Freescale Semiconductor MPC8349E PowerQUICC II Pro Bedienungsanleitung

Rev. 1.6

12/2005

MPC8349E MDS Processor Board

User Manual

MPC8349E MDS Processor Board, Rev. 1.6

ii Freescale Semiconductor

Freescale Semiconductor MPC8349E MDS Processor Board User’s Manual 3

Section 1

General Information

1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.1 MPC8349E MDS Processor Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.2 Working Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.1.2.1 Stand-Alone: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.1.2.2 With PIB board (PIB Combined Mode): . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.1.2.3 PCI Add-On (Agent Mode): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.2 Definitions, Acronyms, and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.3 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.5 MPC8349E MDS Processor Board Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.6 External Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.7 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Section 2

Hardware Preparation and Installation

2.1 Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.2 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.2.1 Stand-Alone Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.2.3 For Agent Mode only : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Section 3

Memory Map

3.1 MPC8349E MDS Processor Board Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Section 4

Controls and Indicators

4.1 Switches and Jumpers Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.1.1 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.1.2 Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.1 LD1, LD2 - Signaling LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.2 LD3 - USB Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.3 LD4, LD5 - GETH Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.4 LD6 - DUART Enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.5 LD7 - FUNC Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.6 LD8 - Power GOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.7 LD9 - GPIO1-1 Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4 MPC8349E MDS Processor Board User’s Manual Freescale Semiconductor

4.2.8 LD10, LD11 - PCTL0,1 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.9 LD12 - BOOT Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.2.10 LD13 - 5V Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.3 Other Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Section 5

Functional Description

5.1 Reset & Reset - Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1.1 Power - On Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1.2 Hard Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

5.1.2.1 COP/JTAG Port Hard - Reset (stand-alone only) . . . . . . . . . . . . . . . . . . 34

5.1.2.2 Manual Hard Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.1.2.3 Manual Soft Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.2 Board Control & Status Registers – BCSR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.2.1 BCSR0 - Board Control / Status Register 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.2.2 BCSR1 - Board Control / Status Register 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2.3 BCSR2 - Board Control / Status Register 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.2.4 BCSR3 - Board Control / Status Register 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.2.5 BCSR4 - Board Control / Status Register 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.2.6 BCSR5 - Board Control / Status Register 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

5.2.7 BCSR6 - Board Misc. Register 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.2.8 BCSR7 - Board Misc. Register 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.2.9 BCSR8 - Board Misc. Register 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

5.2.10 BCSR10 - Board Status Register 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.2.11 BCSR11 - Board Status Register 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

5.2.12 CCR - COP Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

5.3 External Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.3.1 P1 - MiniAB USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.3.2 P2 - DUART Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5.3.3 Logic Analyzer Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.3.4 P5 - SMB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.3.5 P9 - Debug COP Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

5.3.6 P10 - FPGA’s In-System-Programming (ISP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

5.3.7 P11 - Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

5.3.8 J1,J2 - Ethernet Port Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Section 6

Clocking for the MPC8349E MDS Processor Board

6.1 MPC8349 as Host Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

6.2 MPC8349 as Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Freescale Semiconductor MPC8349E MDS Processor Board User’s Manual 5

Section 7

Replacing Devices

7.1 Replacing Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.1.1 Cleaning Flash Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

7.2 Replacing SODIMM units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

7.3 Replacing MSC8349E Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

6 MPC8349E MDS Processor Board User’s Manual Freescale Semiconductor

General Information

Freescale Semiconductor MPC8349E MDS Processor Board User’s Manual 7

General Information

1.1 Introduction

This document describes the MPC8349E MDS Processor Board, in its stand-alone operating

mode, in addition to its operating mode via a PCI slot in a PC, or its operating mode on the

“PowerQUICC MDS Platform I/O Board (PIB)”.

1.1.1 MPC8349E MDS Processor Board

The MPC8349E MDS Processor Board is an ADS that provides a complete debugging

environment for engineers developing applications for the MPC8349 series of Freescale

processors.

The MPC8349E is a cost-effective, general purpose integrated host processor that implements the

PowerPC™ architecture required for networking infrastructure, telecommunications, Wireless

LANs, and other embedded applications. The MPC8349E can also be used for control processing

in applications such as network routers and switches, mass storage subsystems, network

appliances, and print and imaging systems.

The MPC8349E MDS Processor Board includes various peripherals, such as data input/output

devices (GETH, USB, DUART), memories (DDR, SDRAM (optional), Serial EEPROM,

PSRAM (optional) & FLASH and BCSR’s registers), and control switches and LED indicators.

Using its on-board resources and debugging devices, a developer is able to upload code, run the

code, set breakpoints, display memory & registers and connect his own proprietary hardware to

be incorporated into a target system that uses the MPC8349E as a processor.

The software application developed for the MPC8349 can be run in a "bare bones" operation

(with only the MPC8349 processor), or with various input or output data streams, such as from

the GETH connection, PCI or the USB connections. Results can be analyzed using the Code

Warri or®debugger in addition to using other methods for directly analyzing the input or output

data stream. The BSP is built using the Linux OS.

This board can also be used as a demonstration tool for the developer. For instance, the

developer's application software may be programmed into its Flash memory and run in

exhibitions.

General Information

8 MPC8349E MDS Processor Board User’s Manual Freescale Semiconductor

1.1.2 Working Configurations

1.1.2.1 Stand-Alone:

The MPC8349E MDS Processor Board can be run in a stand-alone mode, like other ADS’s, with

direct connections to deubggers (via a JTAG/COP connector and JTAG/Parallel Port command

converter), power supply, and the GETH, MiniAB USB and Dual RS-232 (DUART) connections.

In this mode, the MPC8349E MDS Processor Board acts as a Host.

1.1.2.2 With PIB board (PIB Combined Mode):

The MPC8349E MDS Processor Board can be connected to the PIB, which allows it to be used in

a back plane, and provides room and connections for an additional USB board, and up to three

additional PCI cards. Each of the PCI cards provides a connection interface for an optional

additional processor board (from the MPC83xx family). This capability allows the MPC8349

processor on the MPC8349E MDS Processor Board to act as a master for up to three “slave”

processors in the MPC83xx family. In this mode, the MPC8349E MDS Processor Board acts as a

Host.

Voltage is provided by the PIB, which also provides additional signal connections via the back

plane (if used), and optical GETH connectors on the front plane side of the PIB. The MPC8349E

MDS Processor Board can be connected to a PC in this configuration (via a parallel port

connector), without needing an external command converter.

1.1.2.3 PCI Add-On (Agent Mode):

Using its PCI edge connector, the MPC8349E MDS Processor Board can be inserted in a PC.

Power and debugging are supplied from the PC (no command converter necessary). Other

external connections are the same as in the Stand-Alone Mode. In this mode, the MPC8349E

MDS Processor Board acts as an Agent.

General Information

Freescale Semiconductor MPC8349E MDS Processor Board User’s Manual 9

1.2 Definitions, Acronyms, and Abbreviations

ADS Application Development System

BCSR Board Control and Status Register

BRD Board Revision Detect (I2C EEPROM)

BSP Board Support Package

CCR COP Control Register (FPGA)

COP Common On-chip Processor (JTAG Debug Port)

CS Chip Select

CW Metrowerks Code Warrior®IDE for PowerPC

DAC Digital-to-Analog Converter

DDR Double Data Rate

DIP Dual-In-Line Package.

DMA Direct Memory Access

DUART Dual UART

EEPROM Electrical Eraseable Programmable Memory

FCFG Flash Configuration Select

FCI Type of Riser Connector

FLASH Non volatile reprogrammable memory.

FPGA Field-Programmable Gate Array

GbE Gigabit Ethernet

GETH Gigabit Ethernet

GPCM General Purpose Chip-select Machine

GPL General Purpose Line

I2C Philips Semi Serial Bus

LED Light Emitting Diode

lsb least significant bit

MII Media Independent Interface

GMII General Media Independent Interface

JTAG Joint Test Access Group

OTG On-the-Go

PC IBM-compatible Personal Computer

General Information

10 MPC8349E MDS Processor Board User’s Manual Freescale Semiconductor

1.3 Related Documentation

• MPC8349 HW Specification

• MPC8349 User’s Manual

• PowerQUICC MDS Platform I/O Board User’s Manual

• MPC8349 Getting Started

1.4 Specifications

The MPC8349E MDS Processor Board specifications are given in Table 1-1.

PCI Peripheral Components Interconnect

Phy Physical Layer

PIB Platform I/O Board - expands the ADS functionality.

PSRAM Pseudo-Static Random Access Memory

PSU Power Supply Unit

RCWL,

RCWH

Reset Configuration Word Low/High

RGMII Reduced General Media Independent Interface

RTC Real Time Clock

SDRAM Synchronous Dynamic Random Access Memory

SMB Type of Mini-RF connector

SODIMM Mini DIMM Form Factor

SPD Serial Present Detect

TBD To Be Defined

TSEC Triple Speed Ethernet Controller

ULPI UTMI+ Low Pin Interface

UPM User Programmable Machine

USB Universal Serial Bus

ZD Zero Delay clock buffer, with internal PLL for skew elimination

Andere Handbücher für MPC8349E PowerQUICC II Pro

Inhaltsverzeichnis

Andere Freescale Semiconductor Computerhardware Handbücher

Freescale Semiconductor

Freescale Semiconductor TWR-LS1021A Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor TWR-S12G64 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor SC140 DSP Core Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor i.MX 6SoloLite Linux Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor TWR-K20D50M Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor Demonstration Board DEMO9S08AC60E Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5604P Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC68HC908MR16 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC850 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MC68HC08KH12 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor 56F827 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor M9328MX21ADSE Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC5200B Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC8349EA MDS Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC8569E-MDS-PB Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MCF5329 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor TWR-K60N512 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor USB-KW24D512 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor Target Interface MMDS0508 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC8309 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor PowerPC MPC823 Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MTRCKTSPS5604P Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor TWR-MCF51QM Bedienungsanleitung

Freescale Semiconductor

Freescale Semiconductor MPC8272ADS Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung