Foscam FI8918W Bedienungsanleitung

Quick Installation Guide FI8918W

Quick Installation Guide-For MAC users

Packing List

1) IP CAMERAX 1 2) Wi-Fi Antenna (only available for wireless model)

3) DC Power Supply X 1 4) Network Cable X 1

5) Mounting bracket ×1 6) CD X 1 (Include user manual、IP camera tool)

7) Quick Installation Guide X 1

QuickInstallationGuideFlowChart

Hardware Installation

DDNS Service Settings

Wireless LAN Settings

Software Installation

1HardwareInstallation

(1) Open the package

- 1 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Figure 1.0

(2) Connect the Antenna.

Screw the antenna to the back of the camera, make it attached well.

Figure 1.1

(3) Plug the network cable and power.

Use network cable connects with the camera and your router. Plug in the power.

The network light will blink and the camera will pan/tilt. Power light will turn on too.

Figure 1.2

- 2 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

2SoftwareInstallation

Please put the small CD in your CD driver of your laptop and find the folder “For

MAC”, then open the folder “IP Camera Tool”. Copy the IP camera tool to your

MAC and you can use the tool.

3 Login the camera

Dbclick the IP Camera Tool and you could see the following picture.

Figure 1.3

The IP camera tool could find the cam’s IP automatically after you plug the

network cable. If not, Please make sure that DHCP is enabled in your router.

Don’t enable MAC address filter. Or disable firewall or antivirus to try again.

Dbclick the IP address on the IP camera tool and you will enter the login UI.

- 3 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Figure 1.4

Fill in user name and password and choose the second login.

Figure 1.5

The browser will prompt you enter the camera’s user name and password. Please

fill in admin and choose Log in. You can see the device status.

- 4 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Figure 1.6

Click Live Video. You can see living video.

Figure 1.7

4 Wireless LAN Settings

(1) Please choose Device Management and click Wireless LAN Settings.

Then choose Using Wireless LAN.

Click Scan button and the camera will detect WIFI device around it.

It could also find your router and show it in the list. (Figure 1.9)

- 5 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Figure 1.8

If the camera could not find some WIFI device, please click the scan button again.

Make sure that the time between the first scan and the second scan is more than

1~2 minute.

Figure 1.9

(2) Click the SSID of your router in the list, the corresponding information (SSID

& Encryption) will be filled in the following boxes automatically.

You only need fill in share key.

Figure 2.0

- 6 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Make sure that SSID, Encryption and share key are exactly the same with your

router.

Figure 2.1

Figure 2.2

Please click Submit after finish these settings, the camera will reboot.

- 7 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Plug out the network cable after you click submit about 10 seconds.

The camera will work on WIFI after reboot.

Note: If your camera could not connect WIFI, please see FAQ in user manual.

5 DDNS Service Settings

5.1 Static IP user

Static IP users need not set DDNS service settings for remote access. When

finished the connection of camera in LAN and port forwarding. (Figure 3.6/3.7)

You can access the camera directly from Internet by the WAN IP and port number.

There are two ways to obtain your WAN IP.

Obtain the WAN IP from Website

Please enter these strings in your browser: http://www.whatismyip.com.The

webpage at this address will show you the current WAN IP.

Figure 2.3

Obtain the WAN IP address from the router

You can find the WAN IP in your router. Normally, it is in system status.

Take the WRT54G router of LINKSYS for example,

1) Obtain the IP address of the router(LAN gateway address),user name and

password for login the router from the network administrator,

2) Enter the LAN IP address of the router (LINKSYS WRT54G, such as:

default LAN IP is 192.168.1.1) in the address bar of the IE to login the router;

Open the Status page to find out the WAN address of the router. In this

example, the address is 183.37.28.254.

Access the IP Camera from the Internet

You can access the IP Camera from the Internet. (remote access)

Enter WAN IP address and port number in the browser to login the camera.

For example: Http:// 183.37.28.254:85

- 8 -

http://www.chargerbuy.com

Quick Installation Guide FI8918W

Note: Make sure the Port mapping is success. You can do port mapping by two

ways.

1) Enter setting page of the router which camera connect with to enable

UPNP function. Then login the camera as administrator, choose UPnP

Settings to enable UPNP and make sure the state is “UPnP success”.

2) Do port forwarding manually. (details: Figure 3.6/3.7)

If your router has Virtual server, it is used to do port mapping. Please add the

camera’s LAN IP and port which you set in basic network settings to the Virtual

map list.

Note: If you plug the camera in a router, the camera will have dynamic IP address,

you need set DDNS service settings to view it remotely.

5.2 How to set DDNS Service Settings (For dynamic IP user)

(1) Please first visit www.dyndns.com to get an account.

Choose Sign up FREE to get a free account.

Figure 2.4

Next, choose Sign Up under free.

- 9 -

http://www.chargerbuy.com

Andere Handbücher für FI8918W

Inhaltsverzeichnis

Andere Foscam IP-Kamera Handbücher

Foscam

Foscam FI9828P Bedienungsanleitung

Foscam

Foscam FI8909W Bedienungsanleitung

Foscam

Foscam FI9804W Bedienungsanleitung

Foscam

Foscam IP Camera Bedienungsanleitung

Foscam

Foscam FI9803EP Bedienungsanleitung

Foscam

Foscam FI8608W Bedienungsanleitung

Foscam

Foscam FI8910W Bedienungsanleitung

Foscam

Foscam FI9828P Bedienungsanleitung

Foscam

Foscam FI8909W Bedienungsanleitung

Foscam

Foscam CGI Bedienungsanleitung

Foscam

Foscam FI8918W Bedienungsanleitung

Foscam

Foscam FI8918W Bedienungsanleitung

Foscam

Foscam FI8905W Bedienungsanleitung

Foscam

Foscam FI8910W Bedienungsanleitung

Foscam

Foscam FI8908W Bedienungsanleitung

Foscam

Foscam FI8903W Bedienungsanleitung

Foscam

Foscam FI9821W Bedienungsanleitung

Foscam

Foscam FI8602 Bedienungsanleitung

Foscam

Foscam Huntvision Bedienungsanleitung

Foscam

Foscam FI9818W Bedienungsanleitung

Foscam

Foscam FI9802W Bedienungsanleitung

Foscam

Foscam FI9804W Bedienungsanleitung

Foscam

Foscam FI8904W Bedienungsanleitung

Foscam

Foscam C1 Lite Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung