FOR-A COMFORT plus G30a Bedienungsanleitung

Blood Glucose Monitoring System

Blutzucker-Überwachungsssystem

Système de contrôle de la glycémie

Sistema per il monitoraggio della glicemia

COMFORT plus G30a

Owner’s Manual

Bedienungsanleitung

Manuel de l’utilisateur

Manuale dell’utente

EN-1

Safety Information

Read the following Safety Information thoroughly before using

the device.

• Use this device ONLY for the intended use described in this

manual.

• Do NOT use accessories which are not specied by the

manufacturer.

• Do NOT use the device if it is not working properly or

damaged.

• This device does NOT serve as a cure for any symptoms or

diseases. The data measured is for reference only. Always

consult your doctor to have the results interpreted.

• The blood glucose test strip can NOT be used for the

testing of newborns.

• Before using this device to test blood glucose, read all

instructions thoroughly and practice the test. Carry out all

the quality control checks as directed.

• Keep the device and testing supplies away from young

children. Small items such as the battery cover, batteries,

test strips, lancets and vial caps are choking hazards.

• The use of this instrument in a dry environment, especially

if synthetic materials are present (synthetic clothing,

carpets etc.) may cause damaging static discharges that

may cause erroneous results.

• Do NOT use this instrument in close proximity to sources

of strong electromagnetic radiation, as these may interfere

with the correct operation.

• Proper maintenance as well as timely calibration of the

device together with the control solution is essential in

ensuring the longevity of your device. If you are concerned

about the accuracy of the measurement, please contact

the place of purchase or customer service representative

for assistance.

KEEP THESE INSTRUCTIONS IN A SAFE PLACE

Important Information

• Severe dehydration and excessive water loss may cause

readings which are lower than actual values. If you believe

you are suering from severe dehydration, consult a

healthcare professional immediately.

• If your blood glucose results are lower or higher than usual,

and you do not have symptoms of illness, rst repeat the

test. If you have symptoms or continue to get results higher

or lower than usual, follow the treatment advice of your

healthcare professional.

• Use only fresh whole blood sample to test your blood

glucose. Using other substances will lead to incorrect

results.

• If you are experiencing symptoms that are inconsistent

with your blood glucose test results and you have followed

all instructions described in this owner’s manual, call your

healthcare professional.

EN-2

Introduction

Intended Use

This system is intended for use outside the body (in vitro

diagnostic use) by people with diabetes at home and by

health- care professionals in clinical settings as an aid to

monitor the eectiveness of diabetes control. It is intended

to be used for the quantitative measurement of glucose

(sugar) in fresh capillary (from the nger, palm, forearm, and

upper arm) blood samples. It should not be used for the

diagnosis of diabetes, or testing on newborns.

Use only heparin for anticoagulation of whole blood.

Test Principle

Your system measures the amount of sugar (glucose)

in whole blood. The glucose testing is based on the

measurement of electrical current generated by the reaction

of glucose with the reagent of the strip. The meter measures

the current, calculates the blood glucose level, and displays

the result. The strength of the current produced by the

reaction depends on the amount of glucose in the blood

sample.

• We do not recommend using this product on severely

hypotensive individuals or patients in shock. Readings

which are lower than actual values may occur for

individuals experiencing a hyperglycaemic-hyperosmolar

state, with or without ketosis. Please consult the healthcare

professional before use.

• The measurement unit used for indicating the

concentration of blood glucose can have mg/dL or mmol/L.

The approximate calculation rule for conversion of mg/dL

in mmol/L is:

mg/dL Divided by 18 = mmol/L

mmol/L Times 18 = mg/dL

For example:

1)120 mg/dL ÷ 18 = 6.6 mmol/L

2)7.2 mmol/L x 18 = 129 mg/dL approximately

EN-3

Product Overview

1. Test Slot

2. Display Screen

3. MButton

4. CButton

5. Data Port

6. Test Strip Ejector

7. SET Button

Screen Display

3 2

910

1. Low Battery Symbol

2. Test Strip Symbol

3. Blood Drop Symbol

4. Test Result

5. Face/Low/High Symbol

Memory Symbol

7. Alarm Symbol

8. Measuring Mode

9. Date

10.Time

11. Ketone Warning

12. Error Message

13. Day Average

14. Measurement Unit

EN-4

Getting Started

Initial Setup

Before using your meter for the rst time or if you change the

meter battery, you should check and update these settings.

Make sure you complete the steps below and have your

desired settings saved.

►Entering the Setting Mode.

Start with the meter o (no test strip inserted). Press SET to

turn on the meter.

BATTERY

SET

Step 1: Setting the date.

With the year ashing, press M until the correct year appears.

Press SET.

With the month ashing, press M until the correct month

appears. Press SET.

With the day ashing, press M until the correct day appears.

Press SET.

Step 2: Setting the time format.

Press M and release to select the desired time format --- 12h

or 24h. Press SET.

Step 3: Setting the time.

With the hour ashing, press M until the correct hour

appears. Press SET.

With the minute ashing, press M until the correct minute

appears. Press SET.

EN-5

Step 4: Setting the Universal Tone

You may set up Beep On, Universal Tone On and Beep O by

press Mto change it.

When Universal Tone is turned on, the meter guides you

through the blood glucose test using beep tones; it also

outputs the result as a series of beeps.

When Beep is turned o, the alarm function will remain

eective.

Step 5: Deleting the memory.

With“dEL” and“ ”symbol on the display, press Mand select “no”

to keep the results in memory then press SET to skip.

To delete all the results, press Mand select“YES”.

Then press SET button to delete all memory.“OK” is displayed

in the meter, which indicates that all data stored is deleted.

BATTERY

SET

Step 6: Setting the reminder alarm.

You may set up any or all of the reminder alarms (1-4). The

meter displays“On”or “OFF”and “ ” , press Mto turn on or

turn o to set the rst reminder alarm.

Press Mto select“On”, then press SET to set the hour. When

the hour is ashing, press Mto add an hour. Press SET to

conrm and go to minutes, press Mto add one minute. Hold

Mlonger to add faster. Press SET to conrm and go to the

next alarm setting.

EN-6

settings before shutdown.

Congratulations! You have completed all settings!

Note:

• These parameters can ONLY be changed in the setting

mode.

• If the meter is idle for 3 minutes during the setting mode, it

will switch o automatically.

Before Testing

Control Solution Testing

Our Control Solution contains a known amount of glucose

that reacts with test strips and is used to ensure your device

and test strips are working together correctly.

Test strips, control solutions, or sterile lancets may not

be included in the kit (please check the contents on your

product box). They can be purchased separately. Please make

sure you have those items needed for a blood glucose test

beforehand.

Do a control solution test when:

 you rst receive the device.

 you begin using a new vial of test strips.

 you suspect the device or test strips are not working

properly.

 your blood glucose test results are not consistent with

BATTERY

SET

If you do not want to set an alarm, press SET to skip this step.

BATTERY

SET

If you want to turn o an alarm, nd the alarm number by

pressing SET in the setting mode, press Mto change from

“ON’to“OFF”.

At the time of your alarm, the meter will beep and

automatically turn on. You can press Mto silence the alarm

and insert a test strip to begin testing. If you do not press M,

the meter will beep for 2 minutes then switch o. If you do

not want to test at this time, press Mto switch o the meter.

Press SET to turn o the meter. The meter repeats all your

EN-7

how you feel, or if you think the results are not accurate.

 you have dropped or think you may have damaged the

device.

To perform the control solution test, do the following:

Step 1: Insert the test strip to turn on the meter.

Insert the test strip into the meter. Wait for the meter to

display the test strip and blood drop symbols.

Step 2: Press C to mark this test as a control solution test.

If you press Cagain, the“QC” will disappear and this test is no

longer a control solution test.

Step 3: Apply control solution.

Shake the control solution vial thoroughly before use.

Squeeze out a drop and wipe it o, then squeeze out another

drop and place it on the tip of the vial cap. Hold the meter

to move the absorbent hole of the test strip to touch the

drop. Once the conrmation window lls completely, the

meter will begin counting down. To avoid contaminating the

control solution do not directly apply control solution onto

a strip.

Step 4: Read and compare the result.

After counting down to 0, the control solution test result will

appear on the display. Compare this result with the range

printed on the test strip vial and it should fall within this

range. If not, please read the instructions again and repeat

the control solution test.

EN-8

Testing Your Blood Glucose

Test Strip Appearance

Absorbent Hole

Apply a drop of blood

here. The blood will be

automatically absorbed.

Conrmation Window

This is where you conrm

if enough blood has been

applied to the absorbent hole

in the strip.

Test Strip Handle

Hold this part to insert

the test strip into the slot.

Contact Bars

Insert this end of the test strip

into the meter. Push it in rmly

until it will go no further.

Front

ATTENTION:

The front side of test strip with FORA

Logo should face up when inserting test

strip. Test results might be wrong if the

contact bar is not fully inserted into the

test slot.

CODE

109~165

Note:

• Do NOT test your blood.

• The control solution range printed on the test strip vial or

individual foil pack is for control solution use only. It is not a

recommended range for your blood glucose level.

• Refer to the Maintenance section for important

information about your control solutions.

Out-of-range results:

If you continue to get results that fall outside the range

printed on the test strip vial, it means that the meter and

strips might not be working properly.

Inhaltsverzeichnis

Sprachen:

Andere FOR-A Blutzuckermessgerät Handbücher

FOR-A

FOR-A MD Bedienungsanleitung

FOR-A

FOR-A G71a Bedienungsanleitung

FOR-A

FOR-A V12 Bedienungsanleitung

FOR-A

FOR-A COMFORT check G40 Bedienungsanleitung

FOR-A

FOR-A V10 Bedienungsanleitung

FOR-A

FOR-A GD20 Bedienungsanleitung

FOR-A

FOR-A Premium V10BLE Bedienungsanleitung

FOR-A

FOR-A G31 Bedienungsanleitung

FOR-A

FOR-A G20 Bedienungsanleitung

FOR-A

FOR-A MD Referenzhandbuch

FOR-A

FOR-A GD40 Bedienungsanleitung

FOR-A

FOR-A Diamond GD50 Bedienungsanleitung

FOR-A

FOR-A Diamond Mini Bedienungsanleitung

FOR-A

FOR-A TNG VOICE Bedienungsanleitung

FOR-A

FOR-A Diamond Mini Bedienungsanleitung

FOR-A

FOR-A Diamind VOICE Bedienungsanleitung

FOR-A

FOR-A G20 Bedienungsanleitung

FOR-A

FOR-A D40 DUO ultima Bedienungsanleitung

FOR-A

FOR-A V30a Merkblatt

FOR-A

FOR-A Advanced pro GD40g Bedienungsanleitung

FOR-A

FOR-A DUO ultima D40 Bedienungsanleitung

FOR-A

FOR-A Diamond PRIMA Bedienungsanleitung

FOR-A

FOR-A COMFORT pro GD40 Bedienungsanleitung

FOR-A

FOR-A TD-3261G Bedienungsanleitung

Beliebte Blutzuckermessgerät Handbücher anderer Marken

ReliOn

ReliOn Prime Bedienerhandbuch

AgaMatrix

AgaMatrix Presto Bedienungsanleitung

Polymer Technology Systems

Polymer Technology Systems A1C Now Self Check Bedienungsanleitung

Medisana

Medisana GlucoDock Bedienungsanleitung

Arkray

Arkray ASSURE PLATINUM Bedienungsanleitung

Dexcom

Dexcom G4 Professional Bedienungsanleitung

Acon

Acon On Call Bedienungsanleitung

veri-Q

veri-Q BALANCE PRO Bedienungsanleitung

Medisana

Medisana MediTouch 2 Bedienungsanleitung

Infopia

Infopia Element Bedienungsanleitung

Abbott

Abbott Optimum Xceed Bedienungsanleitung

Contour

Contour TS Bedienungsanleitung

LabStyle

LabStyle Dario Bedienungsanleitung

ACONLABS

ACONLABS ON CALL EXPRESS Bedienungsanleitung

Higi Technology

Higi Technology iGlucose Bedienungsanleitung

Bayer HealthCare

Bayer HealthCare CONTOUR NEXT Bedienungsanleitung

Accu-Chek

Accu-Chek ADVANTAGE Bedienungsanleitung

Sanofi-aventis

Sanofi-aventis BG STAR Technische Daten