Fortinet FortiAP-221B Bedienungsanleitung
FortiAP-221B
QuickStart Guide
December 28, 2011
20-430-155733-20111228
© Copyright 2011 Fortinet, Inc. All Rights Reserved. Contents
and terms are subject to change by Fortinet without prior notice.
No part of this publication may be reproduced in any form or by
any means or used to make any derivative such as translation,
transformation, or adaptation without permission from Fortinet,
Inc., as stipulated by the United States Copyright Act of 1976.
Trademarks
ABACAS, APSecure, Dynamic Threat Prevention System (DTPS),
FortiAnalyzer®, FortiASIC, FortiAuthenticator, FortiBalancer,
FortiBIOS, FortiBridge, FortiCache, FortiCarrier, FortiClient®,
FortiDB™, FortiGate®, FortiGate Unified Threat Management
System, FortiGuard®, FortiGuard-Antispam, FortiGuard-
Antivirus, FortiGuard-Intrusion, FortiGuard-Web, FortiLog,
FortiMail®, FortiManager®, Fortinet®, FortiOS®, FortiPartner,
FortiProtect, FortiReporter, FortiResponse, FortiScan, FortiShield,
FortiVoIP, FortiWeb, and FortiWiFi are trademarks of Fortinet,
Inc. in the United States and/or other countries. The names of
actual companies and products mentioned herein may be the
trademarks of their respective owners.
Table Of Contents
1Package Contents
2Mounting Your FortiAP Unit
3Connecting Your FortiAP Unit
4Configuring Your FortiAP Unit
5Technical Specifications
6LED Specifications
7Technical Documentation and Links
8Cautions and Warnings
9Register Your Product
10 Product License Agreement
FortiAP-221B
QuickStart Guide
QuickStart
Guide
Mounting Bracket
Wall/Ceiling Mounting
Hardware Kit
T-Rail Mounting
Hardware Kit
1. Package Contents
Fortinet’s FortiAP wireless thin access points deliver secure, identity-driven WiFi
client access that creates a fortified WLAN network that is centrally managed by a
FortiGate or FortiWiFi platform.
Your box contains the following:
FortiAP-221B
QuickStart Guide (with Mounting Template)
Mounting Bracket
T-Rail Mounting Hardware Kit
Wall/Ceiling Mounting Hardware Kit
Using the provided hardware, the FortiAP unit can be attached to a ceiling or wall.
To attach the unit to a ceiling or wall using the mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using the mounting template and the
provided wall/ceiling mounting hardware kit.
2. Insert the provided short screws into the bottom cover of the FortiAP unit.
Leave enough of the screws exposed to ensure that the unit can be attached to the
mounting bracket.
If extra space is required, use the provided spacers and long screws from the T-Rail
mounting hardware kit to increase the space between the unit and the mounting
bracket.
3. Mount the FortiAP unit on the mounting bracket by rotating the unit clockwise about
90 degrees to secure it in place.
Mounting Anchor
P3.5x32 Screw
P2.6x12 Screw
Mounting Bracket
Rotate clockwise to
secure the unit in place
Installation
Template
Wall or Ceiling
2. Mounting Your FortiAP Unit
To attach the unit to a ceiling using the provided T-rail connectors:
1. Attach the T-rail connectors to the bottom cover of the FortiAP unit using the provided
short screws.
Two sizes of T-rail connectors are included in the mounting hardware kit: 15/16in
(2.38cm) and 9/16in (1.43cm).
If extra space is required to accommodate drop ceiling tiles, use the provided
spacers and long screws.
2. Line up the connected T-rail connectors with an appropriately sized rail and press the
unit onto the rail until it snaps into place.
Note: To protect your FortiAP unit, use the Kensington security slot to attach a cable lock
(cable lock is not included).
P2.6x25 Screw
P2.6x10 Screw
Spacer
Clip
Clip
Clip
T-rail
Kensington
Security Slot
The FortiAP unit can be powered using Power over Ethernet (PoE) or with the
optional AC power adapter. Please order either the Fortinet Gigabit PoE Injector
(SKU: GPI-115) or the 12V AC power adapter (SKU: SP-FAP221B-PA)
Caution: This device complies with IEEE 802.3af PoE specification. Do not use
any PoE injectors that are not IEEE 802.3af compliant as they may damage your
device.
To connect the FortiAP unit:
1. Insert an Ethernet cable into the Ethernet port of the FortiAP unit.
2. Insert the other end of the Ethernet cable into your FortiGate or FortiWifi unit.
If you are using PoE, ensure that the Ethernet cable is connected to an
applicable port on your FortiGate unit, FortiSwitch unit, or PoE injector.
3. If you are not using PoE, connect a region-specific AC plug adapter to the
optional power adapter by inserting the round disk into the adapter and
rotating clockwise until you hear the disk lock in place. Then insert the DC
plug of the power adapter into the DC power jack on the FortiAP unit.
Note: For FortiWifi units, the wireless controller feature is only supported on units
running FortiOS 4.0 MR3 and higher.
Caution: This equipment is to be connected only to PoE networks without
routing to the outside plant.
3. Connecting Your FortiAP Unit
The FortiAP unit is designed to require no configuration in most networks. Zero
Configuration mode works if the unit is directly connected to the FortiGate or
FortiWifi performing the Wireless LAN Controller (WLC) functions, or on the same
layer-2 network and subnet as the FortiGate or FortiWifi unit.
To enable the FortiAP using Zero Configuration:
1. After connecting the FortiAP unit as described on page 4, the unit goes
through its boot procedure and requests an IP address from the DHCP server.
2. If the IP address is retrieved successfully, the FortiAP enters discovery mode
to locate a FortiGate or FortiWifi wireless controller. The discovery modes are:
• Broadcast
• Multicast
• DHCP option 138
3. If this is the first time connecting the FortiAP to the controller, only the power
and status LEDs are lit. If the FortiAP has been pre-provisioned in the controller,
the WiFi LED is also lit.
4. Verify that the FortiAP has successfully connected to the controller.
In the FortiGate Web-based Manager, go to WiFi Controller > Managed
Access Points > Managed FortiAP. A successfully discovered unit displays a
half-filled circle symbol.
5. Select the access point and click Edit.
6. In the Admin field, select Enable.
7. In the AP Profile field, select a profile from the list and click OK.
The configuration is downloaded from the wireless controller to the FortiAP
and the WiFi LED lights up.
For more information, see the Deploying Wireless Networks Guide, available on
Fortinet’s documentation website, http://docs.fortinet.com.
4. Configuring Your FortiAP Unit
WiFi Ethernet Status
Reset Button DC Power
Jack
Ethernet
Port
Kensington
Security Slot
Interface Type Protocol Description
Ethernet Port RJ-45 Gigabit Ethernet Ethernet port with PoE support up to 12.9W, IEEE
802.3af.
Reset Button Hold for 5 seconds to reset the FortiAP unit to its
factory defaults.
Hardware Specication Description
WiFi Radios One 2.4/5GHz A/B/G/N and one 2.4GHz B/G/N
Memory 64MB (DDR2)
Flash 16MB
Kensington Security Slot Anti-theft security slot for attaching a lock-and-cable apparatus.
Optional Power Adapter Adapter Input: 100-240V, 50/60Hz, 0.6A
Output: 12V DC, 1.5A, center positive
Optional PoE Injector Fortinet Gigabit PoE Injector, GPI-115
Indoor/outdoor Deployment Indoor only.
5. Technical Specifications
LED State Description
Ethernet Port
Off No link established.
Flashing Green Link activity.
Amber Connected at 10/100 Mbps (fast Ethernet).
Green Connected at 1000 Mbps (Gigabit Ethernet).
Status
Off No power.
Flashing Green The unit is on.
Amber The FortiAP unit is booting from a factory reset, or the FortiGate
wireless controller has been found but this FortiAP unit is not
being managed.
Green The unit is being managed by a FortiGate wireless controller.
Flashing Amber Error or fault in connecting to the FortiGate wireless controller.
W i fi
Off Wireless interface is disabled or off.
Green At least one radio is enabled.
Flashing Green Wireless interface is active.
6. LED Specifications
WiFi Ethernet Status
Inhaltsverzeichnis
Andere Fortinet Netzwerk-Router Handbücher
Fortinet
Fortinet FortiExtender 101F Bedienungsanleitung
Fortinet
Fortinet FortiToken 200 Bedienungsanleitung
Fortinet
Fortinet 548B Bedienungsanleitung
Fortinet
Fortinet FortiExtender 201F Bedienungsanleitung
Fortinet
Fortinet FortiGate 40F Series Bedienungsanleitung
Fortinet
Fortinet FortiGate-40C-LENC Bedienungsanleitung
Fortinet
Fortinet FortiExtender 200F Bedienungsanleitung
Fortinet
Fortinet FortiGate 60 Bedienungsanleitung
Fortinet
Fortinet FortiExtender 202F Bedienungsanleitung
Fortinet
Fortinet FortiWLM 1000D Bedienungsanleitung
Fortinet
Fortinet FortiAP-C24JE Bedienungsanleitung
Fortinet
Fortinet FortiWiFi 80F Series Bedienungsanleitung
Fortinet
Fortinet FortiGate-40C Bedienungsanleitung
Fortinet
Fortinet FortiGate-111C Bedienungsanleitung
Fortinet
Fortinet FortiGate 30E Betriebsanleitung
Fortinet
Fortinet FortiGate 60D Bedienungsanleitung
Fortinet
Fortinet FortiExtender 212F Bedienungsanleitung
Fortinet
Fortinet FortiBridge FortiBridge-1000F Bedienungsanleitung
Fortinet
Fortinet FortiWAN Bedienungsanleitung
Fortinet
Fortinet FortiExtender 511F Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise