Foscam FI8620 Bedienungsanleitung
V3.01
Model: FI8620
Quick Installation Guide
Outdoor Dome Water-proof Network Camera
ShenZhen Foscam Intelligent Technology Co., Ltd
FI8620 Quick Installation Guide
www.foscam.com - 1 -
Quick Installation Guide - For Windows OS
zIP Camera FI8620 x 1
zDC Power Adapter (12V-2.0A) x 1
zNetwork Cable x1
zMounting Bracket .x 1
zQuickInstallationGuide x1
zCD-ROM with Setup Software .x 1
zWarranty Card x 1
QuickInstallationGuideFlowChart
P.12
Quick Installation Dia
g
ram
Packa
g
e Contents
Login the Camera
Remote Access Setup
Software Installation
Other Settings
Hardware Installation
FI8620 Quick Installation Guide
www.foscam.com - 2 -
1) Open the package. Take out the camera out of the box carefully.
2) Get the camera connected to the router, and get it powered.
Use the network cable to connect the camera to the router or the switch in the LAN network at your
home or your office. Plug in the power. The small green light on RJ45 will turn on.
Figure 1.1 Plug the network cable
Insert the CD into the CD drive of your computer and find the folder “For Windows OS”. Select the IP
Camera Tool folder. Double click IPCamSetup.exe to install, it pops up a window as below (Fig.1.2).
Just click button “Next” to finish the installation.
Figure 1.2 Click Next, next to continue the installation
1. Hardware Installation
Start Installation
2. Software Installation
FI8620 Quick Installation Guide
www.foscam.com - 3 -
Figure 1.3 Click Close to finish installation, and get computer restarted
A shortcut icon will appear on your desktop after the IP Camera Tool software installation is
successfully completed.
Figure 1.4 Shortcut icon
Double click the IP Camera Tool icon and the following screen should appear.
Figure 1.5 IP Camera Tool Windows
The IP camera tool should find the camera’s IP automatically after you plug in the network cable. If
not, please make sure that DHCP is enabled on your router and that MAC address filtering, firewalls
and anti-virus are disabled temporarily until the camera is set up.
Double click the LAN IP address of the camera, it pops up a password dialog box.
3. Lo
g
in the Camera
FI8620 Quick Installation Guide
www.foscam.com - 4 -
Figure 1.6 Enter the username and password
Camera supports three-level users management: admin, user and guest.The default “admin” user
name and password are all “admin”, the default “user” user name and password are all “user”, and
the default “guest” user name and password are all “guest”. Different usernames have different
permissions. Admin user has the highest authority. He can do any settings. Guest has the lowest
authority.
Figure 1.7 The user interface
There are two login methods. One is Video View for PC user, the other is Mobile
View for Mobile user. Please choose Video View if you are using PC now.
Note
If you use PC, select this login mode
If you use Mobile, select this login mode
FI8620 Quick Installation Guide
www.foscam.com - 5 -
Figure 1.8 Surveillance Windows
Congratulations! You have succeeded in accessing in the camera by wired connection. Just leave
all the menus alone before you finish the quick installation.
The default administrator user name and password are all admin.
For the first time using you have to download the ActixeX and install it. For IE browser you can
download the ActiveX from the login UI, for Firefox,Google Chrome and Safari, you should download
QuickTime Player as the ActiveX from other website. (For more details: see user manual)
If you are still unable to see a live video, try shutting down any firewall or anti-virus software on your
computer.
We have been able to access the camera within the LAN network, but how to access the camera via
WAN or via internet? We have to do Remote Access Settings before we want to access the
camera outside the LAN network.
4.1 Static IP user
Static IP users do not need to set DDNS service settings for remote access. When you have finished
connecting the camera using LAN and port forwarding, you can access the camera directly from the
Internet by the WAN IP and port number.
Note
4. Remote Access Settin
g
s
FI8620 Quick Installation Guide
www.foscam.com - 6 -
zObtain the WAN IP from IPCAM
Please choose “For Administrator” and click “Remote Access”.
Figure 1.9 Obtain the WAN IP from IPCAM
Click show, you will see the WAN IP as below.
Figure 2.0 WAN IP
zHow to Obtain the WAN IP from a public website
To obtain your WAN IP address, enter the following URL in your browser:
http://www.whatismyip.com.The webpage at this address will show you the current WAN IP.
FI8620 Quick Installation Guide
www.foscam.com - 7 -
Figure 2.1 Get to know the WAN IP address of the router
Access the IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and
port number in IE browser or other browsers you use. For example, Http:// 218.17.160.187:85
Make sure port mapping (or also known as port forwarding) is successful. You can do port
mapping in two ways.
1) Enter the setting page of the router to enable UPNP function. Then login the camera as
administrator, choose UPnP Settings to enable UPNP and make sure the state is “UPnP success”.
2) Do port forwarding manually. (details: Fig.2.5)
If your router has a Virtual Server, it will do port mapping. Please add the camera’s LAN IP and port
which you set in basic network settings to the Virtual map list.
Note: If you plug the camera in a router, it will have dynamic IP address and you need to set DDNS
service settings to view it remotely.
4.2 How to configure Remote Access Settings (For dynamic IP user)
①Step 1 Go to the website www.no-ip.com to create a free hostname
Firstly: Login on www.no-ip.com and click No-IP Free to register.
Note
FI8620 Quick Installation Guide
www.foscam.com - 8 -
Figure 2.2 Register a user name on www.no-ip.com
Please register the account step by step according to instructions on www.no-ip.com
After registration, please login your email which used to register. You will receive an email from
website as below, please click the link to activate your ACCOUNT as indicated in email.
Secondly: Login the link with the registered username and password to create your domain
name.
Click here to register
FI8620 Quick Installation Guide
www.foscam.com - 9 -
Figure 2.3 Login the link to create a domain name
Figure 2.4 Create a domain name
Please create the domain name step by step according to instructions on www.no-ip.com
②Step 2, DO DDNS Service Settings within the Camera
Please set DDNS within the camera by hostname, a user name and password you’ve got from
www.no-ip.com
Take hostname ycxgwp.no-ip.info, user name foscam, password foscam2012 for example.
Firstly, goes to option of Remote Access on the administrator panel and enable DDNS.
Secondly, select No-ip.com as a server.
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill
ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect.
If failed, please double check if you have input the correct hostname, user name,
and password, and try to redo the settings.
③Step 3,Make Port Forwarding of the HTTP Port of the camera
What is port forwarding?
If you have no concept of Port Forwarding, please open the webpage
http://portforward.com/help/portforwarding.htm to learn some knowledge of Port Forwarding.
Note
Andere Handbücher für FI8620
3
Inhaltsverzeichnis
Andere Foscam Sicherheitskamera Handbücher
Foscam
Foscam G4EP-W Bedienungsanleitung
Foscam
Foscam V5EP Bedienungsanleitung
Foscam
Foscam FI9926P/Z2 Bedienungsanleitung
Foscam
Foscam HD Wireless IP Camera Bedienungsanleitung
Foscam
Foscam FI8916W Bedienungsanleitung
Foscam
Foscam T5EP Bedienungsanleitung
Foscam
Foscam FI9961EP Bedienungsanleitung
Foscam
Foscam FI9903P Bedienungsanleitung
Foscam
Foscam V4EC Bedienungsanleitung
Foscam
Foscam B4 Bedienungsanleitung
Foscam
Foscam FI9853EP Bedienungsanleitung
Foscam
Foscam C2M Bedienungsanleitung
Foscam
Foscam G4C Bedienungsanleitung
Foscam
Foscam SD2 Bedienungsanleitung
Foscam
Foscam SD4 Bedienungsanleitung
Foscam
Foscam FI9803P V2 Bedienungsanleitung
Foscam
Foscam T5EP Bedienungsanleitung
Foscam
Foscam HUNTVISION P2 Bedienungsanleitung
Foscam
Foscam R3 Bedienungsanleitung
Foscam
Foscam SABIP1100 Bedienungsanleitung
