Box 1186

Everett, WA 98206 5602 BD EINDHOVEN

U.S.A. The Netherlands

Specications

General Features

Input voltage .......................... Up to 250 V (single phase system) /

up to 480 V (three phase system),

50/60 Hz, max 10 A

Internal power consumption . . 3 W max.

FEV300-CON-TY2 Plug ........ AC charging mode 3, suitable to

IEC 62196-2 type 2 socket outlet or

xed cable with vehicle connector

(type 2, 7P three-phase)

FEV300-CON-TY1 Plug ........ AC charging mode 3, suitable to

IEC 62196-2 type 1 or SAE J1772

with vehicle connector (type 1, 5P

single-phase)

Dimensions (H × W × D) ....... 110 mm × 45 mm × 220 mm

(4.3 in × 1.8 in × 8.7 in) length

without connection cable and

test cable

Weight (including type 1 or

type 2 connection cable) ....... Approx. 1 kg (2.2 lb)

Safety standards ................... IEC/EN 61010-1, pollution degree 2

IEC/EN 61010-2-030, CAT II 300 V,

protection class II

Ingress protection .................. IEC 60529: IP54 (housing)

IEC 60529: IP54 (Measuring

terminals with protection caps in

place, connector/plug in connected

condition or with protection caps in

place, otherwise IP20)

Operating temperature .......... -20 °C to 40 °C (-4 °F to 104 °F)

Storage temperature ............. -20 °C to 50 °C (-4 °F to 122 °F)

Operating humidity range ...... 10 % to 85 % relative humidity

non-condensing

Storage relative humidity ...... 0 % to 85 % non-condensing

Operating altitude .................. 2000 m (6561 ft) max.

Functions

PE Pre-Test ........................... Visible indication >50 V AC/DC

between PE conductor and

touch sensor

PP Simulation ........................ Open, 13 A, 20 A, 32 A, 63 A

CP States .............................. State A, B, C, D

CP Error state “E” .................. On/o󰀨 (CP signal short-circuited

to PE)

PE Error state "F"

(Earth fault) ............................ On/o󰀨 (interruption of PE conductor)

Outputs (for test purpose only)

Measuring terminals

L1, L2, L3, N, PE ................... Max. 250/480 V, max. 10 A

CP signal output terminals .... Approx. +/-12 V

Caution: In case of wrong wiring or error of the charging station these

terminals may be hazardous.

Andere Handbücher für FEV300

Inhaltsverzeichnis

Andere Fluke Prüfgeräte Handbücher

Fluke

Fluke 718Ex 30G Bedienungsanleitung

Fluke

Fluke 724 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 635 QuickBERT-T1 Konfigurationshandbuch

Fluke

Fluke 5520A Service Bedienungsanleitung

Fluke

Fluke 5820A Bedienungsanleitung

Fluke

Fluke 719PRO Bedienungsanleitung

Fluke

Fluke CopperPro 990DSLWT Referenzhandbuch

Fluke

Fluke T50 Bedienungsanleitung

Fluke

Fluke 707Ex Gebrauchs- und Pflegehandbuch

Fluke

Fluke ScopeMeter 190-502 Gebrauchsanweisung

Fluke

Fluke 707 Bedienungsanleitung

Fluke

Fluke 5730A/03 Bedienungsanleitung

Fluke

Fluke P3860-MPA Bedienungsanleitung

Fluke

Fluke 721-1601 Gebrauchs- und Pflegehandbuch

Fluke

Fluke 719PRO Bedienungsanleitung

Fluke

Fluke 729 Pro Bedienungsanleitung

Fluke

Fluke FTK200 Bedienungsanleitung

Fluke

Fluke 712B Bedienungsanleitung

Fluke

Fluke 74X Series Gebrauchs- und Pflegehandbuch

Fluke

Fluke TS 44 PRO Stücklistenhandbuch

Fluke

Fluke A40B Bedienungsanleitung

Fluke

Fluke FTK100 Bedienungsanleitung

Fluke

Fluke T+ Bedienungsanleitung

Fluke

Fluke 9144 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung