GENERAL SAFETY RULES
1. Keep the work area clean. Work areas and cluttered benches invite injuries.
2. Avoid a dangerous environment. Do not expose power tools to rain and do not use in damp or wet locations.
Keep the work area well lit. Do not use the tool in presence of flammable gases or liquids.
3. Connect dust extraction equipment. If means are provided for the collection of dust, ensure that these devices are
connected and properly used.
4. Keep visitors and children away. All children and visitors should be kept a safe distance from the work area.
5. Protect yourself from electric shocks. Avoid contact with earthed surfaces.
6. Do not mistreat the power cord. Never pull the power cord to disconnect the plug. Keep the power cord away from
heat, oil and sharp edges.
7. Use extension cords intended for outdoor use. When the tool is used outdoors, use only extension cords intended
for outdoor and bearing indications to this effect.
8. Be aware. Observe what you do, use common sense. Do not use the tool when you are tired.
9. Do not use the machine if you are under the influence of medication, alcohol or drugs.
10. Avoid accidental starting. Make sure the switch is in the “Off” position before plugging in.
11. Dress properly. No loose clothing or jewellery that can be caught in moving parts. Non-slip footwear is
recommended for outdoor work. Keep long hair covered or tied up.
12. Always use personal protection devices: wear safety glasses. Wear a mask if operation is dusty. Wear
hearing protection or earplugs in noisy areas. Wear protective gloves when handling parts with sharp edges.
13. Do not lean over the tool. Keep your balance at all times.
14. Seek the advice of an expert if you are not familiar with the use of this machine.
15. Store tools when not in use. They should be stored in dry, locked storage out of reach of children.
16. Do not force the machine. It will work better and safer when used in the way it was designed.
17. Use the right tool. Do not force a small tool to do the job of a heavy duty tool. For example, do not use a circular
saw to cut branches or logs.
18. Secure what you are working on. Where possible, use clamps or a vice. It's safer than using your hands.
19. Keep tools in good condition. Keep tools sharp and clean in order to get the best and safest performance. Follow
instructions for lubricating and changing accessories. Regularly check the cable and replace if damaged. Keep
handles dry, clean and free of oil and grease.
