Fostex 8335 Bedienungsanleitung

Model 8335

Owner's Manual

(Model D-15 exclusive TC/SYNC card)

Model 8335 (TC/SYNC card) Owner's Manual

Table of Contents

Introduction............................................................................................................................3

1. Contents of Package................................................................................................3

2. Installing the card in the D-15...............................................................................3

Major Functions..................................................................................................................4

Names and Functions.........................................................................................................6

Changing in D-15 functions and new SETUP menu items..............................................8

1. TC on tape will be shown in the FL display!.........................................................8

2. External time code (LTC) input will be displayed as the Reference!.................8

3. Input monitor of audio/time code is possible!....................................................9

Changes and the new effective SETUP menu................................................................10

1. Version display function [vErSion 001 -chk]....................................................10

2. Setup of the playback time code format [ReProtc 401 -***]............................11

3. Frame rate setup of playback time code [FrAME 402 -***]..............................11

4. Time code output ON/OFF setup at pause [PAUS tc 403 -***].........................12

5. Setup of time code output at fast winding [Wind tc 404 -***].........................12

6. Setup of the event start mode by REF TC [rEF PLY 405 -***]............................13

7. Setup of time code to be recorded [rEC Fr AM 411 -***]..................................13

8. Setup of the CHASE operation mode [CH SE M od 501 -***]............................14

9. Setup of the lock window [Lo ck Wind 502 -***]...............................................14

10. Setup of the external clock [Ex tC LK 503 -***]................................................15

Additional Functions........................................................................................................16

1. Recording the external time code (LTC)............................................................16

2. Conversion of A-TIME/IEC time code to LTC and output.................................18

3. Chase synchronizing by external TC (Playback only)......................................19

4. Phase modified operation by external sync signal...........................................21

5. Using the event start mode..................................................................................23

6. MEM NO locate/TIME locate by TC time............................................................25

7. Editing the OFFSET figure....................................................................................26

Major Specifications.........................................................................................................28

Model 8335 (TC/SYNC card) Owner's Manual

Introduction

We wish to thank you for purchasing the Fostex Model 8335.

The Model 8335 is an optional TC/SYNC card designed exclusively for the

Model D-15 Digital Master Recorder.

By installing this TC/SYNC card in the D-15, external time codes (LTC) can be

converted to the IEC time code (set of PRO R-TIME and PRO binary) and

recorded. Furthermore, A-TIME or IEC time codes recorded on the tape can

be converted to time codes (LTC) and played back.

Also, new functions such as the CHASE function (playback only) by external

time code, phase modifying operation using WORD, VIDEO, and AES/EBU

signals will be added to further complement the D-15 function.

In addition to functions added to the D-15 by installing the Model 8335,

functions before installation and partial changes after installation are also

explained in this manual.

Before operation, we suggest that you read the D-15 manual together with

this explanation.

1. Contents of Package

Accessory items packaged with the 8335 are as listed below.

Please check contents with this list for any missing items.

If anything is missing, please contact the Fostex Dealer or Distributor.

Accessory Amount

TC/SYNC card 1

Screws 7

Connecting cable (with 5 pin connector) 1

Connecting cable (without 30 pin connector) 1

Owner's Manual 1

2. Installing the card in the D-15

Normally, Fostex Dealer or Distributor will install this card in the D-15.

Therefore, please request the dealer or distributor of purchase to do the

installation.

Model 8335 (TC/SYNC card) Owner's Manual

Major Functions

Recording external time code (LTC)

External time code (LTC) applied to the TIME CODE connector can be

converted to the IEC time code (consisting of PRO R-TIME time code and PRO

binary), which is the standard format for professional DAT time code

recording, and then recorded.

In a D-15 installed with this card, 24 and 25 fps time codes can be

automatically discriminated and recorded but 29.97 and 30 fps cannot be

discriminated. Consequently, if recording 29.97 or 30 fps time codes are to

be recorded, the D-15 must be setup matched with the time code which is

recorded by the Model 8335 SETUP menu "411 -***."

Time code (LTC) can be recorded only during recording of audio signals

(or no sound recording) and time code cannot be recorded individually.

Also, if audio insert is carried out, time code of that section will be erased.

Refer to page [16] for time code recording and page [13] for SETUP menu "411 -***."

Conversion and output of A-TIME/IEC time code to LTC

When A-TIME or IEC time code is recorded on tape, it can be converted to

LTC and output from the TIME CODE OUT connector.

The frame rate and format of the time code (LTC) to be output can be

randomly set by the SETUP mode.

Refer to page [18] for time code playback and page [11] ~ [12] for the SETUP mode.

Chase by external time code (LTC) is possible (At PLAYBACK only)

Time code chase against externally input time code is possible.

In this case, the chase mode selecting and external sync signal selecting is set

by the SETUP mode.

Refer to page [19] for chase synchronizing and page [15] for the SETUP mode.

Phase modifying operation by WORD IN, VIDEO IN, AES/EBU IN is also possible

Phase modifying operation by the external sync signal (WORD, VIDEO, AES/

EBU) is possible with the 8335 installed.

External sync signal selecting can be set by the SETUP mode.

Refer to page [21] for details on phase modifying operation by an external sync signal

and page [15] for the SETUP mode.

Time locate/memory edit by TC is possible

In addition to time locate/memory edit by A-TIME, time locate/memory edit

by TC time will be possible.

Model 8335 (TC/SYNC card) Owner's Manual

Event start by REF TC is possible

Simultaneous with the external time code (REFERENCE TC) time coinciding

with the memory [00] time, the D-15 will execute event start (playback mode).

If the D-15 GPI switch is ON during this operation, then EVENT 0 will be

output from GPI OUT.

Model 8335 (TC/SYNC card) Owner's Manual

Names and Functions

1.TIME CODE OUT connector (Connector: RCA pin jack - unbalanced)

Time code (LTC) converted from A-TIME on the tape or IEC time code is

output here.

2.TIME CODE IN connector (Connector: RCA pin jack - unbalanced)

External time code (LTC) is input here.

Because this connector is the switching type, if it is used in parallel with

the balanced connector (XLR), priority is given to the unbalanced (RCA)

connector.

3.TIME CODE OUT connector (Connector: XLR-3-32 type - balanced)

Time code (LTC) converted from A-TIME on the tape or IEC time code is

output here.

4.TIME CODE IN connector (Connector: XLR-3-31 type - balanced)

External time code (LTC) is input here.

If this is used in parallel with the unbalanced (RCA) connector, the RCA

type will be given priority and thus this connector will not function.

5.VIDEO THRU connector (Connector: BNC type)

The external video sync signal is input here when synchronizing with the

video sync signal.

6.VIDEO IN connector (Connector: BNC type)

The external video sync signal is input here when synchronizing with the

video sync signal.

7.VIDEO IN terminating switch (75 ΩON/OFF)

Termination of the VIDEO IN signal is switched ON or OFF but is normally

switched ON.

If a multiple connection is made via VIDEO THRU, then the last equipment

only is switched ON and others switched OFF.

OUTIN THRUIN TIME CODE

OUTIN

VIDEO

WORD

75 75

OFFON

ΩΩ

910 8 7 6 5 4 3 2 1

Model 8335 (TC/SYNC card) Owner's Manual

8. WORD OUT connector (Connector: BNC type)

Word sync signals are output here.

When synchronizing with an external signal, word sync signals in sync

with the external sync signal is output here.

9. WORD IN connector (Connector: BNC type)

The external word sync signal is input here when synchronizing with the

word sync signal.

10. WORD IN terminating switch (75 ΩON/OFF)

Termination of the WORD IN signal is switched ON or OFF but is normally

switched ON.

Model 8335 (TC/SYNC card) Owner's Manual

Changes in D-15 functions and new SETUP menu items

There will be some changes in the displays and key functions by installing

the 8335 in the D-15 Furthermore, SETUP mode menu items heretofore not

effective will now be effective.

The content of these changes and now effective functions only will be

explained here. Therefore, in regards to other functions, please refer to the

D-15 Owners Manual.

Content of changes

1. TC on tape will be shown in the FL display!

2. External time code (LTC) input will be displayed as the Reference (REF

TC)!

Due to these changes in above 1. and 2., the display content will be different

as a result of the D-15 DISP TIME key operation.

[Display switching by the DISP TIME key without 8335]

[Display switching by the DISP TIME key with 8335]

(*1) TC Displays IEC time code figures recorded on tape.

(*2) A-time TC Displays the resulting time code figures when A-time recorded on the

tape is converted to time codes.

(*3) REF TC Taking the externally input time code as a Reference, it is displayed as

follows:

<Example>: When indicating 1h:34m:28s:15f, frame rate = 24

Other frame rate figures will be displayed as shown below:

Type of TC Display

24 (FILM) 24

25 (EBU) 25

30 or 29.97 drop frame (SMPTE) 30D or 29D

30 or 29.97 nondrop frame (SMPTE) 30N or 29N

HMSF

A-time DATE

A-time DATE REF TC (*3)

TC (*1) or A-Time TC (*2)

Model 8335 (TC/SYNC card) Owner's Manual

3. Input monitor of audio/time code is possible!

Input monitoring of audio and time code is possible by pressing the D-15

[INPUT MONITOR] key.

However, if audio data is being read into the RAM under the INSTANT

START mode, input monitoring will be switched OFF automatically.

Refer to page [14] of the D-15 Owner's Manual on judging input monitor

conditions by the INPUT MONITOR LED.

<NOTE>

If it is desired to confirm the time code time which is being input,

change to the "REF TC" display by pressing the [DISP TIME] key so that

the time code figure being input can be confirmed.

Model 8335 (TC/SYNC card) Owner's Manual

Changes and the new effective SETUP menu

Together with changes in the SETUP menu "Version display function" by

installation of 8335, the following 9 item menu can be setup.

[Menu changed of display function]

* Version display function (vErSion 001-chk)

[New menu possible of setup]

* Setup of the playback time code format (rEProtc 401 -***)

* Frame rate setup of playback time code (FrAME 402 -***)

* Time code output ON/OFF setup at pause (PAUStc 403 -***)

* Setup of time code output at fast winding (Windtc 404 -***)

* Setup of the event start mode by REF TC (rEFPLY 405 -***)

* Setup of the time code to be recorded (rECFrAM 411 -***)

* Setup of the CHASE operation mode (CASEMod 501 -***)

* Setup of the lock window (LockWind 502 -***)

* Setup of the external clock (ExtCLK 503 -***)

1. Version display function [vE r Si on 001 -chk]

In addition to the D-15 version/date, the version/date of 8335 that is installed

can be confirmed.

After simultaneously pressing [0] and [1] of the [numerical keypad] to enter

the SETUP mode, select the [vErSion 001 -chk] menu by rotating the [JOG] dial

and press the [EXECUTE/YES] key (It will change to the [D-15 version] display).

Successively, if the [JOG] dial is rotated clockwise, it will alternately be

displayed as follows in this order, and the order will be reversed when rotated

counter clockwise.

D-15 version

8335 version

D-15 date

8335 date

Inhaltsverzeichnis

Andere Fostex Aufnahmegeräte Handbücher

Fostex

Fostex M20 Bedienungsanleitung

Fostex

Fostex X-30 Bedienungsanleitung

Fostex

Fostex 8333 Bedienungsanleitung

Fostex

Fostex APPENDIX Bedienungsanleitung

Fostex

Fostex X-15 Multitracker Bedienungsanleitung

Fostex

Fostex X-24 Bedienungsanleitung

Fostex

Fostex D-80 Bedienungsanleitung

Fostex

Fostex CR500 Bedienungsanleitung

Fostex

Fostex G24S Bedienungsanleitung

Fostex

Fostex D-90 Bedienungsanleitung

Fostex

Fostex VF80EX Bedienungsanleitung

Fostex

Fostex FR-2 Technisches Handbuch

Fostex

Fostex 8346 Bedienungsanleitung

Fostex

Fostex D-10 Bedienungsanleitung

Fostex

Fostex VF160EX Bedienungsanleitung

Fostex

Fostex D-30 Bedienungsanleitung

Fostex

Fostex DC-R302 Bedienungs- und Wartungshandbuch

Fostex

Fostex MR-8CD Bedienungsanleitung

Fostex

Fostex VF-16 Bedienungsanleitung

Fostex

Fostex VF-16 Bedienungsanleitung

Fostex

Fostex UR-2 Bedienungsanleitung

Fostex

Fostex X-24 Bedienungsanleitung

Fostex

Fostex RD-8 Bedienungsanleitung

Fostex

Fostex DE-10 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch