Franke FKU908TCWXS Bedienungsanleitung

HANDBOOK HOOD FKU908TCWXS 9925031-110.0019.380

UPDATED JANUARY 2010

MOTOR NR 01 POWER IMPUT : 340 W

SPEED : 8+INTENSIVE

LIGHTING : 16 W 1 NEON

TOTAL POWER : 356 W

FLOW RATE (FREE DELIVERY) : 810 M3/H

FLOW RATE (IEC 61591) 760/670 M3/H

SOUND POWER (IEC 60704-2-13) 69

IMPUT VOLTAGE : 230V 50 HZ

EXIT DIAMETER 150 MM

PRESSURE MAX 500 PA

CONTROLS : ELECTRONIC – LOW TENSION PUSH BUTTON KEY TOUCH

CONTROL

CONTENTS:

TECHNICAL

DRAWING

ELECTRICAL CONNECTION

CLEANING THE COMFORT PANELS

CONTROLS HOW IT WORKS

METAL GREASE FILTERS

CHARCOAL FILTER

SUBSTITUTION OF THE CHARCOAL FILTER

CHANGING LAMP 16 W NEON LAMP

LIST SPARE PARTS

EXPLODED VIEW

WIRING DIAGRAM

TECHNICAL DATA

ELECTRICAL CONNECTION •

Connect the hood to the mains through a two-pole switch having a contact gap of at least 3

mm.

• Remove the grease filters (see paragraph Maintenance) being sure that the connector of the

feeding cable is correctly inserted in the socket placed on the side

of the fan.

CLEANING THE COMFORT PANELS

• Pull the Comfort Panel to open it.

• Disconnect the panel from the hood canopy by sliding the fixing pin

lever.

• The comfort panel must never be washed in a dishwasher.

• Clean the outside using a damp cloth and neutral liquid detergent.

• Clean the inside as well using a damp cloth and neutral detergent;do

not use wet cloths or sponges, or jets of water; do not use abrasive

substances.

• When the above operation has been completed, hook the panel back

to the hood canopy and close it by turning the knob in the opposite

direction.

KEY- FUNCTION DISPLAY

A Switches the extractor motor on and off at

the latest selected speed

Indicates the selected speed.

B Decreases the suction speed.

The number of lit LEDS decreases.

C Increases the suction speed. The number of lit LEDS increases.

D By pressing this key it is possible to start

the intensive

speed from any previously selected speed

except the Delay-function and 24H-function.

This speed has been timed at 10 minutes.

After that time the system activates

automatically the latest selected speed. This

function is suitable for cooking conditions

when vapours and smells are at the utmost

emission.

I flashes and the LEDS are all lit.

By pressing the key the function is

stopped.

E By pressing this key it is possible to set up

the motor to a suction speed at 100 m3/h .

24 appears and the LEDS extinguish one

by one. By pressing the key the function is

stopped

F By pressing this key it is possible to set the

delayed shutdown of the motor and the

lighting to 30 minutes.

This function is suitable for a complete

elimination of residual cooking odours.

Functioning only when the motor is on(not

during the 24H-function or intensive function).

By pressing the key the function is stopped

A flashing clock-symbol appears.

By pressing the key the function is

stopped

G By pressing this key for about 2 seconds it

is possible to reset the filter saturation alarm

After 100 working hours a drop-symbol

appears. Metal grease filters have to be

washed.

H By pressing this key the intensity of the

lighting system can be decreased.

Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass.The motor and lights are switched

Off.By pressing the F-key (Delay) for about 5 seconds the keyboard block can be activated or deactivated.

This function is confirmed by a Beep and by moving motor LEDS on display.

Metal grease filters

Metal filters can be washed also in a dish machine. They need to be washed every

time a drop-symbol appears in the display or at least every two months. In case of

very frequent use these have to be washed even more often. Alarm reset • Press

the G-key for at least 2 seconds.

Cleaning

• Open the comfort panel.

• Remove the filters one by one by pushing them backwards and pulling them

down contemporaneously.

• Wash the filters. Pay attention not to bend them. Make sure that filters are

completely dry before putting them into their seat. (a possible modification of the

filter surface doesn’t influence its efficiency).

• Place the filters again into their seats and make sure that the handle of the filter

remains outside.

• Close the comfort panel.

Charcoal filter (recycling version)

This filter cannot be washed or regenerated. It must be replaced when the C

appears on the display or at least once every 4 months.

The filter saturation alarm has to be activated already before. Activation of the

alarm signal • In the recycling version hoods the filter saturation alarm must be

activated during the installation or later.

• Switch off the hood and the lights.

• Press the E-key for about 5 seconds until the last two segments of the motor

LEDS are lit on the display.

• By releasing the E-key the clock icon starts to flash.

• Within 3 seconds press the D-key to activate/deactivate charcoal filter

saturation alarm.

• C-symbol lit - charcoal filter saturation alarm ACTIVATED. • C-symbol unlit -

charcoal filter saturation alarm DEACTIVATED.

SUBSTITUTION OF THE CHARCOAL FILTER

Alarm reset

• Switch off the motor and the lighting system.

• Press the G-key for at least 2 seconds. Substitution of the filter

• Open the confort panel.

• Remove the metal grease filters.

• Remove the charcoal filter as indicated in the picture.

• Place the filter again into its seat.

• Place again the metal grease filters into their place.

CHANGING LAMP 16 W Neon Lamp

• Open the comfort panel.

• Remove the neon lamp guard by unfastening the screws and sliding it out of its

housing.

• Change the Neon lamp or the Starter, taking care to ensure that the new

components have the same characteristics as the old ones.

• Replace the neon lamp guard.

• Close the comfort panel.

Position Spare part code franke fun number description quantity PRODUCT

1 1961081 133.0036.292 CASING+BRACKET 1 9925031

2 1961446 133.0061.944 KIT BOARD TERMIN. BLOCK+COVER 1 9925031

4 1961084 133.0036.931 POWER PACK 230V 50 HZ 1 9925031

5 9925204 112.0016.756 CHARCOAL FILTER/ PANEL 1 9925031

8 1960309 133.0036.314 CLIP 2 9925031

9 1961085 133.0058.404 SELF-SUPPORTING FILTER 3 9925031

10 1961385 133.0017.004 PIVOT STOPPER NR 02 PIECES 1 9925031

11 1961086 133.0036.539 SUPPORT SPOT-LIGHT 1 9925031

12 1961447 133.0059.032 STARTER FS 11 220240V 1 9925031

13 1961088 133.0018.578 LAMP HOLDER 1 9925031

14 1961089 133.0036.550 LAMP 16W/25 L 720 MM 1 9925031

15 1961090 133.0036.551 LAMP HOLDER 1 9925031

17 1961092 133.0032.532 PANNEL 1 9925031

18 1961392 133.0057.285 SUPPORT HINGE FOR LIGHTSPOT 1 9925031

102 1961272 133.0056.065 CONTROLS ASSEMBLY 1 9925031

104 1960684 133.0059.766 10 WAY FLAT CABLE 150 1 9925031

302 1961418 133.0059.007 FAN MOTOR 1 9925031

305 1961319 133.0051.604 KIT MOTOR SHOCK ABSORBER 4 9925031

312 1960631 133.0016.892 CAPACITOR 1 9925031

330 1961274 133.0051.414 SET CONNECTION FOR MOTOR 1 9925031

399 1961416 133.0059.008 KIT MOTOR ASSEMBLY 1000MC 220-50/60 1 9925031

501 1961275 133.0046.952 SET 2 FIXING BRACKETS 1 9925031

506 1961276 133.0046.956 SET FLANGE- CONNECTION 1 9925031

508 1960200 133.0016.959 SPIGOT 120-150 1 9925031

509 1961093 133.0036.636 LOWER DUCT MM 545 1 9925031

511 1961094 133.0036.639 UPPER DUCT 470 MM 1 9925031

606 1961277 133.0052.537 SET FIXING BRACKETS 1 9925031

610 1961278 133.0051.413 SET CONNECTION FIXING 1 9925031

product co

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Franke Dunstabzugshaube Handbücher

Franke

Franke FNO 605 BK Bedienungsanleitung

Franke

Franke FFU 605 BK XS LED Bedienungsanleitung

Franke

Franke FSMS WALL F42 Bedienungsanleitung

Franke

Franke FTC622XSAU Bedienungsanleitung

Franke

Franke FSW908TC WH Bedienungsanleitung

Franke

Franke FDF 9156 I XS Bedienungsanleitung

Franke

Franke FDW 908 RB XS Bedienungsanleitung

Franke

Franke FBI 705 XS HCS Bedienungsanleitung

Franke

Franke FDL 307 W Bedienungsanleitung

Franke

Franke FBFE WH MATT A70 UK Bedienungsanleitung

Franke

Franke GALAXY PLUS INOX - FGPL 1200 Bedienungsanleitung

Franke

Franke Maris Built Under FCBU 1204 2M C WH Bedienungsanleitung

Franke

Franke FTL 905 Bedienungsanleitung

Franke

Franke FTC 922 XS AU Bedienungsanleitung

Franke

Franke FBFE A52 Bedienungsanleitung

Franke

Franke FMA FL 605 Bedienungsanleitung

Franke

Franke FDF 9156 I XS H100 Bedienungsanleitung

Franke

Franke FDMO 607 I Bedienungsanleitung

Franke

Franke FGC 915 I XS H100 Bedienungsanleitung

Franke

Franke FBI 931H XS Bedienungsanleitung

Franke

Franke FCO 70 BK MATT Bedienungsanleitung

Franke

Franke FFC 905-P XS LED0 Bedienungsanleitung

Franke

Franke 792-17 T45 FRI Bedienungsanleitung

Franke

Franke FTLN H45 X/BK Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch