FRANCO G Series Gebrauchsanweisung

INSTRUCTION MANUAL FOR

USE AND MAINTENANCE

Manual version: 2019-A

HOT AIR

GENERATORS

TRANSLATED VERSION FROM ITALIAN TO

E N G L I S H

Before installing or running the unit,

it is obligatory to carefully read and consult this manual.

Franco srl –Via Nazionale, 80 12010 Cervasca (CN), Italy

FRANCO srl Manual of use and maintenance G series

INDEX

INDEX ......................................................................................................................................3

1 - INTRODUCTION.................................................................................................................4

1.1 General warnings............................................................................................................4

1.2 Instructions for proper disposal of the product................................................................4

1.3 Covenants used throughout this manual ........................................................................5

1.4 Conservation of the instruction manual...........................................................................5

1.5 Recipients.......................................................................................................................6

1.6 Glossary and pictographs...............................................................................................6

1.7 Applications .................................................................................................................. 10

1.8 Versions........................................................................................................................10

1.9 Identification and data label of the unit .........................................................................10

1.10 Parts description.........................................................................................................11

1.11 Transport and handling...............................................................................................11

1.12 Warranty..................................................................................................................... 12

1.13 Manufacturer’s identification data ...............................................................................12

1.14 Statements..................................................................................................................12

1.15 Declaration of conformity............................................................................................ 13

2 - INSTALLATION................................................................................................................ 14

2.1 Before installing............................................................................................................ 14

2.2 Positioning....................................................................................................................14

2.3 Electrical connection.....................................................................................................15

2.4 Gas supply connection..................................................................................................15

3 - OPERATION..................................................................................................................... 15

3.1 Getting started..............................................................................................................15

3.2 First start.......................................................................................................................15

3.3 Start and stop ...............................................................................................................16

4 - MAINTENANCE................................................................................................................ 16

4.1 Cleaning........................................................................................................................16

4.2 Replacement or cleaning of the nozzle.........................................................................17

5 –TECHNICAL SPECIFICATIONS...................................................................................... 17

5.1 Technical data ..............................................................................................................17

5.2 Wiring............................................................................................................................18

5.3 WIRING DIAGRAM G36-25 –G45-40..........................................................................18

5.4 WIRING DIAGRAM G56-65 –G56-90..........................................................................19

5.5 THERMOSTATIC SOCKET USAGE ............................................................................19

5.6 Spare parts...................................................................................................................20

6 –PROBLEMS AND SOLUTIONS ...................................................................................... 23

FRANCO srl Manual of use and maintenance G series

1 - INTRODUCTION

1.1 General warnings

This device must be used only for the functions for which it was intended "Hot air generator”. Any other use is to

be considered improper and dangerous. Franco srl cannot be held liable for any damages caused by improper,

incorrect or unreasonable use, or if the device is used in systems that do not comply with safety regulations.

- Check the integrity of the device at the opening of the package, paying particular attention to the presence of

damages or deformations that can lead to breakage and / or malfunction during use. In such cases do not

connect the machine to the mains. Carry out these checks before each use.

- Before connecting the unit, make sure that the data shown on the device’s plate matches that of your electricity

distribution network. The data label is located on the side of the device (par.1.9).

- Respect the safety standards set for the electrical equipment and in particular:

oFollow the installation and operation instructions concerning the use of the equipment.

oDo not place objects on the generator.

oAvoid children from using the device, and / or unable subjects without proper supervision.

oDo not touch the generator during operation or until it is completely cooled down.

oNever place water or any other liquids into the device. In the scenario of the device becoming wet,

immediately turn off the electricity by lowering the switch on the electrical panel of your system and

disconnect the power before touching the device.

oDo not insert objects inside the tank as the device may be damaged irreparably.

oDo not use accessories, spare parts and / or components that are not provided or supplied by the

manufacturer.

oAvoid touching the appliance with wet and / or humid hands.

oDo not pull the power cord nor expose it to risk of severing.

oDo not expose the unit to weather (rain, sun, etc...).

oIn case of failure or malfunction, switch off immediately and disconnect the power.

oDo not try to open or tamper the device: contact the technical service offered by

Franco srl.

1.2 Instructions for proper disposal of the product

Under the European Directive 2002/96/EC.

At the end of its useful life the product must not be disposed of as waste.

The device can be taken to special recycling centers provided by local authorities, or at retailers that provide this

service. Disposing the product in separate parts avoids possible negative consequence to the environment and

to human health, which would both be the result of an inappropriate disposal, and allows the retrieval of

materials so that significant savings in energy and resources would be reached. As a reminder of the obligation

to dispose electrical equipment separately, the product is marked with the crossed mobile waste container.

Fig. 1.1

FRANCO srl Manual of use and maintenance G series

1.3 Covenants used throughout this manual

The Manual is divided into autonomous chapters, each of which is addressed to a specific operator’s figure

(installer, operator and maintainer), for which the skills needed to operate the machine safely have been defined.

The sequence of chapters follows the temporal logic life of the machine.

To facilitate the immediate comprehension of the text, throughout the manual are used terms, abbreviations and

pictograms, whose meaning is shown below.

The Instruction Manual consists of a cover, an index and a series of chapters (sections).

The home page lists the identification data of the machine and model, the revision of the manual instructions,

and finally, a picture of the machine described, drawn in order to facilitate the reader in identifying the machine

and its use.

ABBREVIATIONS

Ch. = Chapter

Par. = Paragraph

P. = Page

Fig. = Figure

Tab. = Table

UNITS OF MEASURE

The units of measure used in this manual are those provided by the International System (SI).

1.4 Conservation of the instruction manual

The instruction manual must be carefully stored and must follow and match the device in all the cases of change

of ownership incurred during the life span of the machine itself.

The conservation must be done by handling the manual with care, with clean hands and on clean surfaces. Parts

must not be removed, torn or arbitrarily modified.

The manual must be stored in a secure environment, protected from moisture and heat, and near the referring

device. The manufacturer, if requested by the User, may provide additional copies of the instruction manual of

the machine.

The User can request additional copies of the manual by writing to customer@francosrl.com.

METHODOLOGY FOR UPDATING THE MANUAL

The Manufacturer reserves the right to modify the design or specifications of the machine as part of its policy of

improving and enabling them to comply with the statutory or other requirements or standards applicable in any

territory in which goods are sold, without notifying the Customer and without updating the manuals given to the

user. Moreover, in case of changes (previously agreed between the Customer and the manufacturer) to the

machine installed, which signifies the modification of one or more chapters of the Handbook of Instructions, the

manufacturer will be responsible for sending the modified chapters affected by the structural change (including

the new model of revision) to the User.

The User is responsible, following the directions accompanying the updated documentation, for replacing all the

copies owned, the old chapters with the new chapters, the home page, and the index with the copy updated to

the new revision level.

The manufacturer shall be responsible for the descriptions included in this manual; in case of an inconsistency

being detected in a translated version of the manual (English version), the reader must refer back to the original

Italian version of the handbook and, eventually, contact the sales department, who will make necessary

changes.

FRANCO srl Manual of use and maintenance G series

1.5 Recipients

The manual is addressed to: the installer, the operator, and the qualified personnel entitled to the maintenance

of the device.

EXPOSED PERSON:

refers to any person exposed, wholly or partially, to a danger zone;

OPERATOR:

refers to those persons responsible for installing, operating, regulating,

clearing, repairing and moving the machine, and also performing the

maintenance of the device;

QUALIFIED PERSONNEL

QUALIFIED OPERATOR:

refers to the persons who have completed courses of specialization and

training, and that have acquired experience in: installing, starting,

operating, maintaining, repairing and transporting the device, or similar

ones.

The machine is intended for industrial use (professional and not widespread) for which qualified operators are

needed, in particular, workers that:

Have reached the age of majority;

Are physically and mentally appropriate to perform works that include technical difficulties;

Have been properly educated on the use and maintenance of the machinery;

Have been considered suitable to undertake the assigned job by their employer;

Can understand and interpret the operator’s manual and the safety requirements;

Know the emergency procedures and their implementation;

Posses the ability to operate the specific type of equipment;

Are familiar with the specific applicable rules;

Have understood the operating procedures defined by the manufacturer of the machine.

1.6 Glossary and pictographs

In this section we list the non common terms included in the manual. The following also explains the

abbreviations used and the meaning of the pictograms in relation to the qualification of the operator and the state

of the machine; their use can provide quick and unique information, necessary for the proper use of the machine

under safety conditions.

GLOSSARY (Att. I p. 1.1.1 Dir. 2006/42/CE)

HAZARD

A potential source of injury or damage to personal health;

DANGER ZONE

All areas within and/or around the machinery in which the

presence of a person constitutes a risk to the health and safety of

himself/herself;

EXPOSED PERSON

Any person that finds himself/herself entirely or partially in a

hazardous area;

OPERATOR

The person responsible for installing, operating, regulating,

clearing, repairing and moving the machine, and also performing

the maintenance of the machinery;

RISK

The combination of probability and severity of an injury or harm to

health that can arise in a hazardous situation;

GUARD

The part of the machinery used specifically to provide protection by

means of a physical barrier;

PROTECTION DEVICE

The device (other than a shelter) that reduces (alone or in

conjunction with a shelter) the risk of an operation;

INTENDED USE

Use of the machinery according to the information provided in the

instruction manual;

REASONABLY FORESEEABLE

MISURE

Use of the machinery in an indifferent manner from that stated in

the instruction manual, which may result from a foreseeable

human behavior.

FRANCO srl Manual of use and maintenance G series

OTHER DEFINITIONS:

HUMAN-MACHINE INTERACTION: Any situation in which an operator interacts with the machine in any of

the operational phases at any time of the life of the machine itself;

OPERATOR’S QUALIFICATION: Minimum level of competence that an operator must have in order to

perform the described operation;

NUMBER OF OPERATORS: The appropriate number of operators needed to optimally perform the

described operation, it is derived from an accurate analysis made by the

manufacture, and for which the use of a different number of operators

may prevent the occurrence of the expected result or endanger the

safety of the personnel involved;

STATE OF THE MACHINE: The state of the machine includes the operating mode, for example:

running in automatic mode, maintained action control (jog), shutdown,

etc… the safety conditions on the machine such as included protectors,

excluded protectors, emergency shutdown, isolation from energy

sources, etc…

RESIDUAL RISK: Risks that remain, despite of the protective measures incorporated in the

design of the machine, the complementary protections, and the

additional protective measures.

SAFETY COMPONENT: Component:

- designed to fulfill a safety function;

- the failure and/or malfunctioning of which endangers the safety of

persons (such as a lifter; a fixed, moving or adjustable protector; an

electrical, electronic, optical, pneumatic or hydraulic device that interlock

a protector; etc…).

FRANCO srl Manual of use and maintenance G series

PICTOGRAPHS CONCERNING THE OPERATOR’S QUALIFICATION

Symbol

Description

Generic laborer: operator lacking of specific competences, capable of performing only simple tasks

under the control of qualified technicians.

Lifting and handling vehicles driver: operator qualified for the use of vehicles used in lifting and

handling materials and machines (carefully following the manufacturer’s instructions), in accordance

with the user’s country’s laws.

Mechanic maintainer: qualified technician, able to operate the machine under normal conditions, to

run it with the maintained action control (JOG) with disabled protections, and to intervene on the

mechanical parts in order to make the necessary adjustments, maintenances and repairs. Typically

this operator is not qualified to work on electrical systems while the device is connected to the

mains.

Electrical maintainer: qualified technician, able to operate the machine under normal conditions, to

run it with the maintained action control (JOG) with disabled protections, and enabled to any kind of

operation of electrical adjustment, maintenance and repair. This operator is qualified to work on

electrical systems while the device is connected to the mains.

Manufacturer’s technician: qualified technician offered by the manufacturer to carry out complex or

particular operations or, in any other case agreed with the user. The skills are, as contingently

appropriated, mechanical and/or electrical and/or electronic and/or concerning software.

PICTOGRAPHS CONCERNING THE STATE OF THE DEVICE

The pictographs contained in a square/rectangle provide information.

Symbol

State of the device

Device OFF: with electric and pneumatic power disconnected.

Machine in motion: with automatic function, movable protections closed and relative interlocking

devices activated, and fixed protections closed.

Device ON: in standby and ready to start by functional consent activation (eg. switchboard

consent), movable protections closed with relative safety device included, and fixed protections

closed.

FRANCO srl Manual of use and maintenance G series

PICTOGRAPHS CONCERNING SAFETY

The pictograms contained in a triangle indicate DANGER.

The pictograms contained in a circle impose PROHIBITION / OBLIGATION.

Pictograph

Denomination

Hazardous voltage.

Entanglement.

Dragging.

General danger.

Do not remove safety devices.

Prohibition of cleaning, oiling, greasing, repairing or adjusting by hand when the device is in motion.

Duty to remove power before starting works or repairs.

Protective gloves required.

Safety footwear required.

Safety helmet required.

FRANCO srl Manual of use and maintenance G series

1.7 Applications

The G series series hot air generators run on LPG (Liquid petroleum gas) and methane as the combustion fuel.

The G series generators are of direct combustion type. The air is heated by means of the thermal energy

generated during combustion and is transferred to the environment to be heated with the combustion products,

thereby rendering the thermal energy produced 100% available. The environment must be suitably ventilated in

order to ensure sufficient air exchange.

Do not use the generator in basements or below ground level or in premises destined for domestic use.

There are a series of safety devices which come into effect in the event of faulty function. The electronic control

device intervenes in the event of irregular flame or flame which tends to go out, stopping the burner and igniting

the burner block button indicator.

G56-70 and G56-100 stop if there is a fault in ventilation.

The materials used in building the machine ensure reliability and durability in time.

This device must be used only for the functions for which it was intended

- Hot air generator.

Any other use is to be considered improper and dangerous.

1.8 Versions

Hot air generators G series are available in the following versions:

1458200 Generatore G36-25 25kW 3.000m³/h 230V 50Hz 1~+N

1458300 Generatore G45-40 40kW 4.000m³/h 230V 50Hz 1~+N

1458400 Generatore G56-65 65kW 7.000m³/h 230V 50Hz 1~+N

1458500 Generatore G56-90 90kW 8.000m³/h 230V 50Hz 1~+N

1.9 Identification and data label of the unit

Each machine is identified by the CE plate on which, indelibly set, is reference data of the device itself.

In any communication, either with the manufacturer or with the customer service, always cite these references.

Fig.1.2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere FRANCO Tragbarer Generator Handbücher

FRANCO

FRANCO KS Series Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung