Fortinet FortiMail-100 Bedienungsanleitung
POWER
STATUS
4321
LINK / ACT
10/100
Back
Internal Interface,
switch connectors
1,2,3,4
Power
Connection
USB
(future)
1234
DC+12V
USB
RS-232 Serial
Connection
Ethernet Cables:
Orange - Crossover
Grey - Straight-through
Null-Modem Cable
(RS-232) Documentation
Front
Power Cable Power Supply
Power LED
Status LED Interface
status LEDs
FortiGate- 30B
oolsand Documenation
Copyright2008 Fortinet Incorporated. All rights reserved.
Trademarks
Welcome|Bienvenue | Willkommen | ᱑ㄫ | Bienvenido | Benvenuto
1234
USB
CONSOLE
400B
QuickStart Guide
For more information
• Documentation CD: all major FortiMail documents
• Fortinet Technical Documentation: http://docs.fortinet.com
• Fortinet Knowledge Base: http://kb.fortinet.com
• Fortinet Technical Support: http://support.fortinet.com
• Fortinet Training Service: http://campus.training.fortinet.com
LED State Description
Power On The FortiMail unit is on.
Off The FortiMail unit is off.
Status On The FortiMail unit is running
normally.
100/1000 On Port connected at up to 100 Mbps.
Off Port connected at 10 Mbps.
Link Act
Flashing Network activities on the FortiMail
unit.
On Port connected.
© Copyright 2010 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks or registered
trademarks of their respective holders.
Regulatory Compliance
FCC Class A Part 15, CE, and UL
Version 4.0
9 February 2010
http://www.fortinet.com
POWER
STATUS
4321
LINK / ACT
10/100
QuickStart Guide
FortiMail-100
Installation and configuration of the FortiMail unit involves the
following steps:
1. Place the unit on a stable surface.
2. Connecting the unit to the network. For details, see the
FortiMail Install Guide.
3. Powering up the unit. See instructions below.
4. Connecting to the web-based manager. See instructions
below.
5. Selecting an operation mode: Gateway, Transparent, or
Server. For details, see the FortiMail Install Guide.
6. Running the QuickStart wizard to configure the basic settings.
For details, see the FortiMail Install Guide.
7. For all other installation instructions, see the FortiMail Install
Guide on the documentation CD.
8. For all the configuration instructions, see the FortiMail
Administration Guide and the FortiMail online help.
9. If you want to use the CLI commands to configure the unit, see
the FortiMail CLI Reference on the documentation CD.
Connector Type Speed Protocol Description
Port 1 to 4 RJ-45 10/100Base-T Ethernet Connection to the network.
CONSOLE DB-9 9600 bps RS-232 serial Connection to the management computer.
Provides access to the command line interface (CLI).
Package Contents
Installation Overview
Collecting Information
Interface settings General settings
Factory default settings
Port 1: IP: ____.____.____.____
Netmask: ____.____.____.____
Port 2 IP: ____.____.____.____
Netmask: ____.____.____.____
Port 3: IP: ____.____.____.____
Netmask: ____.____.____.____
Port 4 IP: ____.____.____.____
Netmask: ____.____.____.____
Transparent
mode Management IP: ____.____.____.____
Administrator
password:
Network
Settings:
Default Gateway: ____.____.____.____
Primary DNS Server: ____.____.____.____
Secondary DNS Server: ____.____.____.____
Default mode Gateway mode
Administrator
account on Port 1
User name/
Password: admin/(No password)
Web-based
manager URL: https://192.168.1.99/admin
Management
Access HTTPS, Ping, SSH
Deploying the FortiMail unit
Now that the FortiMail unit is up and running, you can start to
deploy the unit into your network by configuring the system
settings and mail settings. The FortiMail Install Guide will help you
with this task.
Configuring the FortiMail unit
Then you can configure detailed antispam, antivirus, and logging
settings to protect your mail servers and users. For details, see
the FortiMail online help or the FortiMail Administration Guide on
the documentation CD.
The web-based manager has two display modes: Basic and
Advanced. The default mode when you first log on is Advanced.
You can switch between the two modes by clicking
Basic Mode >> or Advanced Mode >>.
In either mode, you can run the quick start configuration wizard to
configure the basic network and antispam settings. For detailed
information about the quick start wizard, see the FortiMail Install
Guide.
Configuration changes made with the web-based manager are
effective immediately.
The FortiMail unit has the operation mode: gateway, transparent,
and server. For details about operation modes and which mode
you should use, see the FortiMail Install Guide.
The default operation mode is gateway mode. You can change to
transparent mode or server mode after connecting to the unit.
Changing operation mode causes system reboot.
To connect to the web-based manager, you need:
• An Ethernet connection between the FortiMail unit and your
management computer.
• A web browser such as Firefox or Internet Explorer with Adobe
Flash Player 10 or greater plug-in.
To connect to the web-based manager for the first time
1. On your management computer, configure the Ethernet port
with the static IP address 192.168.1.2 and a netmask of
255.255.255.0.
2. Using the Ethernet cable, connect you computer’s Ethernet
port to the FortiMail unit’s port 1.
Use a cross-over Ethernet cable to connect the devices
directly. Use straight-through Ethernet cables to connect the
devices through a hub or switch.
3. Start your web browser and go to https://192.168.1.99/admin
(include the “s” in https:// and “/admin” after the IP address).
4. Type
admin
in the Name field and select Login.
5. Go to Monitor > System Status > Status (the dashboard) to
set the operation mode. The system will reboot.
6. Log on to the system again.
7. Click Quick Start Wizard to run the quick start configuration
wizard and follow the steps to configure the system’s basic
network and antispam settings.
You can use one of the following tools to configure the FortiMail unit. If you are connecting and using the unit for the first time, it is
recommended you use the web-based manager only, because it comes with a quick start configuration wizard which can guide you
through the initial setup.
• Web-based manager
The web-based manager is an easy-to-use management tool that you can access from a web browser.
• Command Line Interface (CLI)
The FortiMail unit has a console port and you can use a console cable to connect it directly to your management computer. For
information about CLI commands, see the FortiMail CLI Reference on the documentation CD.
Powering On
Next Steps
To power on the FortiMail unit
1. Ensure the unit is placed on a stable surface.
2. Ensure the power is not connection.
3. Connect the network cable to port 1.
4. Connect the power cable.
Straight-through Ethernet cable connects
to hub or switch on the network.
Power cable connects
to power supply.
1234
DC+12V
USB
Optional null modem cable connects to
serial port on management computer.
Using the web-based manager
Configuration Tool Overview
Andere Handbücher für FortiMail-100
3
Andere Fortinet Netzwerk-Hardware Handbücher
Fortinet
Fortinet FortiGate ASM-S08 Bedienungsanleitung
Fortinet
Fortinet FortiBalancer 2000 Bedienungsanleitung
Fortinet
Fortinet FortiMail 2000F Bedienungsanleitung
Fortinet
Fortinet FortiLog-100 Bedienungsanleitung
Fortinet
Fortinet FortiAnalyzer-4000B Bedienungsanleitung
Fortinet
Fortinet FortiWAN 1000B Bedienungsanleitung
Fortinet
Fortinet FortiManager 400G Bedienungsanleitung
Fortinet
Fortinet FortiGate 4800F Series Bedienungsanleitung
Fortinet
Fortinet FortiAP 431F Bedienungsanleitung
Fortinet
Fortinet FortiGate 600F Series Bedienungsanleitung
Fortinet
Fortinet FortiSIEM FSM-500G Bedienungsanleitung
Fortinet
Fortinet FortiGate 2600F-DC Bedienungsanleitung
Fortinet
Fortinet FortiGate 400F Series Bedienungsanleitung
Fortinet
Fortinet FortiGate-5000 Referenzhandbuch
Fortinet
Fortinet FortiGate FortiGate-1000A Bedienungsanleitung
Fortinet
Fortinet FortiGate 100F Series Bedienungsanleitung
Fortinet
Fortinet FortiMail 3000F Bedienungsanleitung
Fortinet
Fortinet FortiSwitch M426E-FPOE Bedienungsanleitung
Fortinet
Fortinet FortiGate-7000F Series Stücklistenhandbuch
Fortinet
Fortinet FortiGate 3700F Series Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
