Formax CT-20 Leitfaden

8/2021

Assembly, Operation & Parts Manual

First Edition

CT-20

Conveyor Stacker

SPECIFICATIONS

POWER 110 VAC 60 HZ

FUSE 1 AMP / 110V

BELT SPEED VARIABLE, 0 TO 100 FT PER MINUTE

DIMENSIONS WITH TRAY 45.5” L x 12.5” W x 25” - 34” H (from top of deck to the oor)

Capacity Up to 450 #10 Envelopes*

WEIGHT 94 LBS

UNPACKING

INSPECT FOR SHIPPING DAMAGE, MISSING PARTS AND PROPER OPERATION. REPORT SHIPPING

DAMAGE TO THE CARRIER IMMEDIATELY. SAVE THE SHIPPING CARTONS AND MATERIALS IN CASE

THEY ARE NEEDED TO FILE A SHIPPING CLAIM OR FOR FUTURE SHIPPING USE.

1. Check the outside of the carton for visible damage. Make note of any damage on the carrier’s receiving

report.

2. Open the carton.

3. Carefully remove the contents and inspect the unit for paint and structural damage.

4. Carefully check for missing parts. If damage or missing parts are noted, contact your Sales Representative

immediately. Save cartons and packing materials. They may be required to substantiate a damage claim or to

return a damaged unit.

*Capacity will vary based on thickness

SPECIFICATIONS 1

UNPACKING 1

CONTENTS 2

ASSEMBLY 3

SETUP AND OPERATION 4

PARTS 6

TABLE OF CONTENTS

COMPONENTS

1. Infeed plate

2. Stacker wheel assembly

3. Sequence stacking tray

4. Infeed guides

5. Thumbscrews

6. Infeed roller brackets

7. Conveyor

8. Stand

Front

Rear

Operator side

Non-Operator side

ASSEMBLY

1. Mount the conveyor to the stand. Turn the

conveyor up on the non-operator side and

remove the four center screws from the bottom

plate of the conveyor. Place the conveyor

ontop of the stand and align the holes. Use

the removed button head screws to mount the

conveyor to the stand.

2. Mount the Infeed Plate. Remove the three

button head screws from the front of the

conveyor and use them to mount the infeed

plate to the front of the conveyor.

3Mount the Infeed stacker wheel brackets.

Remove the four button head screws located

on the bottom side of the conveyor closest to

the front. Use the romoved screws to mount

the brackets.

3. With the brackets in position mount the infeed

stacker wheels to the bracket with the provided

thumbscrews.

4. Mount the infeed guides to the operator and

non-operator side of the conveyor with the

thumscrews provided.

The guides should be mounted so that the

ared edge is facing out and towrd the front of

the conveyor.

5. Mount the Sequesnce Stacking Tray. Remove

the ve button head screws from the rear of

the conveyor and use them to mount the tray

to the rear of the conveyor. The top of the tray

should be ush with the top of the conveyor.

SETUP AND OPERATION

1. Connect the cord to the conveyor and plug it

into the wall outlet.

2. Set the height of the conveyor to match the

outfeed of the printer/feeder. Carefully loosen

the two knobs on either side of the conveyor

stand to raise or lower the stand height, a

second person may be required. The top of

the conveyor should sit below the exit of the

printer when rolled into position.

3. Turn the black power switch to the on position.

The blue runout button will light up when the

power is in the on position.

4. Setting the stacking shingle. Use the speed

control knob to adjust the tightness of the

shingle stack. Slower speeds will create a

tighter shingle, faster speeds will increase the

shingle spacing. Adjust the stacker wheels in

or out to accomodate the envelope comong

out of the printer. Closer for smaller media

and further out for larger media.

Press and hold the blue runout button to

neatly gather media off the conveyor.

Runout Button Speed Control Power

Stacker WheelsShingle Distance

PARTS

CONVEYOR PARTS

35 34 32,33

2316

2018

3840 36,37

4 5,6,7 8 9,10

9 13

ITEM PART # DESCRIPTION QTY

1 375-5699 SCREW 10-32 X 1/4 BUTTON HD CA 19

2 360-2316 BOTTOM PAN, 36” N/P 1

3 360-3079 INFEED PLATE, CT20 1

4 320-0011 WEIGHTED STACKER WHEEL, OFP 2

5 361-8136 STACKER WHEEL ARM 2

6 380-5538 ** OPX ** NYLON PELLET 2

7 376-0077 10-32 Set Screw 4

8 332-0187 ROD, INFEED-OUTFEED WHEELS 1

9 372-0124 HAND KNOB 10-32 6

10 377-0078 NYLON WASHER .385x.75x.031 > 4

11 360-3062 SEQ TRAY CT20 STACKER 1

12 360-3081 REAR SIDE GUIDE, CT20 1

13 360-3080 FRONT SIDE GUIDE, CT20 1

14 360-3083 REAR INFEED BRACKET, CT20 1

15 360-3082 FRONT INFEED BRACKET, CT20 1

16 360-2404 DECK LF/RT 36” N/P 1

17 369-0050 TRANSPORT BELT 35” CONVEYOR 1

18 311-0023 PUSH BUTTON SWITCH 1

19 372-0061 CONTROL KNOB 1

20 319-0031 REMOTE POT 1

21 311-0051 TRAVEL/PHOTO-EYE SWITCH 1

22 360-1575 BRACKET, MOTOR 36” 1

23 365-0181 MOTOR PULLEY 22 X L037 .250 BORE 1

24 365-0167 PULLEY DRIVEN 1

25 365-0173 TIMING BELT,70 GRV,X.375 W,1/5 PT 1

26 313-0043 MOTOR 12 VDC 1

27 310-0134 PHOTO EYE W/ HARNESS 1

28 395-0751 STACKER SPOOL ASSY. WITH TIMING PULLEY 1

29 360-1586 BRACKET, SHAFT 1

30 395-0829 IDLER SHAFT ASSY 1

31 390-1424 P.C.B. 12 VDC MOTOR CONTROL 120 Volt 1

32 317-0006 FUSE HOLDER 1

33 317-5183 1 AMP FUSE 110 Volt 1

34 319-1052 AC POWER OUTLET 1

35 319-0096 IEC POWER INLET 1

36 310-0327 MOTOR HARNESS 1

37 310-0328 LINE VOLTAGE HARNESS 1

38 490-0022 MODULATED BEAM PCB 1

39 360-1580 BRACKET,RLR ADJUST 36' 1

40 395-0750 STACKER SPOOL ASSY. WITH OUT TIMING PULLEY 1

CONVEYOR PARTS

STAND PARTS

Inhaltsverzeichnis

Andere Formax Büroausstattung Handbücher

Formax

Formax FD 452 Bedienungsanleitung

Formax

Formax FD 4170 Bedienungsanleitung

Formax

Formax FD 402TA1 Bedienungsanleitung

Formax

Formax FD 150 Bedienungsanleitung

Formax

Formax 6204 Series Bedienungsanleitung

Formax

Formax FD 100 Bedienungsanleitung

Formax

Formax FD 210M Bedienungsanleitung

Formax

Formax FD 260 Bedienungsanleitung

Formax

Formax FD 90 Bedienungsanleitung

Formax

Formax FlashCard Bedienungsanleitung

Formax

Formax 6404 Series Bedienungsanleitung

Beliebte Büroausstattung Handbücher anderer Marken

silen

silen Space 2 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products LD Series Bedienungsanleitung

SHFL

SHFL DECK MATE BLACKJACK Bedienungsanleitung

DROMEAS

DROMEAS LINE Bedienungsanleitung

Siemens

Siemens HIPATH 2000 Bedienungsanleitung

VITRA

VITRA Stefan Hürlemann Dancing Wall Bedienungsanleitung

BISLEY

BISLEY Glide V2 Bedienungsanleitung

fully

fully Haven Bedienungsanleitung

Plus

Plus NF-20 Bedienungsanleitung

OCEE DESIGN

OCEE DESIGN SASS-0100 Bedienungsanleitung

NanaWall

NanaWall CSW75 Bedienungsanleitung

Vivo

Vivo DESK V000C Bedienungsanleitung

ABB

ABB 2TKA002145G1 Bedienungsanleitung

PolyVision

PolyVision Flow Bedienungsanleitung

MBM

MBM FC-10 Bedienungsanleitung

Wiremold

Wiremold V2400 Series Bedienungsanleitung

Vivo

Vivo PP-3-T072D Bedienungsanleitung

BuzziSpace

BuzziSpace BuzziNest Booth Bedienungsanleitung