Foc.us Quadscan Elite Bedienungsanleitung

Video Processor QuickStart Guide

1. Connect Source(s) and Display to QuadScan

Display

Device or Projector DVD

Component Composite S-Video

2. Power Up Source Devices

Input

Use

Component,

Composite or

S-Video

outputs on

your source

device.

Use the supplied DB-

15 M to DB-15 F Cable

3. Power Up QuadScan Elite and Identify Buttons

TView QuadScan

Power Switch. (on

Rack Mount units, it

may be necessary to

turn on power switch

on rear panel.

On power up, the

LED display will

read

“QUADSCAN” or

“QUADSCAN HD”

(model dependent)

Menu Scroll

up and down

buttons.

(circular list)

Arrow selection

keys (for multi

and range

selections).

MANL-0840-01 1

4. Select Your Input Source

Using the +and –menu scroll buttons, locate the LED display screen that reads:

“IN = XXXX” (example: “IN = SVHS A” = S-video input Channel A)

Choose the input you have connected to the desired source device by pressing the sand t

buttons.

Choose between (A is top row on rear panel, B is bottom row):

IN = AUTO Auto Senses Input IN = COMP A Composite Ch. A

IN = PASS VGA VGA Pass Through IN = COMP B Composite Ch. B

IN = YUV A Component Ch. A

IN = YUV B Component Ch. B

IN = SVHS A S-Video Ch. A

IN = SVHS B S-Video Ch. B

5. Select Your Output Resolution

Using the +and –menu scroll buttons, locate the LED display screen that reads:

“OUT = XXXX” (example: “OUT = XGA” = XGA Resolution 1024x768)

Choose the native resolution of your display or projector by pressing the sand tbuttons.

Consult your display device’s User Manual for native resolution. Choose between:

QUADSCAN ELITE QUADSCAN ELITE HD

OUT=VGA 640x480 OUT=XGA 1024x768

OUT=DBL TV 720x480 (NTSC) OUT=768L(N) 1366/1365/1280x768 (neg. sync)

720x576 (PAL) OUT=1024L 1024x1024

OUT=SVGA 800x600 OUT=D-ILA 1365x1024

OUT=XGA 1024x768 OUT=480P/576P 852/853x480 (NTSC)

OUT=QUAD TV 720x960 (NTSC) 852/853x576 (PAL)

720x1152 (PAL) OUT=768L(P) 1366/1365/1280x768 (pos. sync)

OUT=TRPL TV 720x720 (NTSC) OUT=720P 1280x720 (HDTV standard)

720x864 (PAL)

OUT=D-ILA 1365x1024

NOTE: ALL OUTPUTS ARE PROGRESSIVE

6. Set the Output Aspect Ratio

Using the +and –menu scroll buttons, locate the LED display screen that reads:

“OUTPUT = XXXX” (example: “OUTPUT = 4:3B” - A, B, C choice on QuadScan Elite only)

Choose the input aspect ratio that matches your source by pressing the sand tbuttons.

QUADSCAN ELITE QUADSCAN ELITE HD

OUTPUT=4:3B 4:3 aspect ratio OUTPUT=4:3 4:3 aspect ratio

OUTPUT=16:9B 16:9 aspect ratio OUTPUT=16:9 16:9 aspect ratio

7. Set the Input Aspect Ratio

Using the +and –menu scroll buttons, locate the LED display screen that reads:

“INPUT = XXXX” (example: “INPUT = 16:9”)

Choose the input aspect ratio that matches your source by pressing the sand tbuttons.

QUADSCAN ELITE& QUADSCAN ELITE HD

INPUT=16:9 16:9 aspect ratio

INPUT=4:3 4:3 aspect ratio

INPUT=4:3LB 4:3 Letterbox aspect ratio

If your source is a DVD player, make sure that your DVD player aspect ratio is set properly. See

the particular DVD disc menu for more information. For anamorphic DVDs, set the Input=16:9.

8. Make Picture Adjustments

Using the +and –menu scroll buttons, locate the LED display screen that reads:

“BRIGHT = XX” Picture Brightness Adjustment

Adjust brightness by pressing the sand tbuttons.

For standard definition TV, set the Input = 4:3.

Scroll again using the +and –menu scroll buttons and adjust for:

“CONTRAST = XX” Picture Contrast Adjustment

“SAT = XX” Picture Saturation Adjustment

“HUE = XX” Picture Hue Adjustment

We recommend the “Video Essentials” DVD or the “Avia Guide to Home Theater” for setting

these adjustments.

9. Repeat Steps for Each input Device.

Settings are saved for each individual input device.

Please note: that the front panel display will not show the same settings for each input as what

is stored in memory for Input or output aspect ratio. The front panel will show the last selected

aspect ratio setting which may not be the same as what is stored into memory. The DSP setting

must be manually changed to the desired type since this selection is not stored into memory for

each input. You may select DSP= Auto for convenience, for best performance it is

recommended to manually select the correct source material type.

For more detailed information on QuadScan Elite and QuadScan Elite HD, consult your

“QuadScan Elite User’s Guide” or check the FOCUS website at www.FOCUSinfo.com.

For technical support, contact your Focus Enhancements Dealer or Focus Enhancements Tech

Support. Call 408 370 9963 8AM-5PM PST.

FOCUS Enhancements Inc. Ph: 408 866 8300

1370 Dell Ave. Fax: 408 866 4859

Campbell, CA. 95008 USA URL: www.FOCUSinfo.com

Email: [email protected]

Andere Handbücher für Quadscan Elite

Dieses Handbuch passt für folgende Modelle

Andere foc.us Medienkonverter Handbücher

foc.us

foc.us TView Silver Bedienungsanleitung

foc.us

foc.us iTView Mac Bedienungsanleitung

foc.us

foc.us TView Gold PCI Bedienungsanleitung

foc.us

foc.us TView Micro SXGA Bedienungsanleitung

foc.us

foc.us TView Gold PCI Bedienungsanleitung

foc.us

foc.us TView Micro XGA Bedienungsanleitung

foc.us

foc.us LTV Portable Pro Bedienungsanleitung

foc.us

foc.us MCSDI-1 Bedienungsanleitung

foc.us

foc.us iTView DV Bedienungsanleitung

foc.us

foc.us Harmony 2ES Bedienungsanleitung

foc.us

foc.us Quadscan Elite Bedienungsanleitung

foc.us

foc.us FIREWRITER REMOTE Bedienungsanleitung

foc.us

foc.us MEDIACONVERTER MC-2E Bedienungsanleitung

foc.us

foc.us TView Micro SXGA Bedienungsanleitung

foc.us

foc.us HyperConverter 1024 Bedienungsanleitung

foc.us

foc.us FS453 Bedienungsanleitung

foc.us

foc.us TView PresoCard Bedienungsanleitung

foc.us

foc.us Harmony 2ES Bedienungsanleitung

foc.us

foc.us TView Gold PCI Bedienungsanleitung

foc.us

foc.us TView Gold PCI Bedienungsanleitung

foc.us

foc.us TView Micro Bedienungsanleitung

foc.us

foc.us MMC-2 Bedienungsanleitung

foc.us

foc.us iTView Mac Bedienungsanleitung

foc.us

foc.us TView Pro AV Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung