Foxtech FH310W Bedienungsanleitung
FOXTECHPFV.COM
1/ 5
FOXTECH FH310W
1080P 10X OPTICAL ZOOM CAMERA WITH 3 AXISES
User Manual
1080P 10X OPTICAL ZOOM CAMERA
Speficications & Features:
-Working voltage:12V
-High image quality: 1/4" 500 megapixel CMOS sensor
-Output resolution: 1280*720@60fps
-Optical zoom: 10x zoom focus length:f ＝4.9~49mm,diaphragm diameter φ12.0
-Support wide dynamic,dynamic range up to 105dB,good capture in both strong and low light
condition
-Interface: HDMI and AV output,up to 32GB SD card storage at 1080P
-Real-time quick focus function, focus time<1S
-Manual focus available when auto focus can’t deal with the complex background
-Support flip vertical/flip horizontal/still image,AWB,auto gain control, auto color correction
-Working temperature range: -10℃- 55 ℃
-Super Lolu: coloful 0.05 lux @ F1.6, ensures clear details display shooting in low light
-PWM zoom control
-Multipal working modes: Photo shot,video recording start&stop,playback
-Small size:63mm×47mm×40mm
-Light weiht:100g
FOXTECHPFV.COM
2/ 5
FOXTECHPFV.COM
3/ 5
Foxtech FH310W with 3 Axises Gimbal
Speficications & Features:
-Working voltage: 3S(11.1V)
-Working current: Static,180mA@12V; Dynamic, 240mA@12V
-Fully assembled, Plug and Fly
-PID pre-calibrated
-3 zoom speed options: low,middle,high.
-Control range: -90°to +90°(Tilt)
-150°to +150°(Pan)
-45°to +45°(Roll)
- Working temperature: -10℃~50℃
- Weight: 260g
- Size: L105mm x W91mm x H98mm
FOXTECHPFV.COM
4/ 5
1 step: Wire Connections
Instruction of Wire of Gimbal Controlling:
Connecters Radio Controller
CMD------------------------------Connect Three Options Switch
Y (YAW) -------------------------Connect Port of Stick
P (PITCH) -----------------------Connect Port of Stick
5V -------------------------------Power for Receiver
GND------------------------------Connect GND of Receiver
Instruction of Wire of Camera Controlling:
GND -----------------------------GNG of Analog Video Output, Connect GND of Analog Transmitter Video
Focus----------------------------Focus Manually, Connect Port of Stick
Zoom----------------------------Zoom Chnaging, Connect Port of Three Options Switch / Stick
Video----------------------------Analog Video Output,ConnectAnalog Transmiter Video Input
PIC ----------------------------Photography/Recoding, Connect Port of Three Options Switch / Knob
REC ----------------------------Recstart/stop, Connect Port of Three Options Switch / Knob
Step 2: Gimbal self-test
Keep the lens in level and in the same direction with camera before power on. After power on, 5
beeps and beautiful melody, and then pass self-test and can be working well.
FOXTECHPFV.COM
5/ 5
Step 3:
There are three working modes designed for different vibration of drone. When the vibration is
strong, please switch in high power mode, with a short vibration and re-read power parameter.
Mode I: low power, gimble works in lock-head mode
Mode II: mid-power, gimble works in following mode
Mode III: high power, gimble works in following mode
Inhaltsverzeichnis
Andere Foxtech Sicherheitskamera Handbücher
